Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Unshrouded Header HDR 70 POS 2.54mm Solder ST Thru-Hole C-Grid III™ Tray
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$4.725
- +
Ext. Price(USD):$14,175.00
MOQ:3,000
Mult:3,000
SPQ:3,000
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$2.0543
- +
Ext. Price(USD):$2,588.41
MOQ:1,260
Mult:1,260
SPQ:420
JST
ECAD Model:
HCM Connector
Pre-order
24,000
Factory Lead Time:18-22 weeks
26+
2,400+$0.3843
7,200+$0.378
12,000+$0.3683
- +
Ext. Price(USD):$922.32
MOQ:2,400
Mult:2,400
SPQ:2,400
CONNECTOR, HEADER, 3POS, 1ROW, 5MM; Connector Systems:Board-to-Board; Pitch Spacing:5mm; No. of Rows:1Rows; No. of Contacts:3Contacts; Contact Termination Type:Through Hole Straight; Product Range:-; 72Y6676
Available Stock
908
Estimated Ship Time:6-12 working days
25+$0.8585
50+$0.8241
1,000+$0.7417
2,500+$0.7417
- +
Ext. Price(USD):$24.03
MOQ:28
Mult:1
Molex
ECAD Model:
Board to Board Connector, 40 Pos, 0.4mm Pitch, Solder, Straight, SMD, T/R
Available Stock
86
Estimated Ship Time:3-5 working days
11+
10+$0.4346
50+$0.4273
100+$0.4122
- +
Ext. Price(USD):$4.34
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.282
- +
Ext. Price(USD):$846.00
MOQ:3,000
Mult:1,500
SPQ:500
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$4.625
500+$4.3875
1,000+$3.825
2,500+$3.5625
5,000+$3.4
- +
Ext. Price(USD):$1,156.25
MOQ:250
Mult:250
SPQ:250
Molex
ECAD Model:
Pre-order
1,500,000
Factory Lead Time:22-26 weeks
15,000+$0.15
30,000+$0.1413
- +
Ext. Price(USD):$2,250.00
MOQ:15,000
Mult:15,000
SPQ:15,000
PL 160 POS 0.8mm Solder ST SMD 160 Terminal 1 Port Tray
Pre-order
600
Factory Lead Time:22-26 weeks
6+$38.675
11+$32.525
22+$27.3375
1,000+$25.8875
5,000+$24.45
- +
Ext. Price(USD):$232.05
MOQ:6
Mult:6
SPQ:6
Conn Shrouded Header HDR 40 POS 1.27mm Solder RA Side Entry SMD Reel
Available Stock
530
Estimated Ship Time:5-7 working days
2+$15.8949
- +
Ext. Price(USD):$31.78
MOQ:2
Mult:1
2.5mm Signal D/L, 5mm Pitch, 2P Header Assy
Pre-order
4,800,000
Factory Lead Time:25-42 weeks
48,000+$0.2358
- +
Ext. Price(USD):$11,318.40
MOQ:48,000
Mult:1,600
SPQ:1,600
Connectors, 2.5mm Pitch, Disconnectable, Crimp Style
Available Stock
500
Estimated Ship Time:6-7 working days
20+$8.7084
- +
Ext. Price(USD):$174.16
MOQ:20
Mult:20
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 0.38μm Gold Au Plating w/o Peg 4.60mm PC Tail Length w/o Pick and Place Cap 40 Circuits Glow Wire Capable Tube
Pre-order
432,000
Factory Lead Time:22-26 weeks
4,320+$3.275
- +
Ext. Price(USD):$14,148.00
MOQ:4,320
Mult:4,320
SPQ:4,320
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2779
- +
Ext. Price(USD):$1,150.11
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,125,000
Factory Lead Time:15 weeks
2,250+$0.705
- +
Ext. Price(USD):$1,586.25
MOQ:2,250
Mult:2,250
SPQ:1,125
Molex
ECAD Model:
Conn Wire to Board HDR 16 POS 2.5mm/3mm Solder RA Thru-Hole Bag
Available Stock
13
Estimated Ship Time:3-5 working days
05+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Conn Wire to Board RCP 3 POS 5mm Solder ST Top Entry Thru-Hole Box
Pre-order
45,000
Factory Lead Time:22-26 weeks
450+$0.725
900+$0.6125
1,800+$0.5125
5,000+$0.4375
10,000+$0.4125
- +
Ext. Price(USD):$326.25
MOQ:450
Mult:450
SPQ:450
Conn Board to Board PL 50 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
150,000
Factory Lead Time:18-22 weeks
26+
15,000+$1.6804
45,000+$1.6525
75,000+$1.6104
- +
Ext. Price(USD):$25,206.00
MOQ:15,000
Mult:15,000
SPQ:15,000
Wire-to-Board Connector, Header, 6 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH, Tray
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$1.9203
- +
Ext. Price(USD):$4,839.15
MOQ:2,520
Mult:2,520
SPQ:840
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1082
- +
Ext. Price(USD):$2,846.07
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
165,000
Factory Lead Time:22-26 weeks
1,650+$0.85
3,300+$0.8
- +
Ext. Price(USD):$1,402.50
MOQ:1,650
Mult:1,650
SPQ:1,650
Wire-to-Board HDR 5 POS 4mm Solder ST Top Entry TH Box
Available Stock
2,499
Estimated Ship Time:5-9 working days
22+
10+$0.3057
50+$0.2293
150+$0.2255
- +
Ext. Price(USD):$3.05
MOQ:10
Mult:5
SPQ:200
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7399
- +
Ext. Price(USD):$1,109.85
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.4223
- +
Ext. Price(USD):$2,560.14
MOQ:1,800
Mult:1,800
SPQ:600
Minitek PWR 4.2 Wire-to-Board Connector, Dual Row Header
Pre-order
1,012,500
Factory Lead Time:15 weeks
2,025+$0.9766
- +
Ext. Price(USD):$1,977.61
MOQ:2,025
Mult:2,025
SPQ:675
25 / PageGoto