Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Shrouded Header (4 Sides) HDR 8 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
138
Estimated Ship Time:6-12 working days
10+$1.1872
100+$1.166
500+$1.166
1,000+$1.1448
2,500+$1.1448
- +
Ext. Price(USD):$24.93
MOQ:21
Mult:1
JST
ECAD Model:
Disconnectable Insulation Displacement Connectors for CK Connector
Available Stock
1,944
Estimated Ship Time:6-7 working days
21+
20+$0.2945
1,000+$0.119
- +
Ext. Price(USD):$5.89
MOQ:20
Mult:20
PIN HEADER, 72POS, 2ROW, 2.54MM, THT;
Available Stock
18
Estimated Ship Time:6-12 working days
1+$14.1775
10+$13.9244
250+$13.6712
500+$13.6712
- +
Ext. Price(USD):$28.35
MOQ:2
Mult:1
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry TH
Pre-order
1,035,000
Factory Lead Time:15 weeks
2,070+$0.5188
- +
Ext. Price(USD):$1,073.91
MOQ:2,070
Mult:2,070
SPQ:690
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.7695
- +
Ext. Price(USD):$2,077.65
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board Connector HDR, 28 Pos, 2.54mm, Solder, Right Angle, Thru-Hole
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$3.9
10,000+$3.7625
25,000+$3.15
- +
Ext. Price(USD):$19,500.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Pre-order
140,000
Factory Lead Time:22-26 weeks
1,400+$2.25
2,100+$2.15
5,600+$2
10,500+$1.8875
- +
Ext. Price(USD):$3,150.00
MOQ:1,400
Mult:1,400
SPQ:1,400
9POS Header Assembly for GIC 2.0 EV
Pre-order
160,000
Factory Lead Time:22-26 weeks
1,600+$0.675
3,200+$0.6125
5,000+$0.575
10,000+$0.525
25,000+$0.5125
- +
Ext. Price(USD):$1,080.00
MOQ:1,600
Mult:1,600
SPQ:1,600
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
576,000
Factory Lead Time:22-26 weeks
5,760+$1.0625
- +
Ext. Price(USD):$6,120.00
MOQ:5,760
Mult:5,760
SPQ:5,760
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.8687
- +
Ext. Price(USD):$7,922.74
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.3757
- +
Ext. Price(USD):$4,557.19
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Board to Board RCP 10 POS 2.5mm
Pre-order
48,000
Factory Lead Time:18-22 weeks
26+
4,800+$0.1635
14,400+$0.1608
24,000+$0.1567
- +
Ext. Price(USD):$784.80
MOQ:4,800
Mult:4,800
SPQ:4,800
Conn Socket Strip SKT 6 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
74,798
Estimated Ship Time:6-12 working days
50+$0.3056
100+$0.3056
200+$0.3056
- +
Ext. Price(USD):$24.14
MOQ:79
Mult:1
Conn Socket Strip SKT 14 POS 2.54mm Solder
Available Stock
44
Estimated Ship Time:6-12 working days
1+$4.1104
10+$3.6171
500+$3.5514
1,000+$3.5514
- +
Ext. Price(USD):$24.66
MOQ:6
Mult:1
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.3265
- +
Ext. Price(USD):$2,387.70
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Wire-to-Board Connector, 21 Pos, 2.54mm, Solder RA, TH, Automotive, Box
Pre-order
6,000
Factory Lead Time:16-18 weeks
600+$2.8951
- +
Ext. Price(USD):$1,737.06
MOQ:600
Mult:600
Shrouded Header (3 Sides), 6 Pin, 2mm Pitch, Solder RA Thru-Hole, Bag/Box
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.3175
25,000+$0.2625
1,000,000+$0.175
2,000,000+$0.1663
- +
Ext. Price(USD):$3,175.00
MOQ:10,000
Mult:10,000
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.1246
- +
Ext. Price(USD):$1,518.21
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Shrouded Header HDR 4 POS 2.5mm Solder RA Thru-Hole Box
Available Stock
46
Estimated Ship Time:4-6 working days
26+
2+$8.8494
- +
Ext. Price(USD):$17.69
MOQ:2
Mult:2
SPQ:1
Disconnectable Crimp Style Connector
Available Stock
12,862
Estimated Ship Time:6-7 working days
22+
20+$0.1925
1,000+$0.036
- +
Ext. Price(USD):$3.85
MOQ:20
Mult:20
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.9192
- +
Ext. Price(USD):$1,654.56
MOQ:1,800
Mult:600
SPQ:600
16-Pin, 2mm Connector Header
Pre-order
96,000
Factory Lead Time:22-26 weeks
960+$1.85
1,920+$1.6625
5,024+$1.55
10,016+$1.4625
- +
Ext. Price(USD):$1,776.00
MOQ:960
Mult:960
SPQ:960
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$5.2454
- +
Ext. Price(USD):$6,373.16
MOQ:1,215
Mult:1,215
SPQ:405
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7556
- +
Ext. Price(USD):$1,133.40
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1542
- +
Ext. Price(USD):$1,038.78
MOQ:900
Mult:900
SPQ:300
25 / PageGoto