Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Board to Board RCP 60 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
139
Estimated Ship Time:3-5 working days
08+
10+$0.4781
100+$0.47
500+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Shrouded Header HDR 12 POS 5.08mm Solder ST Thru-Hole Box
Pre-order
7,200
Factory Lead Time:18-22 weeks
26+
720+$1.4809
2,160+$1.4562
3,600+$1.4191
- +
Ext. Price(USD):$1,066.24
MOQ:720
Mult:720
SPQ:720
Conn Shrouded Header HDR 2 POS 2mm Solder ST Thru-Hole Box
Available Stock
990
Estimated Ship Time:6-7 working days
20+$0.158
- +
Ext. Price(USD):$3.16
MOQ:20
Mult:20
CamdenBoss
ECAD Model:
Wire-to-Board Connector Header 3 Pos 3.81mm Solder Straight Top Entry Thru-Hole
Available Stock
165
Estimated Ship Time:6-12 working days
10+$1.086
100+$0.9955
500+$0.9955
- +
Ext. Price(USD):$24.97
MOQ:23
Mult:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.688
- +
Ext. Price(USD):$4,032.00
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0463
- +
Ext. Price(USD):$1,255.56
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.9105
- +
Ext. Price(USD):$7,375.05
MOQ:8,100
Mult:8,100
SPQ:2,700
Wire-to-Board HDR 18 Pos 4.2mm Solder Right Angle Side Entry Thru-Hole
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.1665
- +
Ext. Price(USD):$839.88
MOQ:720
Mult:720
SPQ:240
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.5076
- +
Ext. Price(USD):$2,261.40
MOQ:1,500
Mult:1,500
SPQ:500
High Power DIP Header Connector
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$1.6782
- +
Ext. Price(USD):$13,593.42
MOQ:8,100
Mult:8,100
SPQ:2,700
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.1055
- +
Ext. Price(USD):$5,494.95
MOQ:900
Mult:300
SPQ:300
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$0.9854
- +
Ext. Price(USD):$1,507.66
MOQ:1,530
Mult:1,530
SPQ:765
Pre-order
2,500,000
Factory Lead Time:11 weeks
5,000+$0.3273
- +
Ext. Price(USD):$1,636.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Conn Shrouded Header HDR 4 POS 2mm Solder ST Thru-Hole Box
Available Stock
8,000
Estimated Ship Time:6-7 working days
22+
500+$0.1186
- +
Ext. Price(USD):$59.30
MOQ:500
Mult:500
JST
ECAD Model:
Conn Wire to Board HDR 24 POS 2.5mm ST Panel Mount Box
Available Stock
64
Estimated Ship Time:14-17 working days
5+$7.5679
10+$6.7075
100+$5.0661
200+$5.0298
- +
Ext. Price(USD):$52.97
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
2.00mm Pitch, Igrid PCB Header, Dual Row, Right Angle, TH, 0.10um Gold Au Plating, Positive Lock, 30 Circuits, Tray, 3.20mm Pc Tail Length, Black
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$2.275
2,000+$2
5,000+$1.95
- +
Ext. Price(USD):$2,275.00
MOQ:1,000
Mult:1,000
Conn Board Stacker HDR 100 POS 2.54mm Solder ST Thru-Hole Box
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$18.3125
1,000+$17.175
2,500+$16.5875
10,000+$16.0375
- +
Ext. Price(USD):$10,987.50
MOQ:600
Mult:600
SPQ:600
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.9574
- +
Ext. Price(USD):$8,042.49
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Right Angle TH 0.75μm Gold Au Plating No Peg 4.60mm PC Tail Length No Pick & Place Tape 30 Circuits Glow Wire Capable Tube
Pre-order
576,000
Factory Lead Time:22-26 weeks
5,760+$3.0625
- +
Ext. Price(USD):$17,640.00
MOQ:5,760
Mult:5,760
SPQ:5,760
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9028
- +
Ext. Price(USD):$2,568.78
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.9541
- +
Ext. Price(USD):$7,728.21
MOQ:8,100
Mult:8,100
SPQ:2,700
Molex
ECAD Model:
1.25mm Pitch Micro Lock Plus PCB Header Right Angle SMD 0.38um Gold Plating 13 Circuits Tape And Reel Black
Pre-order
480,000
Factory Lead Time:22-26 weeks
4,800+$1.55
12,000+$1.3625
30,000+$1.3375
- +
Ext. Price(USD):$7,440.00
MOQ:4,800
Mult:4,800
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.7656
- +
Ext. Price(USD):$7,889.04
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.2819
- +
Ext. Price(USD):$7,130.56
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6006
- +
Ext. Price(USD):$720.72
MOQ:1,200
Mult:1,200
SPQ:400
25 / PageGoto