Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.3721
- +
Ext. Price(USD):$11,302.33
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 48 POS 2mm Solder RA Thru-Hole Milli-Grid™ Tube
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$4.4625
1,000+$4.3875
2,500+$3.8125
5,000+$3.55
- +
Ext. Price(USD):$2,231.25
MOQ:500
Mult:500
SPQ:500
Conn Shrouded Header HDR 16 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
420
Estimated Ship Time:6-7 working days
20+$0.6885
- +
Ext. Price(USD):$13.77
MOQ:20
Mult:20
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7538
- +
Ext. Price(USD):$1,130.70
MOQ:1,500
Mult:500
SPQ:500
Conn Unshrouded Header HDR 2 POS 5mm Solder RA Thru-Hole Carton
Available Stock
377
Estimated Ship Time:6-12 working days
25+$0.6196
50+$0.6196
1,000+$0.5353
2,500+$0.5353
- +
Ext. Price(USD):$24.16
MOQ:39
Mult:1
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.0439
- +
Ext. Price(USD):$2,759.26
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.4665
- +
Ext. Price(USD):$1,259.55
MOQ:2,700
Mult:900
SPQ:900
Molex
ECAD Model:
Shrouded Header HDR 9-Pin 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$2.4625
8,100+$2.1625
20,700+$2.125
- +
Ext. Price(USD):$8,865.00
MOQ:3,600
Mult:3,600
Conn Wire to Board HDR 8 POS 2.54mm Solder ST SMD
Pre-order
33,800
Factory Lead Time:22-26 weeks
338+$4.2625
675+$4.05
1,000+$3.5375
2,500+$3.2875
5,000+$3.1375
- +
Ext. Price(USD):$1,440.72
MOQ:338
Mult:338
SPQ:338
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.6695
- +
Ext. Price(USD):$6,002.55
MOQ:900
Mult:900
SPQ:300
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.1456
- +
Ext. Price(USD):$5,842.56
MOQ:5,100
Mult:5,100
SPQ:1,700
3M
ECAD Model:
Wire-to-Board Connector
Available Stock
1
Estimated Ship Time:3-5 working days
1+$22.386
250+$17.9088
500+$14.924
- +
Ext. Price(USD):$22.38
MOQ:1
Mult:1
SPQ:500
Pre-order
200,000
Factory Lead Time:16-18 weeks
20,000+$0.4176
- +
Ext. Price(USD):$8,352.00
MOQ:20,000
Mult:20,000
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 8 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
20
Estimated Ship Time:3-5 working days
15+
10+$0.2174
50+$0.2117
100+$0.2042
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Conn Unshrouded Header HDR 5 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
750
Estimated Ship Time:4-6 working days
250+$0.389
- +
Ext. Price(USD):$97.25
MOQ:250
Mult:250
SPQ:250
Conn Wire to Board HDR 5 POS 2.54mm Solder ST Top Entry Thru-Hole Package
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$0.6875
5,000+$0.65
10,000+$0.6375
25,000+$0.525
- +
Ext. Price(USD):$1,718.75
MOQ:2,500
Mult:2,500
SPQ:2,500
Pre-order
132,000
Factory Lead Time:22-26 weeks
1,320+$5.375
5,005+$5.025
10,010+$4.7125
- +
Ext. Price(USD):$7,095.00
MOQ:1,320
Mult:1,320
SPQ:1,320
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6337
- +
Ext. Price(USD):$760.44
MOQ:1,200
Mult:1,200
SPQ:400
Conn Shrouded Header HDR 3 POS 2mm Solder RA SMD
Available Stock
7,960
Estimated Ship Time:6-7 working days
22+
20+$0.587
800+$0.0899
- +
Ext. Price(USD):$11.74
MOQ:20
Mult:20
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5965
- +
Ext. Price(USD):$2,155.27
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$1.4711
- +
Ext. Price(USD):$3,707.17
MOQ:2,520
Mult:2,520
SPQ:2,520
JST
ECAD Model:
Conn IDC Connector F 11 POS 1.5mm IDT RA Cable Mount Box
Available Stock
21,580
Estimated Ship Time:6-7 working days
21+
20+$0.1957
1,000+$0.079
- +
Ext. Price(USD):$3.91
MOQ:20
Mult:20
Conn Shrouded Header HDR 4 POS 2.54mm Solder ST Top Entry Thru-Hole Carton
Pre-order
840,000
Factory Lead Time:22-26 weeks
8,400+$0.6125
10,000+$0.5625
25,000+$0.5
- +
Ext. Price(USD):$5,145.00
MOQ:8,400
Mult:8,400
SPQ:8,400
Wire-to-Board Connector HDR 22 POS 3mm Solder ST Top Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.345
- +
Ext. Price(USD):$3,165.75
MOQ:1,350
Mult:1,350
SPQ:450
Minitek PWR 3.0 Wire-to-Board Connector, Header, Dual Row
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.8733
- +
Ext. Price(USD):$2,528.95
MOQ:1,350
Mult:1,350
SPQ:450
25 / PageGoto