Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.626
- +
Ext. Price(USD):$2,439.00
MOQ:1,500
Mult:500
SPQ:500
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 14 POS 1.5mm Solder ST SMD Pico-SPOX™ T/R
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.675
4,000+$0.65
5,000+$0.6125
- +
Ext. Price(USD):$1,350.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Molex
ECAD Model:
Wire-to-Board HDR 12 Pos 1.25mm Solder RA Side Entry SMD T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.6125
8,000+$1.4125
20,000+$1.375
- +
Ext. Price(USD):$4,837.50
MOQ:3,000
Mult:3,000
Pre-order
2,500,000
Factory Lead Time:11 weeks
5,000+$0.3029
- +
Ext. Price(USD):$1,514.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.8618
- +
Ext. Price(USD):$1,034.16
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Pre-order
1,500,000
Factory Lead Time:22-26 weeks
15,000+$0.1275
30,000+$0.1213
- +
Ext. Price(USD):$1,912.50
MOQ:15,000
Mult:15,000
SPQ:15,000
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 0.38um Gold Au Plating without Peg 2.60mm PC Tail Length without Pick and Place Cap 50 Circuits Glow Wire Capable Tube
Pre-order
450,000
Factory Lead Time:22-26 weeks
4,500+$3
- +
Ext. Price(USD):$13,500.00
MOQ:4,500
Mult:4,500
SPQ:4,500
Molex
ECAD Model:
Conn Board to Board RCP 22 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.9997
30+$0.9829
50+$0.9485
- +
Ext. Price(USD):$9.99
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.1368
- +
Ext. Price(USD):$1,534.68
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
2,500
Factory Lead Time:10-16 weeks
24+
250+$1.9658
500+$1.9144
- +
Ext. Price(USD):$491.45
MOQ:250
Mult:250
SPQ:250
JST Board-to-Board Connector, CZ Series, 6 Pos, 1.5mm, 2mm Pitch, Plug, TH
Available Stock
5,602
Estimated Ship Time:6-7 working days
22+
20+$0.3553
720+$0.1438
- +
Ext. Price(USD):$7.10
MOQ:20
Mult:20
Step-Z Plug 15mm 200P LF Ht
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$56.675
5,000+$51
10,000+$45.3375
- +
Ext. Price(USD):$56,675.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.6929
- +
Ext. Price(USD):$935.41
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7939
- +
Ext. Price(USD):$1,190.85
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.8332
- +
Ext. Price(USD):$1,649.88
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Wire-to-Board Connector HDR 3 Pos 3.96mm Solder ST Top Entry TH
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.3331
36,000+$0.3275
60,000+$0.3192
- +
Ext. Price(USD):$3,997.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Amphenol T821 Series Wire-to-Board Connector, 6-Pin Header, 2.54mm Pitch, Straight, TH
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.1685
- +
Ext. Price(USD):$0.16
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Connector Receptacle 1 Pos Solder RA Thru-Hole
Available Stock
337
Estimated Ship Time:6-12 working days
1+$6.6375
5+$6.6375
100+$5.7348
250+$5.7348
- +
Ext. Price(USD):$26.55
MOQ:4
Mult:1
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.475
6,000+$0.45
- +
Ext. Price(USD):$1,425.00
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6512
- +
Ext. Price(USD):$1,758.24
MOQ:2,700
Mult:2,700
SPQ:900
Board-to-Board Receptacle Connector 24 POS 1mm Solder Right Angle SMD
Pre-order
5,250,000
Factory Lead Time:8 weeks
10,500+$0.928
- +
Ext. Price(USD):$9,744.00
MOQ:10,500
Mult:2,100
SPQ:2,100
JST
ECAD Model:
Conn Shrouded Header HDR 26 POS 1.5mm Solder ST Thru-Hole
Available Stock
1,960
Estimated Ship Time:4-6 working days
280+$0.8042
- +
Ext. Price(USD):$225.17
MOQ:280
Mult:280
SPQ:280
Molex
ECAD Model:
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$1.3
12,000+$1.1375
30,000+$1.1125
- +
Ext. Price(USD):$7,800.00
MOQ:6,000
Mult:6,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.5174
- +
Ext. Price(USD):$3,776.10
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.0011
- +
Ext. Price(USD):$1,801.98
MOQ:1,800
Mult:600
SPQ:600
25 / PageGoto