Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Unshrouded Header HDR 2 POS 2.54mm Solder RA Side Entry Thru-Hole
Available Stock
2,000
Estimated Ship Time:6-7 working days
25+
2,000+$0.0675
- +
Ext. Price(USD):$135.00
MOQ:2,000
Mult:2,000
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.3301
- +
Ext. Price(USD):$2,873.01
MOQ:2,160
Mult:2,160
SPQ:720
Pre-order
2,500,000
Factory Lead Time:15 weeks
5,000+$2.3537
- +
Ext. Price(USD):$11,768.50
MOQ:5,000
Mult:1,000
SPQ:1,000
Molex
ECAD Model:
Conn Shrouded Header HDR 4 POS 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
540,000
Factory Lead Time:22-26 weeks
5,400+$1.8375
12,600+$1.6125
30,600+$1.575
- +
Ext. Price(USD):$9,922.50
MOQ:5,400
Mult:5,400
Wire-to-Board Connector, 3.0mm, Right Angle SMT Tails and Hold Down Header
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$2.2736
- +
Ext. Price(USD):$6,820.80
MOQ:3,000
Mult:3,000
SPQ:600
CONN BOARD TO BOARD CONNECTOR, 0.5mm Pitch SMT Connector
Pre-order
30,000
Factory Lead Time:16-18 weeks
3,000+$1.3026
- +
Ext. Price(USD):$3,907.80
MOQ:3,000
Mult:3,000
1.5mm Pitch Disconnectable Crimp Style Connectors
Available Stock
3,788
Estimated Ship Time:14-17 working days
50+$0.6192
100+$0.5329
4,000+$0.3718
10,000+$0.3706
- +
Ext. Price(USD):$50.15
MOQ:81
Mult:1
SPQ:1
JST
ECAD Model:
Conn Board to Board PL 40 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.9644
36,000+$0.9483
60,000+$0.9242
- +
Ext. Price(USD):$11,572.80
MOQ:12,000
Mult:12,000
SPQ:12,000
Shrouded Header HDR 4 Pos 2mm Solder RA SMD T/R
Available Stock
495
Estimated Ship Time:6-7 working days
20+$2.2156
- +
Ext. Price(USD):$44.31
MOQ:20
Mult:20
JST
ECAD Model:
Conn Ejector Header HDR 50 POS 2.54mm Solder ST Thru-Hole Box
Pre-order
4,500
Factory Lead Time:18-22 weeks
26+
450+$1.2789
1,350+$1.2576
2,250+$1.2257
- +
Ext. Price(USD):$575.50
MOQ:450
Mult:450
SPQ:450
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.4665
- +
Ext. Price(USD):$1,259.55
MOQ:2,700
Mult:900
SPQ:900
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8026
- +
Ext. Price(USD):$1,203.90
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Click Mate PCB Receptacle, 1.50mm Pitch, Single Row, Surface Mount, Right Angle, Tin Plated, Positive Lock, 12 Circuits, Red
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.925
2,000+$0.8125
5,000+$0.8
- +
Ext. Price(USD):$925.00
MOQ:1,000
Mult:1,000
Molex
ECAD Model:
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.1375
- +
Ext. Price(USD):$5,733.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.2538
12,000+$0.24
- +
Ext. Price(USD):$1,522.80
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
Conn Wire to Board HDR 9 POS 2mm Solder ST Top Entry SMD T/R
Pre-order
171,000
Factory Lead Time:22-26 weeks
1,710+$0.4375
4,560+$0.3875
10,260+$0.375
- +
Ext. Price(USD):$748.12
MOQ:1,710
Mult:1,710
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.1817
- +
Ext. Price(USD):$5,645.29
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Shrouded Header, Straight, Through Hole
Available Stock
1,200
Estimated Ship Time:4-6 working days
200+$0.1859
- +
Ext. Price(USD):$37.18
MOQ:200
Mult:200
SPQ:200
Pre-order
40,000
Factory Lead Time:25-42 weeks
400+$2.4467
- +
Ext. Price(USD):$978.68
MOQ:400
Mult:400
SPQ:400
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.7535
- +
Ext. Price(USD):$5,067.22
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.7656
- +
Ext. Price(USD):$7,889.04
MOQ:900
Mult:900
SPQ:300
Pre-order
157,500
Factory Lead Time:15 weeks
315+$9.0946
- +
Ext. Price(USD):$2,864.79
MOQ:315
Mult:315
SPQ:315
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.672
- +
Ext. Price(USD):$806.40
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.2851
- +
Ext. Price(USD):$4,434.88
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header M 6 POS 3.5mm Solder ST Thru-Hole
Available Stock
272
Estimated Ship Time:6-12 working days
10+$1.1516
100+$1.131
500+$1.131
1,000+$1.1105
2,500+$1.1105
- +
Ext. Price(USD):$24.18
MOQ:21
Mult:1
25 / PageGoto