Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,125,000
Factory Lead Time:15 weeks
2,250+$0.672
- +
Ext. Price(USD):$1,512.00
MOQ:2,250
Mult:2,250
SPQ:1,125
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$0.9662
- +
Ext. Price(USD):$1,478.28
MOQ:1,530
Mult:1,530
SPQ:765
JST
ECAD Model:
Disconnectable Insulation Displacement Connectors
Pre-order
40,000
Factory Lead Time:18-22 weeks
26+
4,000+$0.3365
12,000+$0.331
20,000+$0.3226
- +
Ext. Price(USD):$1,346.00
MOQ:4,000
Mult:4,000
SPQ:4,000
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.4248
- +
Ext. Price(USD):$1,019.52
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3573
- +
Ext. Price(USD):$3,182.35
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9419
- +
Ext. Price(USD):$1,271.56
MOQ:1,350
Mult:1,350
SPQ:450
Harwin
ECAD Model:
Datamate J-Tek DIL Male Vertical 3mm PC Tail Connector, selective gold/tin, jackscrews/5mm board mount, 5/5 contacts
Available Stock
22
Estimated Ship Time:6-12 working days
1+$20.2831
10+$19.9209
250+$19.5587
500+$19.5587
- +
Ext. Price(USD):$40.56
MOQ:2
Mult:1
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.2468
- +
Ext. Price(USD):$4,383.18
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1212
- +
Ext. Price(USD):$2,018.16
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Unshrouded Header HDR 2 POS 8mm Solder ST Thru-Hole Box
Available Stock
485
Estimated Ship Time:14-17 working days
100+$0.2493
300+$0.1945
5,000+$0.1427
10,000+$0.1427
- +
Ext. Price(USD):$50.10
MOQ:201
Mult:1
SPQ:1
Wire-to-Board HDR 18 Pos 4.2mm Solder Right Angle Side Entry Thru-Hole
Pre-order
360,000
Factory Lead Time:15 weeks
720+$5.961
- +
Ext. Price(USD):$4,291.92
MOQ:720
Mult:720
SPQ:240
Amphenol
ECAD Model:
Available Stock
1,947
Estimated Ship Time:3-5 working days
1+$5.1588
200+$4.8192
600+$4.6093
- +
Ext. Price(USD):$5.15
MOQ:1
Mult:1
SPQ:200
Conn Unshrouded Header HDR 7 POS 2.54mm Solder ST Thru-Hole Automotive Carton
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.2
1,000+$1.15
5,000+$0.85
10,000+$0.6625
50,000+$0.5375
- +
Ext. Price(USD):$300.00
MOQ:250
Mult:250
SPQ:250
MEZZ CONN, HERMA, 60P, 2ROW, 0.5MM, SMT;
Available Stock
4
Estimated Ship Time:6-12 working days
1+$11.0231
10+$10.2882
25+$10.1045
100+$9.9208
250+$9.9208
- +
Ext. Price(USD):$33.06
MOQ:3
Mult:1
Conn Shrouded Header HDR 2 POS 3.96mm Solder ST Thru-Hole Box
Available Stock
27,608
Estimated Ship Time:5-9 working days
22+
10+$0.0958
50+$0.076
150+$0.0748
- +
Ext. Price(USD):$0.95
MOQ:10
Mult:5
SPQ:1,000
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5407
- +
Ext. Price(USD):$1,386.63
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder ST Thru-Hole Tube
Pre-order
204,000
Factory Lead Time:22-26 weeks
2,040+$1.0375
4,080+$0.975
- +
Ext. Price(USD):$2,116.50
MOQ:2,040
Mult:2,040
SPQ:2,040
Wire-to-Board Connector HDR 18 Pos 3mm Solder Straight Top Entry TH
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$1.673
- +
Ext. Price(USD):$2,710.26
MOQ:1,620
Mult:1,620
SPQ:540
Conn Shrouded Header HDR 10 POS 3.81mm Solder RA Thru-Hole Box
Available Stock
74
Estimated Ship Time:6-7 working days
20+$2.9271
- +
Ext. Price(USD):$58.54
MOQ:20
Mult:20
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5818
- +
Ext. Price(USD):$3,485.43
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.8143
- +
Ext. Price(USD):$4,577.16
MOQ:1,200
Mult:1,200
SPQ:400
Pre-order
3,500
Factory Lead Time:22-26 weeks
35+$4.05
85+$3.8875
- +
Ext. Price(USD):$141.75
MOQ:35
Mult:35
0.50 HSL Connector Cap Assy Key-AW/Spring
Pre-order
43,200
Factory Lead Time:22-26 weeks
432+$3.9125
864+$3.5
- +
Ext. Price(USD):$1,690.20
MOQ:432
Mult:432
SPQ:432
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7712
- +
Ext. Price(USD):$1,156.80
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.5418
- +
Ext. Price(USD):$3,812.70
MOQ:1,500
Mult:1,500
SPQ:500
25 / PageGoto