Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Wire-to-Board M 8 POS 3mm Solder ST Top Entry TH T/R
Available Stock
1,130
Estimated Ship Time:6-12 working days
10+$1.1312
100+$1.111
500+$1.111
1,000+$1.0908
2,500+$1.0908
- +
Ext. Price(USD):$24.88
MOQ:22
Mult:1
Disconnectable Crimp Style Connectors, 2.0mm Pitch
Available Stock
4,895
Estimated Ship Time:6-7 working days
22+
20+$0.045
1,000+$0.0153
- +
Ext. Price(USD):$0.90
MOQ:20
Mult:20
Pre-order
198,000
Factory Lead Time:22-26 weeks
1,980+$4.9375
5,005+$4.6125
10,010+$4.3375
- +
Ext. Price(USD):$9,776.25
MOQ:1,980
Mult:1,980
SPQ:1,980
Pre-order
2,100,000
Factory Lead Time:11 weeks
4,200+$3.5585
- +
Ext. Price(USD):$14,945.70
MOQ:4,200
Mult:4,200
SPQ:4,200
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Vertical, SMT
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$3.7029
- +
Ext. Price(USD):$22,217.40
MOQ:6,000
Mult:6,000
SPQ:600
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.5407
- +
Ext. Price(USD):$2,311.05
MOQ:1,500
Mult:1,500
SPQ:500
Connector Unshrouded Header HDR 7 POS 2.5mm Solder ST Thru-Hole
Available Stock
826
Estimated Ship Time:14-17 working days
100+$0.3083
500+$0.2743
1,000+$0.2667
2,000+$0.2422
4,000+$0.241
- +
Ext. Price(USD):$50.25
MOQ:163
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
70,000
Factory Lead Time:22-26 weeks
700+$3.225
1,400+$3.15
2,500+$2.7375
5,000+$2.5625
- +
Ext. Price(USD):$2,257.50
MOQ:700
Mult:700
SPQ:700
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH
Pre-order
270,000
Factory Lead Time:15 weeks
540+$1.4136
- +
Ext. Price(USD):$763.34
MOQ:540
Mult:540
SPQ:180
JST
ECAD Model:
Conn Shrouded Header HDR 8 POS 2.5mm Solder ST Top Entry Thru-Hole Bag
Available Stock
4,256
Estimated Ship Time:5-9 working days
22+
10+$0.3733
50+$0.2886
150+$0.2837
- +
Ext. Price(USD):$3.73
MOQ:10
Mult:5
SPQ:250
Molex
ECAD Model:
Wire-to-Board Receptacle, Dual Row, 1.50mm Pitch, 10 Circuits, Vertical, SMD, Gold Plated, Natural
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$2.1125
8,100+$1.85
20,250+$1.8125
- +
Ext. Price(USD):$5,703.75
MOQ:2,700
Mult:2,700
JST
ECAD Model:
Conn Shrouded Header (3 Sides) HDR 4 POS 2.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
12,000
Estimated Ship Time:4-6 working days
1,000+$0.0326
- +
Ext. Price(USD):$32.60
MOQ:1,000
Mult:1,000
SPQ:1,000
JST
ECAD Model:
Shrouded Header HDR 2 Pos 2mm Solder Straight SMD T/R
Pre-order
80,000
Factory Lead Time:18-22 weeks
26+
8,000+$0.1486
24,000+$0.1461
40,000+$0.1424
- +
Ext. Price(USD):$1,188.80
MOQ:8,000
Mult:8,000
SPQ:8,000
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 2mm Solder RA Thru-Hole Automotive Box
Available Stock
15,000
Estimated Ship Time:6-7 working days
22+
1,000+$0.0803
- +
Ext. Price(USD):$80.30
MOQ:1,000
Mult:1,000
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5014
- +
Ext. Price(USD):$902.52
MOQ:1,800
Mult:1,800
SPQ:600
Conn Unshrouded Header M 7 POS 3.5mm Solder ST Thru-Hole
Available Stock
40
Estimated Ship Time:4-6 working days
1+$0.3418
- +
Ext. Price(USD):$0.34
MOQ:1
Mult:1
SPQ:1
Wire to Board Connector HDR, 28 Pos, 2.54mm Pitch, Solder, ST, Thru-Hole
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.525
1,000+$2.3875
2,500+$2.225
5,000+$2.125
10,000+$2.0375
- +
Ext. Price(USD):$1,262.50
MOQ:500
Mult:500
SPQ:500
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3684
- +
Ext. Price(USD):$1,231.56
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 16 Pos 3mm Solder RA Side Entry Thru-Hole T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.8078
- +
Ext. Price(USD):$1,938.72
MOQ:2,400
Mult:800
SPQ:800
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7869
- +
Ext. Price(USD):$1,180.35
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Board to Board Connector, 21 Pos, 1.25mm Pitch, Solder, Straight, Thru-Hole
Available Stock
50
Estimated Ship Time:6-7 working days
20+$1.2517
- +
Ext. Price(USD):$25.03
MOQ:20
Mult:20
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.665
- +
Ext. Price(USD):$5,386.50
MOQ:8,100
Mult:8,100
SPQ:2,700
CONNECTOR, HEADER, 60POS, 2ROW, 2.5MM; Pitch Spacing:2.54mm; No. of Contacts:60Contacts; Gender:Header; Product Range:-; Contact Termination Type:Through Hole; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Con
Available Stock
2,218
Estimated Ship Time:6-12 working days
10+$0.6742
50+$0.6742
100+$0.604
200+$0.604
- +
Ext. Price(USD):$24.27
MOQ:36
Mult:1
JST
ECAD Model:
Conn IDC Connector RCP 11 POS 2mm IDT RA Cable Mount Box
Available Stock
6,009
Estimated Ship Time:6-7 working days
26+
20+$0.3546
1,000+$0.1204
- +
Ext. Price(USD):$7.09
MOQ:20
Mult:20
Wire-to-Board HDR 20 Pos 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
405,000
Factory Lead Time:15 weeks
810+$1.4084
- +
Ext. Price(USD):$1,140.80
MOQ:810
Mult:810
SPQ:270
25 / PageGoto