Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Board to Board RCP 24 POS 0.4mm Solder ST SMD T/R
Available Stock
91
Estimated Ship Time:3-5 working days
07+
10+$1.4858
30+$1.461
50+$1.4097
- +
Ext. Price(USD):$14.85
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Connector HDR, 22 Pos, 2.54mm Pitch, Solder, Right Angle, Thru-Hole
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$2.9625
10,000+$2.875
25,000+$2.4
- +
Ext. Price(USD):$14,812.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.5317
- +
Ext. Price(USD):$5,438.04
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.7835
- +
Ext. Price(USD):$705.15
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.8485
- +
Ext. Price(USD):$5,818.20
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, 10 Pos, SMT Tails, Hold Down, Gold Flash, Black, Non-Glow, Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.2831
- +
Ext. Price(USD):$7,698.60
MOQ:6,000
Mult:6,000
SPQ:1,000
Wire-to-Board HDR 27 Pos 2.54mm Solder RA Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$3.6
1,000+$3.4125
2,500+$3.1625
5,000+$3.025
10,000+$2.925
- +
Ext. Price(USD):$1,800.00
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
Coeur CST High Current Male Pin Screw Mounted 6.00mm Dia 27.40mm L
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$3.1375
4,000+$2.7375
10,000+$2.6875
- +
Ext. Price(USD):$4,706.25
MOQ:1,500
Mult:1,500
Molex
ECAD Model:
2.00mm Pitch Igrid PCB Header, Dual Row Right Angle TH, 0.10μm Gold Au Plating, Positive Lock, 34 Circuits, Tray, 3.20mm Pc Tail Length, Black
Pre-order
90,000
Factory Lead Time:22-26 weeks
900+$3
2,000+$2.625
5,000+$2.5625
- +
Ext. Price(USD):$2,700.00
MOQ:900
Mult:900
Wire-to-Board Connector Receptacle 1 Pos Solder RA Thru-Hole
Available Stock
97
Estimated Ship Time:6-12 working days
1+$5.1875
10+$4.648
500+$4.482
1,000+$4.482
- +
Ext. Price(USD):$25.93
MOQ:5
Mult:1
JST
ECAD Model:
Conn IDC Connector RCP 8 POS 3.96mm IDT ST Cable Mount Bag
Pre-order
30,000
Factory Lead Time:16-18 weeks
3,000+$0.748
- +
Ext. Price(USD):$2,244.00
MOQ:3,000
Mult:3,000
Conn Shrouded Header HDR 12 POS 2mm Solder ST Thru-Hole Box
Available Stock
4,591
Estimated Ship Time:6-7 working days
22+
20+$0.6622
300+$0.2801
- +
Ext. Price(USD):$13.24
MOQ:20
Mult:20
JST
ECAD Model:
Conn IDC Connector SKT 9 POS 1.25mm IDT RA Cable Mount Box
Pre-order
168,000
Factory Lead Time:18-22 weeks
26+
16,800+$0.1021
50,400+$0.1004
84,000+$0.0979
- +
Ext. Price(USD):$1,715.28
MOQ:16,800
Mult:16,800
SPQ:16,800
JST
ECAD Model:
Available Stock
23,000
Estimated Ship Time:6-7 working days
25+
1,000+$0.1358
- +
Ext. Price(USD):$135.80
MOQ:1,000
Mult:1,000
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
17,711
Estimated Ship Time:6-7 working days
21+
20+$0.1861
1,000+$0.0796
- +
Ext. Price(USD):$3.72
MOQ:20
Mult:20
BergStik®, Board-to-Board Connector, Unshrouded Vertical Header, TH, Single Row, 2 Pos, 2.54mm (0.100in) Pitch
Pre-order
5,000,000
Factory Lead Time:8 weeks
10,000+$0.2263
- +
Ext. Price(USD):$2,263.00
MOQ:10,000
Mult:5,000
SPQ:5,000
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$1.85
1,920+$1.6625
5,024+$1.55
10,016+$1.4625
- +
Ext. Price(USD):$1,776.00
MOQ:960
Mult:960
SPQ:960
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.6581
- +
Ext. Price(USD):$888.43
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Board to Board Connector PL 30 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
38
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4241
- +
Ext. Price(USD):$1,281.69
MOQ:900
Mult:300
SPQ:300
Unshrouded Header, 3 Pos, 2.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.2401
- +
Ext. Price(USD):$4.80
MOQ:20
Mult:20
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Right Angle TH 2.00um Gold Au Plating without Peg 4.60mm PC Tail Length P&P Tape 12 Circuits Glow Wire Capable Tube
Pre-order
518,400
Factory Lead Time:22-26 weeks
5,184+$1.0875
- +
Ext. Price(USD):$5,637.60
MOQ:5,184
Mult:5,184
SPQ:5,184
Molex
ECAD Model:
Board to Board Connector, 80 Pos, 0.5mm Pitch, Solder, Straight, SMD, SlimStack, T/R
Available Stock
20
Estimated Ship Time:3-5 working days
15+
10+$0.9781
30+$0.9523
50+$0.9188
- +
Ext. Price(USD):$9.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.2047
- +
Ext. Price(USD):$2,168.46
MOQ:1,800
Mult:1,800
SPQ:600
025 SLD 3P PLUG ASSY
Available Stock
800
Estimated Ship Time:4-6 working days
100+$0.3611
200+$0.355
400+$0.3473
- +
Ext. Price(USD):$36.11
MOQ:100
Mult:100
SPQ:800
25 / PageGoto