Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Available Stock
45
Estimated Ship Time:7-12 working days
10+$18.3865
25+$16.5083
- +
Ext. Price(USD):$257.41
MOQ:14
Mult:1
SPQ:1
Molex
ECAD Model:
Board-to-Board Connector, SMT Dual Receptacle, 80-Pin, Vertical Stacking
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0011
- +
Ext. Price(USD):$1,351.48
MOQ:1,350
Mult:1,350
SPQ:450
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.0411
- +
Ext. Price(USD):$5,309.61
MOQ:5,100
Mult:5,100
SPQ:1,700
JST
ECAD Model:
Unshrouded Header, HDR 6 POS 2.54mm Solder ST Thru-Hole
Available Stock
700
Estimated Ship Time:14-17 working days
50+$0.748
100+$0.6631
4,000+$0.4769
10,000+$0.4757
- +
Ext. Price(USD):$50.11
MOQ:67
Mult:1
SPQ:1
Wire-to-Board HDR, 22 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
360,000
Factory Lead Time:15 weeks
720+$7.9665
- +
Ext. Price(USD):$5,735.88
MOQ:720
Mult:720
SPQ:240
Conn Board to Board RCP 12 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
96
Estimated Ship Time:6-7 working days
20+$0.5104
- +
Ext. Price(USD):$10.20
MOQ:20
Mult:20
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2169
- +
Ext. Price(USD):$1,095.21
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Connector Shrouded Header (4 Sides) HDR 7 POS 2mm Solder ST Thru-Hole Box
Pre-order
43,200
Factory Lead Time:18-22 weeks
26+
4,320+$0.2019
12,960+$0.1986
21,600+$0.1935
- +
Ext. Price(USD):$872.20
MOQ:4,320
Mult:4,320
SPQ:4,320
Pre-order
76,000
Factory Lead Time:22-26 weeks
760+$3.475
1,140+$3.2875
5,320+$3.075
10,260+$2.8875
- +
Ext. Price(USD):$2,641.00
MOQ:760
Mult:760
SPQ:760
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.358
- +
Ext. Price(USD):$1,222.20
MOQ:900
Mult:300
SPQ:300
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 7 POS 2mm Solder RA Thru-Hole Tube
Pre-order
495,000
Factory Lead Time:22-26 weeks
4,950+$1.7875
- +
Ext. Price(USD):$8,848.12
MOQ:4,950
Mult:4,950
SPQ:4,950
Minitek Reg Pwr 5.7 Wire-to-Board Connector Right Angle TH Header Dual Row Black 4 Pos Tin Plating Glow Wire Compatible T/R
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.3475
- +
Ext. Price(USD):$8,085.00
MOQ:6,000
Mult:6,000
SPQ:400
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.682
- +
Ext. Price(USD):$7,813.80
MOQ:900
Mult:450
SPQ:450
JST
ECAD Model:
CONN Wire-to-Wire Connector RCP 2POS 2mm IDT TH
Available Stock
12,500
Estimated Ship Time:4-6 working days
22+
500+$0.0488
- +
Ext. Price(USD):$24.40
MOQ:500
Mult:500
SPQ:500
Unshrouded Header, 9 Pos, 2.54mm, Solder, ST Top Entry, TH
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$3.375
2,500+$3.275
10,000+$3.15
- +
Ext. Price(USD):$6,750.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.3673
- +
Ext. Price(USD):$881.52
MOQ:2,400
Mult:600
SPQ:600
Conn Socket Strip SKT 24 POS 2.54mm Solder RA Side Entry Thru-Hole Box/Tube
Pre-order
72,000
Factory Lead Time:22-26 weeks
720+$3.0375
1,440+$2.8625
5,000+$2.025
10,000+$1.925
25,000+$1.825
- +
Ext. Price(USD):$2,187.00
MOQ:720
Mult:720
SPQ:720
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1212
- +
Ext. Price(USD):$2,018.16
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
1,417,500
Factory Lead Time:15 weeks
2,835+$0.8165
- +
Ext. Price(USD):$2,314.77
MOQ:2,835
Mult:2,835
SPQ:945
JST
ECAD Model:
Conn Shrouded Header HDR 3 POS 2mm Solder ST SMD T/R
Pre-order
80,000
Factory Lead Time:18-22 weeks
26+
8,000+$0.1817
24,000+$0.1787
40,000+$0.1742
- +
Ext. Price(USD):$1,453.60
MOQ:8,000
Mult:8,000
SPQ:8,000
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.2448
- +
Ext. Price(USD):$1,680.48
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$2.75
1,500+$2.6125
5,000+$2.4375
10,000+$2.2875
- +
Ext. Price(USD):$2,750.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Shrouded Header HDR 2 POS 2mm Solder RA SMD T/R
Available Stock
4,000
Estimated Ship Time:4-6 working days
800+$0.178
- +
Ext. Price(USD):$142.40
MOQ:800
Mult:800
SPQ:800
Conn Unshrouded Header HDR 20 POS 1.27mm Solder ST Top Entry Thru-Hole Minitek127 Tube
Pre-order
920,000
Factory Lead Time:8 weeks
1,840+$0.6006
- +
Ext. Price(USD):$1,105.10
MOQ:1,840
Mult:1,840
SPQ:1,840
25 / PageGoto