Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry TH
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$0.4892
- +
Ext. Price(USD):$1,232.78
MOQ:2,520
Mult:2,520
SPQ:840
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7218
- +
Ext. Price(USD):$1,549.62
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.539
- +
Ext. Price(USD):$1,385.10
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.2657
- +
Ext. Price(USD):$1,708.69
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3081
- +
Ext. Price(USD):$924.30
MOQ:3,000
Mult:1,500
SPQ:500
JST
ECAD Model:
Board-in Insulation Displacement Connector
Pre-order
240,000
Factory Lead Time:16-18 weeks
24,000+$0.1389
- +
Ext. Price(USD):$3,333.60
MOQ:24,000
Mult:24,000
CT P/HDR ASSY V 11P W/KINK YEL
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$1.15
10,000+$1.025
25,000+$0.8375
50,000+$0.8125
100,000+$0.7875
- +
Ext. Price(USD):$9,200.00
MOQ:8,000
Mult:8,000
SPQ:8,000
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.5017
- +
Ext. Price(USD):$10,127.29
MOQ:1,350
Mult:1,350
SPQ:450
Conn Fine Pitch Connector PL 60 POS 0.8mm Solder ST Top Entry SMD Bergstak® T/R
Pre-order
700,000
Factory Lead Time:7 weeks
1,400+$1.7027
- +
Ext. Price(USD):$2,383.78
MOQ:1,400
Mult:700
SPQ:700
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8635
- +
Ext. Price(USD):$1,295.25
MOQ:1,500
Mult:500
SPQ:500
Pre-order
198,000
Factory Lead Time:22-26 weeks
1,980+$4.05
5,005+$3.7875
10,010+$3.5625
- +
Ext. Price(USD):$8,019.00
MOQ:1,980
Mult:1,980
SPQ:1,980
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 22 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$1.9
- +
Ext. Price(USD):$11,172.00
MOQ:5,880
Mult:5,880
SPQ:5,880
Molex
ECAD Model:
Board to Board HDR 90 Pos 0.4mm Solder ST SMD SlimStack T/R
Available Stock
50
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
CT P/HDR BOX V 13P T/P NAT W/O
Pre-order
225,000
Factory Lead Time:22-26 weeks
2,250+$0.825
5,010+$0.7125
500,010+$0.3875
750,000+$0.3638
- +
Ext. Price(USD):$1,856.25
MOQ:2,250
Mult:2,250
Molex
ECAD Model:
Conn Wire to Board HDR 10 POS 1.25mm Solder ST Top Entry SMD T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.025
8,000+$0.8875
20,000+$0.875
- +
Ext. Price(USD):$3,075.00
MOQ:3,000
Mult:3,000
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.773
- +
Ext. Price(USD):$927.60
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8026
- +
Ext. Price(USD):$1,203.90
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Conn Board to Board RCP 12 POS 2mm Solder RA Thru-Hole Box
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.4521
- +
Ext. Price(USD):$9.04
MOQ:20
Mult:20
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7086
- +
Ext. Price(USD):$1,275.48
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Unshrouded Header HDR 7 POS 2.5mm Solder RA Side Entry Thru-Hole Reel
Available Stock
412
Estimated Ship Time:4-6 working days
23+
1+$0.1565
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.8611
- +
Ext. Price(USD):$2,791.65
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.4091
- +
Ext. Price(USD):$981.84
MOQ:2,400
Mult:2,400
SPQ:1,200
JST
ECAD Model:
Conn Shrouded Header HDR 11 POS 2mm Solder RA Thru-Hole Box
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.1294
13,500+$0.1272
22,500+$0.124
- +
Ext. Price(USD):$582.30
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$2.3433
- +
Ext. Price(USD):$6,326.91
MOQ:2,700
Mult:900
SPQ:900
JST 2.0mm Pitch 16P Dual Row Header Wire-to-Board Connector PUD Series Right Angle Surface Mount
Available Stock
1,868
Estimated Ship Time:14-17 working days
50+$0.9097
100+$0.7633
2,000+$0.6113
4,000+$0.6102
- +
Ext. Price(USD):$50.03
MOQ:55
Mult:1
SPQ:1
25 / PageGoto