Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Minitek 1.80mm WTB Connector USCAR 2 V2 Right Angle TH 20-Pin Header D Coding
Pre-order
1,600,000
Factory Lead Time:12 weeks
3,200+$1.8123
- +
Ext. Price(USD):$5,799.36
MOQ:3,200
Mult:800
SPQ:800
Minitek PWR 4.2 Wire-to-Board Connector, Dual Row Header
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.5936
- +
Ext. Price(USD):$7,551.36
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
360,000
Factory Lead Time:15 weeks
720+$7.7227
- +
Ext. Price(USD):$5,560.34
MOQ:720
Mult:720
SPQ:360
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.7029
- +
Ext. Price(USD):$11,748.91
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.2269
- +
Ext. Price(USD):$8,304.21
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 15 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
100
Estimated Ship Time:14-17 working days
10+$2.8085
30+$2.2331
500+$1.6766
1,000+$1.6696
- +
Ext. Price(USD):$50.55
MOQ:18
Mult:1
SPQ:1
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
2,700,000
Factory Lead Time:15 weeks
5,400+$1.7531
- +
Ext. Price(USD):$9,466.74
MOQ:5,400
Mult:5,400
SPQ:1,800
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$0.9383
- +
Ext. Price(USD):$1,435.59
MOQ:1,530
Mult:1,530
SPQ:765
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7642
- +
Ext. Price(USD):$917.04
MOQ:1,200
Mult:400
SPQ:400
Molex
ECAD Model:
Conn Wire to Board HDR 9 POS 1.5mm Solder ST Top Entry SMD Pico-SPOX T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.4125
6,000+$0.3663
- +
Ext. Price(USD):$1,237.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Molex
ECAD Model:
Conn Board to Board RCP 22 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.3912
50+$0.3846
100+$0.3712
- +
Ext. Price(USD):$3.91
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0898
- +
Ext. Price(USD):$1,307.76
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$4.1887
- +
Ext. Price(USD):$6,785.69
MOQ:1,620
Mult:1,620
SPQ:540
Pre-order
660,000
Factory Lead Time:22-26 weeks
6,600+$2.375
10,010+$2.25
25,003+$2.1375
- +
Ext. Price(USD):$15,675.00
MOQ:6,600
Mult:6,600
SPQ:6,600
Wire to Board HDR 8 POS 3mm Solder RA Side Entry TH T/R
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$0.5484
- +
Ext. Price(USD):$1,645.20
MOQ:3,000
Mult:1,000
SPQ:1,000
Wire-to-Board Header 12 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$4.0337
- +
Ext. Price(USD):$6,534.59
MOQ:1,620
Mult:1,620
SPQ:540
Conn Shrouded Header (4 Sides) HDR 16 POS 1.25mm Solder RA Side Entry SMD T/R
Available Stock
90
Estimated Ship Time:4-6 working days
26+
1+$1.9481
- +
Ext. Price(USD):$1.94
MOQ:1
Mult:1
SPQ:1
Lumberg
ECAD Model:
IDC Connector SKT 16 POS 1.27mm IDT RA Side Entry Cable Mount Micromodul™ Box
Available Stock
707
Estimated Ship Time:6-12 working days
10+$0.7927
100+$0.7266
500+$0.7266
1,000+$0.7134
2,500+$0.7134
- +
Ext. Price(USD):$24.57
MOQ:31
Mult:1
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.5711
- +
Ext. Price(USD):$685.32
MOQ:1,200
Mult:1,200
SPQ:400
Pre-order
210,000
Factory Lead Time:22-26 weeks
2,100+$2.3375
5,250+$2.175
10,150+$2.0375
- +
Ext. Price(USD):$4,908.75
MOQ:2,100
Mult:2,100
SPQ:2,100
High Power DIP Header Connector
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$2.1187
- +
Ext. Price(USD):$10,805.37
MOQ:5,100
Mult:5,100
SPQ:1,700
JST
ECAD Model:
Conn Shrouded Header HDR 14 POS 1.25mm Solder ST SMD T/R
Pre-order
100,000
Factory Lead Time:18-22 weeks
26+
10,000+$0.8278
30,000+$0.814
50,000+$0.7934
- +
Ext. Price(USD):$8,278.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6285
- +
Ext. Price(USD):$1,131.30
MOQ:1,800
Mult:1,800
SPQ:600
Conn Unshrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$2.275
5,000+$1.675
10,000+$1.3
50,000+$1.075
100,000+$0.925
- +
Ext. Price(USD):$5,460.00
MOQ:2,400
Mult:2,400
SPQ:2,400
JST
ECAD Model:
Wire-to-Board Connector HDR 12-Pin 3.96mm Solder Straight Thru-Hole
Pre-order
18,000
Factory Lead Time:18-22 weeks
26+
1,800+$0.6622
5,400+$0.6512
9,000+$0.6347
- +
Ext. Price(USD):$1,191.96
MOQ:1,800
Mult:1,800
SPQ:1,800
25 / PageGoto