Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.322
- +
Ext. Price(USD):$966.00
MOQ:3,000
Mult:1,500
SPQ:500
JST
ECAD Model:
Shrouded Header HDR 4 Pos 2.5mm Solder ST Thru-Hole Box
Available Stock
4,500
Estimated Ship Time:4-6 working days
500+$0.0941
- +
Ext. Price(USD):$47.05
MOQ:500
Mult:500
SPQ:500
Latch Header with Short Latch, Straight, Au Flash
Available Stock
2,782
Estimated Ship Time:6-12 working days
10+$0.685
50+$0.685
500+$0.6028
1,500+$0.6028
- +
Ext. Price(USD):$27.40
MOQ:40
Mult:10
Shrouded Header (4 Sides), HDR 2 POS, 2mm Pitch, Solder, ST Top Entry, Thru-Hole, Box
Available Stock
22,950
Estimated Ship Time:6-7 working days
22+
20+$0.06
1,000+$0.0305
- +
Ext. Price(USD):$1.20
MOQ:20
Mult:20
Minitek Reg Pwr 3.0 Wire-to-Board Conn Header Dual Row Vertical SMT Tails Hold Down Gold Flash Black 16 Pos Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.8071
- +
Ext. Price(USD):$10,842.60
MOQ:6,000
Mult:6,000
SPQ:600
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 2 POS 2mm Solder ST SMD Tube
Pre-order
103,500
Factory Lead Time:22-26 weeks
1,035+$2.65
2,070+$2.5
- +
Ext. Price(USD):$2,742.75
MOQ:1,035
Mult:1,035
SPQ:1,035
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 10 POS 2mm Solder RA Side Entry Thru-Hole Box
Available Stock
4,750
Estimated Ship Time:4-6 working days
22+
250+$0.4532
- +
Ext. Price(USD):$113.30
MOQ:250
Mult:250
SPQ:250
JST
ECAD Model:
Unshrouded Header, HDR, 10 POS, 2.54mm, Solder, RA, Thru-Hole
Available Stock
11
Estimated Ship Time:4-6 working days
26+
11+$1.771
- +
Ext. Price(USD):$19.48
MOQ:11
Mult:11
SPQ:1
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder RA Thru-Hole Box/Tube
Pre-order
450,000
Factory Lead Time:22-26 weeks
4,500+$0.475
9,000+$0.45
10,020+$0.4
25,020+$0.3288
50,010+$0.3175
- +
Ext. Price(USD):$2,137.50
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.29
- +
Ext. Price(USD):$1,548.00
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8287
- +
Ext. Price(USD):$1,118.74
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
100
Estimated Ship Time:4-6 working days
26+
10+$1.2396
- +
Ext. Price(USD):$12.39
MOQ:10
Mult:10
SPQ:1
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3903
- +
Ext. Price(USD):$3,226.90
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header (4 Sides) HDR 40 POS 1mm Solder ST SMD T/R
Pre-order
37,500
Factory Lead Time:18-22 weeks
26+
3,750+$0.7975
11,250+$0.7842
18,750+$0.7643
- +
Ext. Price(USD):$2,990.62
MOQ:3,750
Mult:3,750
SPQ:3,750
Molex
ECAD Model:
Appli Mate RAST 2.5 Female Connector 2.50mm Pitch 4 Circuits Fully Coded Open Endwalls Zeus Housing Glow Wire Capable
Pre-order
1,920,000
Factory Lead Time:22-26 weeks
19,200+$0.3588
40,000+$0.3138
100,000+$0.3075
- +
Ext. Price(USD):$6,888.96
MOQ:19,200
Mult:19,200
Wire-to-Board Header 14 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.3318
- +
Ext. Price(USD):$2,876.68
MOQ:2,160
Mult:2,160
SPQ:720
Wire-to-Board Connector Header 24 Pos 3mm Solder Straight Top Entry Thru-Hole
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5383
- +
Ext. Price(USD):$3,426.70
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
84,000
Factory Lead Time:22-26 weeks
840+$2.575
1,680+$2.4375
5,012+$2.2625
10,024+$2.1375
- +
Ext. Price(USD):$2,163.00
MOQ:840
Mult:840
SPQ:840
Shrouded Header (4 Sides) HDR 8 POS 3.5mm Solder ST Top Entry Thru-Hole
Available Stock
68
Estimated Ship Time:6-12 working days
25+$0.8
50+$0.768
1,000+$0.6912
2,500+$0.6912
- +
Ext. Price(USD):$24.00
MOQ:30
Mult:1
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1212
- +
Ext. Price(USD):$2,018.16
MOQ:1,800
Mult:1,800
SPQ:600
Minitek PWR 3.0 Wire-to-Board Connector, Header, Dual Row
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.3551
- +
Ext. Price(USD):$2,876.31
MOQ:8,100
Mult:2,700
SPQ:2,700
USB3.2 Gen2x1 (SAS) PCIe 4.0 68-Pin Socket Right Angle Reverse SIO Pin
Pre-order
2,700,000
Factory Lead Time:12 weeks
5,400+$8.2155
- +
Ext. Price(USD):$44,363.70
MOQ:5,400
Mult:600
SPQ:600
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.3481
- +
Ext. Price(USD):$4,813.29
MOQ:900
Mult:450
SPQ:450
JST
ECAD Model:
Conn Wire to Board SKT 11 POS 1mm IDT ST Cable Mount Box
Available Stock
3,160
Estimated Ship Time:6-7 working days
20+$0.3696
- +
Ext. Price(USD):$7.39
MOQ:20
Mult:20
Conn Shrouded Header HDR 6 POS 1.5mm Solder ST SMD T/R
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$0.4
25,000+$0.3288
1,000,000+$0.2188
2,000,000+$0.2075
- +
Ext. Price(USD):$8,000.00
MOQ:20,000
Mult:20,000
25 / PageGoto