Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
13-Pin 2mm B-B Receptacle 2.8mm 0.1AU TB
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$1.7375
1,500+$1.55
5,000+$1.45
10,000+$1.3625
- +
Ext. Price(USD):$1,737.50
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4927
- +
Ext. Price(USD):$739.05
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Conn IDC Connector RCP 6 POS 2.5mm IDT ST Cable Mount Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.0781
36,000+$0.0768
60,000+$0.0749
- +
Ext. Price(USD):$937.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 2.00μm Tin Sn Plating without Peg 3.60mm PC Tail Length Pick and Place Cap 46 Circuits Glow Wire Capable Tube
Pre-order
539,000
Factory Lead Time:22-26 weeks
5,390+$1.775
- +
Ext. Price(USD):$9,567.25
MOQ:5,390
Mult:5,390
SPQ:5,390
Molex
ECAD Model:
Pre-order
8,200
Factory Lead Time:22-26 weeks
82+$0.9625
300+$0.9375
1,000+$0.925
- +
Ext. Price(USD):$78.92
MOQ:82
Mult:82
SPQ:82
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7086
- +
Ext. Price(USD):$1,275.48
MOQ:1,800
Mult:1,800
SPQ:600
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$0.1027
- +
Ext. Price(USD):$1,232.40
MOQ:12,000
Mult:6,000
SPQ:3,000
Molex
ECAD Model:
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$2.1625
2,000+$1.8875
5,000+$1.8375
- +
Ext. Price(USD):$2,162.50
MOQ:1,000
Mult:1,000
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 4 Circuits Tin Plated with Peg 3.60mm Tail Glow Wire Capable Tape & Reel
Pre-order
375,000
Factory Lead Time:22-26 weeks
3,750+$1.85
8,100+$1.625
20,100+$1.5875
- +
Ext. Price(USD):$6,937.50
MOQ:3,750
Mult:3,750
Molex
ECAD Model:
Nano-Fit Right-Angle Header, Through Hole, 2.50mm Pitch, Single Row
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$1.9
4,000+$1.6625
10,000+$1.625
- +
Ext. Price(USD):$2,280.00
MOQ:1,200
Mult:1,200
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.484
- +
Ext. Price(USD):$1,306.80
MOQ:2,700
Mult:2,700
SPQ:900
Disconnectable Crimp Style Connectors and Headers
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.2615
- +
Ext. Price(USD):$3,138.00
MOQ:12,000
Mult:12,000
Molex
ECAD Model:
PCB Header 26 Circuits 2.00mm Pitch Dual Row Vertical TH 0.75um Gold Plating w/o Peg 4.60mm Tail Length Pick & Place Cap Glow Wire Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$3.35
- +
Ext. Price(USD):$16,884.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1647
- +
Ext. Price(USD):$1,048.23
MOQ:900
Mult:900
SPQ:300
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$0.3275
25,000+$0.27
1,000,000+$0.18
2,000,000+$0.17
- +
Ext. Price(USD):$6,550.00
MOQ:20,000
Mult:20,000
Unshrouded Header, 17 Pos, 2.5mm Pitch, Solder, ST, Thru-Hole
Pre-order
36,000
Factory Lead Time:16-18 weeks
3,600+$0.3627
- +
Ext. Price(USD):$1,305.72
MOQ:3,600
Mult:3,600
Molex
ECAD Model:
Wire-to-Board Connector, Plug, 28 Pos, 2.54mm, Solder, RA, Thru-Hole, EXTreme PowerPlus™, Tray
Pre-order
160,000
Factory Lead Time:22-26 weeks
1,600+$5.2875
4,000+$4.625
10,000+$4.5375
- +
Ext. Price(USD):$8,460.00
MOQ:1,600
Mult:1,600
Molex
ECAD Model:
Available Stock
50
Estimated Ship Time:3-5 working days
07+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
58
Estimated Ship Time:6-12 working days
1+$23.0272
10+$22.616
250+$22.2048
500+$22.2048
- +
Ext. Price(USD):$46.05
MOQ:2
Mult:1
Header, Unshrouded, 4 Pos, 2.54mm Pitch, RA, Thru-Hole, Solder
Available Stock
1,000
Estimated Ship Time:6-7 working days
22+
1,000+$0.0826
- +
Ext. Price(USD):$82.60
MOQ:1,000
Mult:1,000
JST
ECAD Model:
Shrouded Header HDR 12 POS 5.08mm Solder ST Thru-Hole Box
Available Stock
504
Estimated Ship Time:4-6 working days
23+
72+$3.5909
- +
Ext. Price(USD):$258.54
MOQ:72
Mult:72
SPQ:72
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.2288
12,000+$0.2163
- +
Ext. Price(USD):$1,372.80
MOQ:6,000
Mult:6,000
SPQ:6,000
JST
ECAD Model:
Conn Shrouded Header HDR 10 POS 5.08mm Solder RA Thru-Hole Box
Pre-order
5,600
Factory Lead Time:18-22 weeks
26+
560+$3.2056
1,680+$3.1521
2,800+$3.072
- +
Ext. Price(USD):$1,795.13
MOQ:560
Mult:560
SPQ:560
JST
ECAD Model:
Unshrouded Header HDR 4 POS 3.96mm Solder ST Thru-Hole
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.1831
27,000+$0.1801
45,000+$0.1755
- +
Ext. Price(USD):$1,647.90
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.9081
- +
Ext. Price(USD):$3,434.58
MOQ:1,800
Mult:600
SPQ:600
25 / PageGoto