Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
57,600
Factory Lead Time:22-26 weeks
576+$2.0875
1,120+$1.8625
- +
Ext. Price(USD):$1,202.40
MOQ:576
Mult:576
SPQ:576
Wire-to-Board Connector, HDR/SKT, 4 POS, 4mm Pitch, Solder, RA, Side Entry, SMD, Tape
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$1.8625
50,000+$1.4875
100,000+$1.425
250,000+$1.35
- +
Ext. Price(USD):$22,350.00
MOQ:12,000
Mult:12,000
Header 5-Pin RAST 5 Tab TH
Pre-order
120,000
Factory Lead Time:25-42 weeks
1,200+$0.3912
- +
Ext. Price(USD):$469.44
MOQ:1,200
Mult:1,200
SPQ:1,200
Pre-order
300,000
Factory Lead Time:25-42 weeks
3,000+$0.4375
- +
Ext. Price(USD):$1,312.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$2.175
2,000+$2.05
5,000+$1.925
10,000+$1.8
- +
Ext. Price(USD):$2,175.00
MOQ:1,000
Mult:1,000
SPQ:1,000
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
22
Estimated Ship Time:4-6 working days
26+
10+$1.1316
- +
Ext. Price(USD):$11.31
MOQ:10
Mult:10
SPQ:1
JST
ECAD Model:
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.147
- +
Ext. Price(USD):$1,764.00
MOQ:12,000
Mult:12,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$4.1696
- +
Ext. Price(USD):$4,503.16
MOQ:1,080
Mult:1,080
SPQ:360
Shrouded Header, HDR, 10 Pos, 2mm, Solder, ST, TH, Box
Available Stock
3,555
Estimated Ship Time:6-7 working days
22+
20+$0.4371
200+$0.2264
- +
Ext. Price(USD):$8.74
MOQ:20
Mult:20
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$6.6799
- +
Ext. Price(USD):$4,208.33
MOQ:630
Mult:630
SPQ:210
Amphenol
ECAD Model:
CARD EDGE CONN, DUAL SIDE, 16POS;
Available Stock
2,389
Estimated Ship Time:6-12 working days
1+$4.7375
10+$4.548
500+$4.0932
1,000+$4.0932
- +
Ext. Price(USD):$28.42
MOQ:6
Mult:1
Molex
ECAD Model:
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$0.3263
6,000+$0.3088
- +
Ext. Price(USD):$489.45
MOQ:1,500
Mult:1,500
SPQ:1,500
Wire to Board Connector 3.0mm Right Angle TH Header
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.4822
- +
Ext. Price(USD):$6,578.64
MOQ:1,200
Mult:1,200
SPQ:240
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.0011
- +
Ext. Price(USD):$1,351.48
MOQ:1,350
Mult:450
SPQ:450
Wire to Board Connector 3.0mm Right Angle TH Header
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$2.9527
- +
Ext. Price(USD):$3,720.40
MOQ:1,260
Mult:1,260
SPQ:420
Molex
ECAD Model:
Available Stock
19
Estimated Ship Time:3-5 working days
07+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn IDC RCP 10 POS 1.27mm IDT ST Cable Mount Picoflex® T/R
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$1.1625
32,000+$1.0625
64,000+$1.0375
- +
Ext. Price(USD):$23,250.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Conn Board Stacker HDR 6 POS 2.54mm Solder ST Top Entry SMD Bag
Pre-order
10,000
Factory Lead Time:10-16 weeks
24+
1,000+$2.8257
2,000+$2.7519
- +
Ext. Price(USD):$2,825.70
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3903
- +
Ext. Price(USD):$3,226.90
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 30 POS 2mm Solder ST Top Entry SMD Milli-Grid™ Tube
Pre-order
40,000
Factory Lead Time:22-26 weeks
400+$1.225
800+$1.125
1,600+$1.075
2,500+$0.925
5,000+$0.8625
- +
Ext. Price(USD):$490.00
MOQ:400
Mult:400
SPQ:400
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.538
- +
Ext. Price(USD):$968.40
MOQ:1,800
Mult:1,800
SPQ:600
CONNECTOR, HEADER, 30POS, 2.54MM; Pitch Spacing:2.54mm; No. of Contacts:30Contacts; Gender:Header; Product Range:-; Contact Termination Type:Surface Mount; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; Contact
Available Stock
3,665
Estimated Ship Time:6-12 working days
1+$0.9724
50+$0.9335
100+$0.8713
200+$0.8713
- +
Ext. Price(USD):$24.31
MOQ:25
Mult:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 2 POS 2mm Solder RA Thru-Hole Tube
Pre-order
522,000
Factory Lead Time:22-26 weeks
5,220+$1.125
- +
Ext. Price(USD):$5,872.50
MOQ:5,220
Mult:5,220
SPQ:5,220
JST
ECAD Model:
Conn IDC RCP 4 POS 2.5mm IDT RA Cable Mount Box
Available Stock
4,039
Estimated Ship Time:5-9 working days
22+
10+$0.2765
50+$0.2113
150+$0.2078
- +
Ext. Price(USD):$2.76
MOQ:10
Mult:5
SPQ:1,000
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$6.1125
550+$5.9531
- +
Ext. Price(USD):$3,056.25
MOQ:500
Mult:50
SPQ:50
25 / PageGoto