Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
multicomp
ECAD Model:
Unshrouded Header, 20-Pos, 2.54mm, Solder RA Side Entry Thru-Hole
Available Stock
2,168
Estimated Ship Time:6-12 working days
50+$0.4729
100+$0.454
200+$0.454
- +
Ext. Price(USD):$24.11
MOQ:51
Mult:1
Molex
Package:SMD,P=1.5mm,Horizontal SMD
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board Receptacle Dual Row SMD Right Angle 0.38μm Gold Plated 24 Circuits Black
Pre-order
165,000
Factory Lead Time:22-26 weeks
1,650+$3.6125
4,400+$3.1625
10,450+$3.1
- +
Ext. Price(USD):$5,960.62
MOQ:1,650
Mult:1,650
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.8339
- +
Ext. Price(USD):$750.51
MOQ:900
Mult:900
SPQ:300
Connector Headers and PCB Receptacles, 1.27mm Pitch
Pre-order
4,500
Factory Lead Time:16-18 weeks
450+$2.2437
- +
Ext. Price(USD):$1,009.66
MOQ:450
Mult:450
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$26.2625
1,000+$22.2
500,000+$13
1,000,000+$12.45
- +
Ext. Price(USD):$13,131.25
MOQ:500
Mult:500
JST
ECAD Model:
Wire-to-Board Connector HDR 2POS 2mm SMD
Pre-order
144,000
Factory Lead Time:18-22 weeks
26+
14,400+$0.0952
43,200+$0.0936
72,000+$0.0912
- +
Ext. Price(USD):$1,370.88
MOQ:14,400
Mult:14,400
SPQ:14,400
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Right Angle TH 0.38um Gold Plating No Peg 4.60mm Tail Length No Tape 28 Circuits Glow Wire Capable Tube
Pre-order
489,600
Factory Lead Time:22-26 weeks
4,896+$2.1875
- +
Ext. Price(USD):$10,710.00
MOQ:4,896
Mult:4,896
SPQ:4,896
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 7 POS 2mm Solder RA Thru-Hole Tube
Pre-order
495,000
Factory Lead Time:22-26 weeks
4,950+$1.4
- +
Ext. Price(USD):$6,930.00
MOQ:4,950
Mult:4,950
SPQ:4,950
JST
ECAD Model:
Shrouded Header, HDR, 4 POS, 4mm Pitch, Solder, ST, Top Entry, Thru-Hole, Box
Available Stock
2,000
Estimated Ship Time:4-6 working days
22+
200+$0.1725
- +
Ext. Price(USD):$34.50
MOQ:200
Mult:200
SPQ:200
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
1,147,500
Factory Lead Time:15 weeks
2,295+$3.0762
- +
Ext. Price(USD):$7,059.87
MOQ:2,295
Mult:2,295
SPQ:765
Wire-to-Board Connector Header, 4 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH, Tray
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.4788
- +
Ext. Price(USD):$861.84
MOQ:1,800
Mult:1,800
SPQ:1,800
SEAR - Samtec 1.27mm SEARAY High-Speed High-Density Riser 85 Ohm
Pre-order
100
Factory Lead Time:8-10 weeks
1+$83.1182
10+$79.9334
1,372+$29.2735
2,968+$26.7474
- +
Ext. Price(USD):$332.47
MOQ:4
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header HDR 3 POS 1.5mm Solder RA Side Entry SMD CLIK-Mate T/R
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$1.5375
12,000+$1.3375
30,000+$1.3125
- +
Ext. Price(USD):$9,225.00
MOQ:6,000
Mult:6,000
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3213
- +
Ext. Price(USD):$1,189.17
MOQ:900
Mult:900
SPQ:300
Pre-order
2,000
Factory Lead Time:10-16 weeks
24+
200+$1.0646
400+$1.0368
- +
Ext. Price(USD):$212.92
MOQ:200
Mult:200
SPQ:200
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.3538
12,000+$0.335
- +
Ext. Price(USD):$2,122.80
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.82
- +
Ext. Price(USD):$1,107.00
MOQ:1,350
Mult:450
SPQ:450
JST
ECAD Model:
Conn Board to Board PL 50 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
150,000
Factory Lead Time:16-18 weeks
15,000+$1.2058
- +
Ext. Price(USD):$18,087.00
MOQ:15,000
Mult:15,000
JST
ECAD Model:
Conn Unshrouded Header HDR 10 POS 2.5mm Solder RA Side Entry Thru-Hole Reel
Available Stock
1,100
Estimated Ship Time:14-17 working days
100+$0.3946
300+$0.337
4,000+$0.2656
5,000+$0.2656
- +
Ext. Price(USD):$50.11
MOQ:127
Mult:1
SPQ:1
Wire-to-Board HDR, 4 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, Tray
Pre-order
2,767,500
Factory Lead Time:15 weeks
5,535+$0.4805
- +
Ext. Price(USD):$2,659.56
MOQ:5,535
Mult:5,535
SPQ:1,845
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5818
- +
Ext. Price(USD):$3,485.43
MOQ:1,350
Mult:1,350
SPQ:450
Minitek PWR 3.0 Wire-to-Board Connector, Header, Dual Row
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.7068
- +
Ext. Price(USD):$2,385.45
MOQ:3,375
Mult:3,375
SPQ:1,125
Available Stock
33
Estimated Ship Time:7-12 working days
1+$31.9293
- +
Ext. Price(USD):$255.43
MOQ:8
Mult:1
SPQ:1
Disconnectable Crimp Style Connectors, 2.5mm Pitch
Available Stock
150
Estimated Ship Time:14-17 working days
100+$0.485
300+$0.3962
4,000+$0.3416
5,000+$0.3416
- +
Ext. Price(USD):$50.44
MOQ:104
Mult:1
SPQ:1
JST
ECAD Model:
Board to Board Connector, 50 POS, 0.5mm Pitch, Solder RA Side Entry, SMD T/R
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$2.2765
27,000+$2.2385
45,000+$2.1816
- +
Ext. Price(USD):$20,488.50
MOQ:9,000
Mult:9,000
SPQ:9,000
25 / PageGoto