Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9314
- +
Ext. Price(USD):$1,117.68
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Pre-order
45,000
Factory Lead Time:22-26 weeks
450+$0.475
1,800+$0.45
- +
Ext. Price(USD):$213.75
MOQ:450
Mult:450
SPQ:450
Wire to Board HDR 18 POS 2.54mm Solder RA Thru-Hole
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$6.2125
2,500+$5.775
5,000+$5.5125
10,000+$5.325
25,000+$4.45
- +
Ext. Price(USD):$6,212.50
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6512
- +
Ext. Price(USD):$1,172.16
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$6.9185
- +
Ext. Price(USD):$9,339.97
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.8582
- +
Ext. Price(USD):$2,317.14
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4822
- +
Ext. Price(USD):$723.30
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.2419
- +
Ext. Price(USD):$6,290.28
MOQ:1,200
Mult:1,200
SPQ:400
Aptiv
ECAD Model:
RCPT HOUSING, 32POS, PBT GF, BROWN; Product Range:CMC GTS Series; Gender:Receptacle; No. of Positions:32Ways; For Use With:Aptiv GTS Series Automotive Contacts; Connector Body Material:PBT (Polybutylene Terephthalate), G
Available Stock
452
Estimated Ship Time:6-12 working days
1+$3.2495
10+$2.9116
500+$2.8076
1,000+$2.8076
- +
Ext. Price(USD):$25.99
MOQ:8
Mult:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8096
- +
Ext. Price(USD):$1,214.40
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Connector Header 24 Pos 3mm Solder Straight Top Entry Thru-Hole
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1379
- +
Ext. Price(USD):$2,886.16
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 22 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
360,000
Factory Lead Time:15 weeks
720+$7.2423
- +
Ext. Price(USD):$5,214.45
MOQ:720
Mult:720
SPQ:240
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$3.3879
- +
Ext. Price(USD):$6,403.13
MOQ:1,890
Mult:1,890
SPQ:630
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
80
Estimated Ship Time:3-5 working days
24+
10+$0.0606
30+$0.059
50+$0.057
- +
Ext. Price(USD):$0.60
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Pre-order
45,000
Factory Lead Time:22-26 weeks
450+$14.9125
1,200+$13.0375
3,000+$12.775
- +
Ext. Price(USD):$6,710.62
MOQ:450
Mult:450
Wire-to-Board HDR 12 Pos 4.2mm Solder ST Top Entry TH Tray
Pre-order
337,500
Factory Lead Time:15 weeks
675+$4.6831
- +
Ext. Price(USD):$3,161.09
MOQ:675
Mult:675
SPQ:675
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.8096
- +
Ext. Price(USD):$728.64
MOQ:900
Mult:900
SPQ:450
Lumberg
ECAD Model:
Conn Shrouded Header HDR 3 POS 5mm Solder ST Thru-Hole Box
Pre-order
200,000
Factory Lead Time:8-10 weeks
2,000+$0.4584
- +
Ext. Price(USD):$916.80
MOQ:2,000
Mult:200
SPQ:200
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.1619
- +
Ext. Price(USD):$6,194.28
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.9192
- +
Ext. Price(USD):$1,378.80
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 9 POS 2mm Solder ST Thru-Hole Tube
Pre-order
18,000
Factory Lead Time:22-26 weeks
180+$2.8125
720+$2.65
- +
Ext. Price(USD):$506.25
MOQ:180
Mult:180
SPQ:180
CJT
ECAD Model:
Pin Header 1.27mm Pitch TH Right Angle 2 Circuits
Pre-order
1,000,000
Factory Lead Time:3-5 weeks
26+
10,000+$0.0263
30,000+$0.0252
50,000+$0.0242
- +
Ext. Price(USD):$263.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Conn Shrouded Header HDR 4 POS 2.5mm Solder RA Thru-Hole Box
Pre-order
28,000
Factory Lead Time:18-22 weeks
26+
2,800+$2.3694
8,400+$2.3298
14,000+$2.2706
- +
Ext. Price(USD):$6,634.32
MOQ:2,800
Mult:2,800
SPQ:2,800
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.2942
- +
Ext. Price(USD):$882.60
MOQ:3,000
Mult:1,500
SPQ:500
JST
ECAD Model:
Pre-order
180,000
Factory Lead Time:18-22 weeks
26+
18,000+$0.0912
54,000+$0.0897
90,000+$0.0874
- +
Ext. Price(USD):$1,641.60
MOQ:18,000
Mult:18,000
SPQ:18,000
25 / PageGoto