Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector, Vertical Header, 1.27mm Pitch, 10 Pos, SMD
Pre-order
125,000
Factory Lead Time:23 weeks
250+$1.6138
- +
Ext. Price(USD):$806.90
MOQ:500
Mult:250
SPQ:250
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.3123
- +
Ext. Price(USD):$5,174.76
MOQ:1,200
Mult:1,200
SPQ:400
Conn Board Stacker HDR 40 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Pre-order
100
Factory Lead Time:8-10 weeks
1+$12.329
25+$11.8465
17,000+$2.4972
36,500+$2.28
- +
Ext. Price(USD):$258.90
MOQ:21
Mult:1
SPQ:1
JST
Package:SMD,P=2mm
ECAD Model:
Shrouded Header HDR, 12 POS, 2mm, Solder, ST, SMD, T/R
Available Stock
2,630
Estimated Ship Time:6-7 working days
22+
20+$1.5874
500+$0.5397
- +
Ext. Price(USD):$31.74
MOQ:20
Mult:20
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8112
- +
Ext. Price(USD):$1,095.12
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6964
- +
Ext. Price(USD):$835.68
MOQ:1,200
Mult:1,200
SPQ:400
Shrouded Header, HDR, 24 POS, 2mm Pitch, Solder, ST, Thru-Hole, Box
Available Stock
4,090
Estimated Ship Time:5-9 working days
22+
5+$0.6515
15+$0.5181
30+$0.5094
- +
Ext. Price(USD):$3.25
MOQ:5
Mult:1
SPQ:250
Molex
ECAD Model:
Conn Board to Board RCP 6Power POS 2mm/2.5mm Solder RA Side Entry Thru-Hole EXTreme LPHPower Tray
Pre-order
112,000
Factory Lead Time:22-26 weeks
1,120+$5.6625
- +
Ext. Price(USD):$6,342.00
MOQ:1,120
Mult:1,120
SPQ:1,120
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.719
- +
Ext. Price(USD):$1,294.20
MOQ:1,800
Mult:1,800
SPQ:900
JST
ECAD Model:
Connectors, 2.5mm Pitch, Disconnectable, Crimp Style
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.2227
72,000+$0.2189
120,000+$0.2134
- +
Ext. Price(USD):$5,344.80
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
Conn Wire to Wire HDR 11 POS 1mm IDT ST Cable Mount Box
Available Stock
3,200
Estimated Ship Time:4-6 working days
200+$0.2167
- +
Ext. Price(USD):$43.34
MOQ:200
Mult:200
SPQ:200
JST
ECAD Model:
Ejector Header HDR, 60-Pos, 2.54mm Pitch, Solder RA Thru-Hole, Box
Pre-order
4,500
Factory Lead Time:18-22 weeks
26+
450+$4.139
1,350+$4.0701
2,250+$3.9666
- +
Ext. Price(USD):$1,862.55
MOQ:450
Mult:450
SPQ:450
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1344
- +
Ext. Price(USD):$2,881.44
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6372
- +
Ext. Price(USD):$1,146.96
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8913
- +
Ext. Price(USD):$1,336.95
MOQ:1,500
Mult:500
SPQ:500
multicomp
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 10 POS 3.5mm Solder RA Side Entry Thru-Hole
Available Stock
135
Estimated Ship Time:6-12 working days
10+$1.5763
25+$1.4123
1,000+$1.3619
1,500+$1.3619
- +
Ext. Price(USD):$25.22
MOQ:16
Mult:1
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header, Dual Row, Vertical, SMD, 2.00um Tin Plating, without Peg, with Pick and Place Cap, 36 Circuits, Glow Wire Capable, Tube
Pre-order
546,000
Factory Lead Time:22-26 weeks
5,460+$1.6875
- +
Ext. Price(USD):$9,213.75
MOQ:5,460
Mult:5,460
SPQ:5,460
Molex
ECAD Model:
Conn Wire to Board HDR 14 POS 2.54mm Solder RA Thru-Hole KK® Bag
Pre-order
75,000
Factory Lead Time:22-26 weeks
750+$2.575
1,500+$2.475
2,500+$2.15
5,000+$2
- +
Ext. Price(USD):$1,931.25
MOQ:750
Mult:750
SPQ:750
Conn Unshrouded Header HDR 20 POS 3.96mm Solder ST Thru-Hole Carton
Pre-order
5,000
Factory Lead Time:22-26 weeks
50+$32.4625
100+$29
1,000+$20.85
10,000+$16.8
- +
Ext. Price(USD):$1,623.12
MOQ:50
Mult:50
SPQ:50
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
101
Estimated Ship Time:4-6 working days
26+
1+$1.0626
- +
Ext. Price(USD):$1.06
MOQ:1
Mult:1
SPQ:1
JST
Package:SMD,P=2mm
ECAD Model:
Conn Shrouded Header HDR 5 POS 2mm Solder RA SMD T/R
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.7485
- +
Ext. Price(USD):$14.97
MOQ:20
Mult:20
Minitek microspace Header STS 1.5 Top Latch
Pre-order
4,200
Factory Lead Time:10-16 weeks
24+
420+$0.782
840+$0.7616
- +
Ext. Price(USD):$328.44
MOQ:420
Mult:420
SPQ:420
Conn Unshrouded Header HDR 5 POS 2mm Solder RA Thru-Hole
Available Stock
900
Estimated Ship Time:14-17 working days
100+$0.3137
500+$0.2807
1,000+$0.2718
2,000+$0.2469
4,000+$0.2457
- +
Ext. Price(USD):$50.19
MOQ:160
Mult:1
SPQ:1
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1734
- +
Ext. Price(USD):$1,408.08
MOQ:1,200
Mult:400
SPQ:400
Mini PCI Express Connector, H7.0mm
Available Stock
209
Estimated Ship Time:10-15 working days
1+$1.0336
- +
Ext. Price(USD):$50.64
MOQ:49
Mult:1
SPQ:450
25 / PageGoto