Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
IDC Connector Receptacle, 4-Pos, 2.5mm Pitch, IDT, RA, Cable Mount, Box
Available Stock
9,965
Estimated Ship Time:6-7 working days
22+
20+$0.3377
1,000+$0.1366
- +
Ext. Price(USD):$6.75
MOQ:20
Mult:20
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4927
- +
Ext. Price(USD):$739.05
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Conn Socket Strip RCP 8 POS 2mm Solder ST SMD Milli-Grid™ Tube
Pre-order
670,000
Factory Lead Time:22-26 weeks
6,700+$0.975
- +
Ext. Price(USD):$6,532.50
MOQ:6,700
Mult:6,700
SPQ:6,700
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$3.1667
- +
Ext. Price(USD):$2,850.03
MOQ:900
Mult:900
SPQ:450
CONNECTOR, HEADER, THT, 2MM, 50WAY; Pitch Spacing:2mm; No. of Contacts:50Contacts; Gender:Plug; Product Range:SLY Series; Contact Termination Type:Through Hole; No. of Rows:1Rows; Contact Plating:Gold Plated Contacts; Co
Available Stock
817
Estimated Ship Time:6-12 working days
1+$5.238
10+$4.6094
500+$4.5256
1,000+$4.5256
- +
Ext. Price(USD):$26.19
MOQ:5
Mult:1
Conn Unshrouded Header HDR 12 POS 2.54mm Solder RA Thru-Hole Package
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.6125
1,000+$2.475
2,500+$2.2875
5,000+$2.2
10,000+$2.125
- +
Ext. Price(USD):$1,306.25
MOQ:500
Mult:500
SPQ:500
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6703
- +
Ext. Price(USD):$1,206.54
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Ejector Header HDR 34 POS 2.54mm Solder RA Thru-Hole Box
Available Stock
425
Estimated Ship Time:4-6 working days
25+$1.4639
- +
Ext. Price(USD):$36.59
MOQ:25
Mult:25
SPQ:25
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$3.4625
5,004+$3.225
10,008+$3.0375
- +
Ext. Price(USD):$8,310.00
MOQ:2,400
Mult:2,400
SPQ:2,400
Conn Shrouded Header HDR 10 POS 1.25mm Solder RA Side Entry SMD
Available Stock
1,892
Estimated Ship Time:14-17 working days
50+$0.6275
100+$0.5283
2,000+$0.4497
4,000+$0.4475
- +
Ext. Price(USD):$50.20
MOQ:80
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header HDR 3 POS 2mm Solder RA Thru-Hole Box
Available Stock
17,000
Estimated Ship Time:4-6 working days
1,000+$0.0322
- +
Ext. Price(USD):$32.20
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire to Board Connector 3.0mm Right Angle TH Header
Pre-order
625,000
Factory Lead Time:15 weeks
1,250+$1.8193
- +
Ext. Price(USD):$2,274.12
MOQ:1,250
Mult:1,250
SPQ:1,250
Conn Socket Strip SKT 46 POS 2mm Solder RA Thru-Hole Tube
Pre-order
1,300
Factory Lead Time:22-26 weeks
13+$10.875
104+$7.075
1,001+$5.45
5,005+$4.3625
10,010+$3.8
- +
Ext. Price(USD):$141.37
MOQ:13
Mult:13
SPQ:13
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.4196
- +
Ext. Price(USD):$6,503.52
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.2269
- +
Ext. Price(USD):$8,304.21
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.3973
- +
Ext. Price(USD):$3,595.95
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.0985
- +
Ext. Price(USD):$1,977.30
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.5564
- +
Ext. Price(USD):$2,101.14
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Board-to-Board & Mezzanine Connector
Available Stock
40
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Right Angle TH 0.75um Gold Plating No Peg 3.60mm Tail Length No Tape 28 Circuits Glow Wire Capable Tube
Pre-order
489,600
Factory Lead Time:22-26 weeks
4,896+$2.9
- +
Ext. Price(USD):$14,198.40
MOQ:4,896
Mult:4,896
SPQ:4,896
Molex
ECAD Model:
Wire-to-Board RCP 32 POS 2.54mm Solder RA Thru-Hole EXTreme LPHPower Tray
Pre-order
140,400
Factory Lead Time:22-26 weeks
1,404+$4.1125
4,000+$3.5875
10,000+$3.525
- +
Ext. Price(USD):$5,773.95
MOQ:1,404
Mult:1,404
Pre-order
330,000
Factory Lead Time:15 weeks
660+$9.2635
- +
Ext. Price(USD):$6,113.91
MOQ:660
Mult:660
SPQ:330
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7086
- +
Ext. Price(USD):$1,275.48
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1037
- +
Ext. Price(USD):$1,324.44
MOQ:1,200
Mult:1,200
SPQ:400
Amphenol Wire-to-Board Connector, T821 Series, 12-Pin, 2.54mm Pitch, Straight, TH
Available Stock
3,080
Estimated Ship Time:8-16 working days
270+$0.3209
1,350+$0.2953
2,700+$0.2738
4,860+$0.2603
10,800+$0.2469
- +
Ext. Price(USD):$259.92
MOQ:810
Mult:270
SPQ:270
25 / PageGoto