Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Header and PCB Receptacle Connector
Available Stock
140
Estimated Ship Time:14-17 working days
5+$6.0321
10+$5.1841
100+$3.9369
200+$3.8991
- +
Ext. Price(USD):$54.28
MOQ:9
Mult:1
SPQ:1
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9645
- +
Ext. Price(USD):$1,302.07
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
300,000
Factory Lead Time:6 weeks
600+$1.8436
- +
Ext. Price(USD):$1,106.16
MOQ:600
Mult:300
SPQ:300
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3903
- +
Ext. Price(USD):$3,226.90
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.6901
- +
Ext. Price(USD):$5,628.12
MOQ:1,200
Mult:400
SPQ:400
Pre-order
112,500
Factory Lead Time:22-26 weeks
1,125+$1.175
2,250+$1.0625
5,010+$0.9
10,005+$0.8125
25,005+$0.6625
- +
Ext. Price(USD):$1,321.87
MOQ:1,125
Mult:1,125
SPQ:1,125
Amphenol
Package:SMD,P=2.54mm
ECAD Model:
Pre-order
108,000
Factory Lead Time:10-16 weeks
24+
10,800+$0.4735
11,400+$0.4612
- +
Ext. Price(USD):$5,113.80
MOQ:10,800
Mult:600
SPQ:600
Molex MTA-100 Header Assembly, Friction Lock, Notched, Wire-to-Board
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.5375
1,000+$1.45
2,500+$1.3375
5,000+$1.2875
10,000+$1.2375
- +
Ext. Price(USD):$384.37
MOQ:250
Mult:250
SPQ:250
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.5727
- +
Ext. Price(USD):$1,374.48
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.7079
- +
Ext. Price(USD):$3,074.22
MOQ:1,800
Mult:600
SPQ:600
Wire-to-Board HDR, 24 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH
Pre-order
270,000
Factory Lead Time:15 weeks
540+$1.5355
- +
Ext. Price(USD):$829.17
MOQ:540
Mult:540
SPQ:180
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3573
- +
Ext. Price(USD):$3,182.35
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7277
- +
Ext. Price(USD):$1,091.55
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Pre-order
324,000
Factory Lead Time:22-26 weeks
3,240+$0.525
8,000+$0.4625
20,000+$0.45
- +
Ext. Price(USD):$1,701.00
MOQ:3,240
Mult:3,240
Molex
ECAD Model:
Pre-order
320,000
Factory Lead Time:22-26 weeks
3,200+$0.6125
6,400+$0.575
- +
Ext. Price(USD):$1,960.00
MOQ:3,200
Mult:3,200
SPQ:3,200
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7635
- +
Ext. Price(USD):$1,587.15
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2831
- +
Ext. Price(USD):$1,154.79
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector HDR 22 Pos 4.2mm Solder Straight Top Entry TH Tray
Pre-order
472,500
Factory Lead Time:15 weeks
945+$8.9031
- +
Ext. Price(USD):$8,413.42
MOQ:945
Mult:945
SPQ:315
Molex
ECAD Model:
Shrouded Header M 32 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
525,000
Factory Lead Time:22-26 weeks
5,250+$2.225
- +
Ext. Price(USD):$11,681.25
MOQ:5,250
Mult:5,250
SPQ:5,250
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5327
- +
Ext. Price(USD):$958.86
MOQ:1,800
Mult:1,800
SPQ:600
multicomp
ECAD Model:
Conn IDC Connector PL 10 POS 2.54mm IDT RA Thru-Hole
Available Stock
228
Estimated Ship Time:6-12 working days
10+$0.5905
50+$0.5905
100+$0.5669
200+$0.5669
- +
Ext. Price(USD):$24.21
MOQ:41
Mult:1
Molex
ECAD Model:
Shrouded Header Connector, HDR 10 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Pre-order
216,000
Factory Lead Time:22-26 weeks
2,160+$1.1
4,320+$1.05
- +
Ext. Price(USD):$2,376.00
MOQ:2,160
Mult:2,160
SPQ:2,160
Molex
ECAD Model:
Conn Board Stacker HDR 8 POS 2mm Solder ST Top Entry Thru-Hole Tray
Pre-order
81,000
Factory Lead Time:22-26 weeks
810+$0.625
1,620+$0.525
3,240+$0.475
5,000+$0.4375
- +
Ext. Price(USD):$506.25
MOQ:810
Mult:810
SPQ:810
Molex
ECAD Model:
PCB Header 2.00mm Pitch Milli Grid Dual Row Right Angle TH 0.75μm Gold Au Plating No Peg 4.60mm Tail Length No Tape 28 Circuits Glow Wire Capable Tube
Pre-order
489,600
Factory Lead Time:22-26 weeks
4,896+$2.9
- +
Ext. Price(USD):$14,198.40
MOQ:4,896
Mult:4,896
SPQ:4,896
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4874
- +
Ext. Price(USD):$731.10
MOQ:1,500
Mult:1,500
SPQ:500
25 / PageGoto