Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$3.175
- +
Ext. Price(USD):$9,525.00
MOQ:3,000
Mult:3,000
SPQ:3,000
WAGO
ECAD Model:
Pre-order
20,000
Factory Lead Time:7-9 weeks
200+$0.5799
800+$0.5716
2,000+$0.5468
- +
Ext. Price(USD):$115.98
MOQ:200
Mult:200
SPQ:200
Wire to Board HDR 4 POS 3mm Solder RA Side Entry TH Tray
Pre-order
922,500
Factory Lead Time:15 weeks
1,845+$0.3621
- +
Ext. Price(USD):$668.07
MOQ:1,845
Mult:1,845
SPQ:1,845
JST
ECAD Model:
Conn Shrouded Header HDR 34 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
20
Estimated Ship Time:3-5 working days
25+
10+$0.6125
20+$0.592
50+$0.5767
- +
Ext. Price(USD):$6.12
MOQ:10
Mult:1
SPQ:20
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.54
- +
Ext. Price(USD):$3,429.00
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.2841
- +
Ext. Price(USD):$3,426.15
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$9.1173
- +
Ext. Price(USD):$12,308.35
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6842
- +
Ext. Price(USD):$821.04
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$0.8844
- +
Ext. Price(USD):$1,114.34
MOQ:1,260
Mult:1,260
SPQ:630
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.2642
- +
Ext. Price(USD):$7,437.78
MOQ:900
Mult:300
SPQ:300
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
300,000
Factory Lead Time:15 weeks
600+$1.4589
- +
Ext. Price(USD):$875.34
MOQ:600
Mult:600
SPQ:300
Wire-to-Board HDR 14 Pos 4.2mm Solder ST Top Entry TH
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$4.8485
- +
Ext. Price(USD):$7,200.02
MOQ:1,485
Mult:1,485
SPQ:495
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7068
- +
Ext. Price(USD):$1,060.20
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Shrouded Header (4 Sides), 10-Pos, 2mm Pitch, Solder, ST Top Entry, Thru-Hole, Tube
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$1.5375
- +
Ext. Price(USD):$9,040.50
MOQ:5,880
Mult:5,880
SPQ:5,880
1mm Pitch Disconnectable Crimp Style Connector
Available Stock
1,943
Estimated Ship Time:14-17 working days
10+$1.7399
50+$1.0494
2,000+$0.73
4,000+$0.7266
- +
Ext. Price(USD):$50.45
MOQ:29
Mult:1
SPQ:1
Board-to-Board Connector HDR 6 Pos 2.2mm Solder Straight Thru-Hole Box
Available Stock
900
Estimated Ship Time:14-17 working days
10+$2.2482
50+$1.5604
1,000+$1.1515
2,000+$1.1481
- +
Ext. Price(USD):$51.70
MOQ:23
Mult:1
SPQ:1
Conn Shrouded Header HDR 34 POS 2mm Solder ST Thru-Hole Box
Available Stock
584
Estimated Ship Time:5-9 working days
22+
5+$0.889
15+$0.6972
30+$0.6854
- +
Ext. Price(USD):$4.44
MOQ:5
Mult:1
SPQ:250
Wire-to-Board HDR 16-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.8872
- +
Ext. Price(USD):$3,566.80
MOQ:1,890
Mult:1,890
SPQ:630
Conn Shrouded Header (4 Sides) HDR 28 POS 1.25mm Solder RA Side Entry SMD T/R
Available Stock
900
Estimated Ship Time:14-17 working days
50+$0.7288
100+$0.6629
2,000+$0.5842
4,000+$0.5842
- +
Ext. Price(USD):$50.28
MOQ:69
Mult:1
SPQ:1
Minitek Reg Pwr 4.2 Hcc Wire To Board Connector Header Dual Row Vertical TH Gold Flash Plating Black 4 Pos LCP Non-Glow Wire Compatible
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.7765
- +
Ext. Price(USD):$2,795.40
MOQ:3,600
Mult:3,600
SPQ:1,200
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.044
36,000+$0.0433
60,000+$0.0422
- +
Ext. Price(USD):$528.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Conn Socket and Terminal Strip SKT/HDR 12 POS 2.54mm Solder ST Thru-Hole Bulk
Pre-order
100
Factory Lead Time:8-10 weeks
50+$2.9435
100+$2.5334
57,580+$0.6973
124,498+$0.637
- +
Ext. Price(USD):$250.19
MOQ:85
Mult:1
SPQ:1
JST
Package:SMD,P=2mm
ECAD Model:
Shrouded Header (4 Sides) HDR 3 POS 2mm ST Top Entry SMD T/R
Available Stock
2,227
Estimated Ship Time:5-9 working days
22+
5+$0.539
15+$0.4173
30+$0.4103
- +
Ext. Price(USD):$2.69
MOQ:5
Mult:1
SPQ:500
Molex
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board Receptacle, Dual Row, SMD, Vertical, 0.10um Gold Plating, 12 Circuits, Black
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.7375
4,050+$1.525
10,350+$1.4875
- +
Ext. Price(USD):$3,127.50
MOQ:1,800
Mult:1,800
JST
ECAD Model:
Unshrouded Header HDR 18 POS 2.5mm Solder RA Thru-Hole Connector
Available Stock
20
Estimated Ship Time:6-7 working days
20+$2.8947
- +
Ext. Price(USD):$57.89
MOQ:20
Mult:20
25 / PageGoto