Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Unshrouded Header HDR 3 POS 5mm Solder ST Thru-Hole Box
Available Stock
8,439
Estimated Ship Time:6-7 working days
22+
20+$0.3253
1,000+$0.1106
- +
Ext. Price(USD):$6.50
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Shrouded Header HDR 12 POS 1.5mm Solder RA Side Entry SMD CLIK-Mate T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.925
8,000+$0.825
20,000+$0.8
- +
Ext. Price(USD):$2,775.00
MOQ:3,000
Mult:3,000
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.5337
- +
Ext. Price(USD):$2,760.66
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1518
- +
Ext. Price(USD):$2,904.93
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9714
- +
Ext. Price(USD):$1,311.39
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header HDR 15 POS 1mm Solder ST Thru-Hole Box
Available Stock
204
Estimated Ship Time:6-7 working days
20+$0.4694
- +
Ext. Price(USD):$9.38
MOQ:20
Mult:20
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4649
- +
Ext. Price(USD):$697.35
MOQ:1,500
Mult:1,500
SPQ:500
Header, 1.50mm Pitch, Surface Mount, Vertical, 4 Circuits
Pre-order
1,000,000
Factory Lead Time:6-8 weeks
26+
10,000+$0.5216
30,000+$0.5007
50,000+$0.4798
- +
Ext. Price(USD):$5,216.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Molex
ECAD Model:
Conn Board to Board RCP 5Power/25Signal Pos 2mm/5.5mm/7.5mm Solder RA Thru-Hole Tray
Pre-order
60,000
Factory Lead Time:22 weeks
600+$11.1171
1,200+$10.9318
- +
Ext. Price(USD):$6,670.26
MOQ:600
Mult:600
SPQ:600
Wire-to-Board Connector, Header, 6 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH, Tray
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$0.5571
- +
Ext. Price(USD):$1,403.89
MOQ:2,520
Mult:2,520
SPQ:840
Wire-to-Board Connector HDR 22 POS 3mm Solder ST Top Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.016
- +
Ext. Price(USD):$2,721.60
MOQ:1,350
Mult:1,350
SPQ:450
Conn Socket Strip SKT 5 POS 2.54mm Solder ST SMD T/R
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$2.475
500+$2.075
750+$1.75
5,000+$1.2375
10,000+$1.175
- +
Ext. Price(USD):$618.75
MOQ:250
Mult:250
SPQ:250
Molex
ECAD Model:
Conn Unshrouded Header HDR 21 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid III Tray
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.775
3,000+$1.6875
- +
Ext. Price(USD):$2,662.50
MOQ:1,500
Mult:1,500
SPQ:1,500
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.2124
- +
Ext. Price(USD):$6,254.88
MOQ:1,200
Mult:1,200
SPQ:400
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.5773
- +
Ext. Price(USD):$9,463.80
MOQ:6,000
Mult:6,000
SPQ:600
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.3701
- +
Ext. Price(USD):$1,849.63
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header HDR 16 POS 1.5mm Solder ST SMD T/R
Available Stock
1,014
Estimated Ship Time:14-17 working days
10+$1.9166
50+$1.2248
2,000+$0.8746
4,000+$0.8712
- +
Ext. Price(USD):$51.74
MOQ:27
Mult:1
SPQ:1
Molex
ECAD Model:
Ten60 Vt Recpt Assy G-5AC-15S-G
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$15.175
1,200+$13.2875
2,400+$13
- +
Ext. Price(USD):$9,105.00
MOQ:600
Mult:600
JST
ECAD Model:
Plug Housing, 12 Circuits
Available Stock
479
Estimated Ship Time:4-6 working days
1+$0.2965
- +
Ext. Price(USD):$0.29
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Connector, Header, 6 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH, Tray
Pre-order
345,000
Factory Lead Time:15 weeks
690+$2.3886
- +
Ext. Price(USD):$1,648.13
MOQ:690
Mult:690
SPQ:690
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.5425
- +
Ext. Price(USD):$971.77
MOQ:630
Mult:630
SPQ:315
Unshrouded Header, 20-Pos, 2.54mm, Solder, ST, Thru-Hole
Available Stock
220
Estimated Ship Time:6-12 working days
1+$3.7345
10+$3.3461
500+$3.2266
1,000+$3.2266
- +
Ext. Price(USD):$26.14
MOQ:7
Mult:1
Headers and PCB Receptacles Connector
Available Stock
620
Estimated Ship Time:14-17 working days
100+$0.461
500+$0.4509
1,000+$0.4246
2,000+$0.4037
4,000+$0.4013
- +
Ext. Price(USD):$50.24
MOQ:109
Mult:1
SPQ:1
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5895
- +
Ext. Price(USD):$1,430.55
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 16-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.5024
- +
Ext. Price(USD):$2,839.53
MOQ:1,890
Mult:1,890
SPQ:630
25 / PageGoto