Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4892
- +
Ext. Price(USD):$733.80
MOQ:1,500
Mult:1,500
SPQ:500
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$11
1,000+$8.4625
50,000+$5.75
100,000+$5.5875
- +
Ext. Price(USD):$3,300.00
MOQ:300
Mult:300
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1107
- +
Ext. Price(USD):$1,332.84
MOQ:1,200
Mult:1,200
SPQ:400
Minitek PWR 3.0 Wire-to-Board Connector, Header, Dual Row
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.6929
- +
Ext. Price(USD):$2,338.53
MOQ:3,375
Mult:3,375
SPQ:1,125
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.8485
- +
Ext. Price(USD):$5,818.20
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Vertical SMT Tails And Hold Down 15 Gold Plating Natural Color 2 Positions Non Glow Wire Compatible
Pre-order
4,500,000
Factory Lead Time:13 weeks
9,000+$0.8861
- +
Ext. Price(USD):$7,974.90
MOQ:9,000
Mult:9,000
SPQ:1,800
Conn Unshrouded Header HDR 5 POS 2.54mm Solder ST Top Entry Thru-Hole Automotive Carton
Pre-order
72,000
Factory Lead Time:22-26 weeks
720+$2.075
1,440+$1.9625
5,000+$1.45
10,000+$1.125
50,000+$0.925
- +
Ext. Price(USD):$1,494.00
MOQ:720
Mult:720
SPQ:720
JST
ECAD Model:
Wire to Board Connector HDR 4 Pos 3.96mm Solder Straight Top Entry Thru-Hole Box
Available Stock
9,061
Estimated Ship Time:4-6 working days
1+$0.0988
500+$0.0913
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1
multicomp
ECAD Model:
Wire-to-Board HDR 4 Pos 3.5mm Solder ST Top Entry TH
Available Stock
78
Estimated Ship Time:6-12 working days
1+$0.8539
250+$0.8387
500+$0.8387
1,000+$0.8234
5,000+$0.8234
- +
Ext. Price(USD):$24.76
MOQ:29
Mult:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.5104
- +
Ext. Price(USD):$3,765.60
MOQ:1,500
Mult:1,500
SPQ:500
Conn Board to Board PL 20 POS 0.5mm Solder ST Top Entry SMD T/R
Available Stock
20
Estimated Ship Time:6-7 working days
20+$2.885
- +
Ext. Price(USD):$57.70
MOQ:20
Mult:20
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6512
- +
Ext. Price(USD):$1,758.24
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board CT HDR ASSY H 5P BLUE
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$0.2863
16,000+$0.27
25,000+$0.2238
50,000+$0.215
100,000+$0.2075
- +
Ext. Price(USD):$2,290.40
MOQ:8,000
Mult:8,000
SPQ:8,000
IDC Connector F 40 POS 2.54mm IDT RA Side Entry Cable Mount
Available Stock
901
Estimated Ship Time:6-12 working days
10+$0.585
100+$0.5242
1,000+$0.5148
2,500+$0.5148
- +
Ext. Price(USD):$29.25
MOQ:50
Mult:10
Wire-to-Wire HDR 18 Pos 1.5mm ST Cable Mount Box
Available Stock
2,133
Estimated Ship Time:6-7 working days
22+
20+$0.5769
150+$0.2332
- +
Ext. Price(USD):$11.53
MOQ:20
Mult:20
Header Housing Assy EP 2.5 RA 5 Pos.
Available Stock
8,000
Estimated Ship Time:5-7 working days
50+$0.3263
1,000+$0.2422
5,000+$0.1934
- +
Ext. Price(USD):$16.31
MOQ:50
Mult:1
SPQ:8,000
Conn Shrouded Header HDR 8 POS 2mm Solder ST SMD
Available Stock
1,803
Estimated Ship Time:6-7 working days
22+
20+$0.5627
700+$0.2402
- +
Ext. Price(USD):$11.25
MOQ:20
Mult:20
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.6629
- +
Ext. Price(USD):$4,395.48
MOQ:1,200
Mult:1,200
SPQ:400
Pcb Mount Receptacle Vertical Board To Board 6 Position 2mm Shrouded Tin
Pre-order
350,000
Factory Lead Time:22-26 weeks
3,500+$1.0625
5,600+$0.9875
10,500+$0.9375
- +
Ext. Price(USD):$3,718.75
MOQ:3,500
Mult:3,500
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$3.5481
- +
Ext. Price(USD):$5,428.59
MOQ:1,530
Mult:1,530
SPQ:765
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$1.2935
- +
Ext. Price(USD):$1,396.98
MOQ:1,080
Mult:1,080
SPQ:360
Unshrouded Header HDR 2 POS 2.54mm Solder ST Thru-Hole
Available Stock
741
Estimated Ship Time:14-17 working days
500+$0.0973
1,000+$0.0826
10,000+$0.0678
30,000+$0.0667
- +
Ext. Price(USD):$50.01
MOQ:514
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 7 POS 2.5mm Solder RA Side Entry Thru-Hole Box
Available Stock
1,600
Estimated Ship Time:3-5 working days
20+
200+$0.1192
- +
Ext. Price(USD):$23.84
MOQ:200
Mult:200
SPQ:200
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.914
- +
Ext. Price(USD):$1,645.20
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3378
- +
Ext. Price(USD):$1,013.40
MOQ:3,000
Mult:1,500
SPQ:500
25 / PageGoto