Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 34 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$2.0875
- +
Ext. Price(USD):$10,521.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH, 0.38um Gold Au Plating, No Peg, 4.60mm PC Tail Length, Pick and Place Cap, 26 Circuits, Glow Wire Capable, Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$2.4875
- +
Ext. Price(USD):$12,537.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Molex
ECAD Model:
Conn Unshrouded Header HDR 3 POS 2.54mm Solder RA
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.575
8,000+$0.5
20,000+$0.4875
- +
Ext. Price(USD):$1,725.00
MOQ:3,000
Mult:3,000
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.2067
- +
Ext. Price(USD):$11,079.04
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Vertical TH 30 Gold Plating 4 Pos Non Glow Wire Compatible Black
Pre-order
900,000
Factory Lead Time:11 weeks
1,800+$0.6685
- +
Ext. Price(USD):$1,203.30
MOQ:1,800
Mult:1,800
SPQ:1,800
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.437
- +
Ext. Price(USD):$1,048.80
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR 18 Pos 4.2mm Solder RA Side Entry TH Tray
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2657
- +
Ext. Price(USD):$1,139.13
MOQ:900
Mult:300
SPQ:300
Wire-to-Board Connector HDR 4 Pos 2mm Solder Right Angle Thru-Hole Automotive Tube
Available Stock
438
Estimated Ship Time:5-7 working days
20+
38+$6.4183
76+$6.3079
114+$6.1973
228+$6.0624
- +
Ext. Price(USD):$243.89
MOQ:38
Mult:38
SPQ:38
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.337
- +
Ext. Price(USD):$3,850.56
MOQ:2,880
Mult:2,880
SPQ:2,880
Molex
ECAD Model:
Wire to Board HDR 3 Pos 3.96mm Solder RA Side Entry TH MV-396 Bag
Available Stock
64
Estimated Ship Time:3-5 working days
10+
10+$0.2173
50+$0.2135
100+$0.206
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Conn Unshrouded Header HDR 17 POS 2.5mm Solder ST Thru-Hole Reel
Pre-order
36,000
Factory Lead Time:18-22 weeks
26+
3,600+$0.4612
10,800+$0.4535
18,000+$0.442
- +
Ext. Price(USD):$1,660.32
MOQ:3,600
Mult:3,600
SPQ:3,600
Conn Shrouded Header HDR 12 POS 1mm Solder RA SMD T/R
Available Stock
20
Estimated Ship Time:6-7 working days
20+$2.005
- +
Ext. Price(USD):$40.10
MOQ:20
Mult:20
Conn Unshrouded Header HDR 18 POS 2.54mm Solder ST Thru-Hole Automotive
Pre-order
1,200,000
Factory Lead Time:25-42 weeks
12,000+$2.2681
- +
Ext. Price(USD):$27,217.20
MOQ:12,000
Mult:100
SPQ:100
Molex
ECAD Model:
Shrouded Header (4 Sides), HDR 4 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Pre-order
202,500
Factory Lead Time:22-26 weeks
2,025+$0.925
4,050+$0.875
- +
Ext. Price(USD):$1,873.12
MOQ:2,025
Mult:2,025
SPQ:2,025
CONNECTOR, RCPT, 50POS, 2.54MM; Pitch Spacing:2.54mm; No. of Contacts:50Contacts; Gender:Receptacle; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Contac
Available Stock
3,225
Estimated Ship Time:6-12 working days
1+$1.2974
50+$1.1624
100+$1.1624
200+$1.1624
- +
Ext. Price(USD):$24.65
MOQ:19
Mult:1
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 1mm Solder RA Thru-Hole Box
Pre-order
118,800
Factory Lead Time:18-22 weeks
26+
11,880+$0.1666
35,640+$0.1638
59,400+$0.1596
- +
Ext. Price(USD):$1,979.20
MOQ:11,880
Mult:11,880
SPQ:11,880
Molex
ECAD Model:
Pre-order
225,000
Factory Lead Time:22-26 weeks
2,250+$0.1563
9,000+$0.1488
- +
Ext. Price(USD):$351.67
MOQ:2,250
Mult:2,250
SPQ:2,250
JST
ECAD Model:
Shrouded Header, HDR, 10 Pos, 5.08mm Pitch, Solder, ST, Thru-Hole, Box
Available Stock
1,344
Estimated Ship Time:4-6 working days
84+$2.539
- +
Ext. Price(USD):$213.27
MOQ:84
Mult:84
SPQ:84
Molex
ECAD Model:
Pre-order
11,300
Factory Lead Time:22-26 weeks
113+$0.9625
450+$0.9375
1,000+$0.925
- +
Ext. Price(USD):$108.76
MOQ:113
Mult:113
SPQ:113
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Gold Flash Plating Black 10 Pos Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.2831
- +
Ext. Price(USD):$7,698.60
MOQ:6,000
Mult:6,000
SPQ:1,000
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.337
- +
Ext. Price(USD):$1,203.30
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1849
- +
Ext. Price(USD):$2,949.61
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6233
- +
Ext. Price(USD):$1,121.94
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1298
- +
Ext. Price(USD):$1,355.76
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Disconnectable Crimp Style Connector
Available Stock
192
Estimated Ship Time:6-7 working days
20+$1.4342
- +
Ext. Price(USD):$28.68
MOQ:20
Mult:20
25 / PageGoto