Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol Industrial PCB Enclosure, AIPXE Series, Polycarbonate, 118.8mm × 114mm × 34.75mm, 24-Pin
Available Stock
168
Estimated Ship Time:7-9 working days
21+
9+$12.738
200+$12.738
500+$12.364
- +
Ext. Price(USD):$114.64
MOQ:9
Mult:1
SPQ:1
Harwin
ECAD Model:
Backshell, Gecko Series, 34-Pin, Free Hanging
Available Stock
173
Estimated Ship Time:9-14 working days
1+$137.7324
10+$117.0785
25+$109.7556
50+$104.5239
100+$99.543
- +
Ext. Price(USD):$137.73
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
24-Pin~36-Pin Pull Tab 891 Series 76.2mm(L) × 25.4mm(W)
Available Stock
5,990
Estimated Ship Time:6-13 working days
10+$0.866
25+$0.7728
1,000+$0.5659
2,000+$0.5638
- +
Ext. Price(USD):$14.72
MOQ:17
Mult:1
SPQ:1
Amphenol
ECAD Model:
Polarizing Device (Key, Plug, Post)
Available Stock
2,218
Estimated Ship Time:6-13 working days
25+$0.3887
100+$0.3542
5,000+$0.2581
10,000+$0.2354
- +
Ext. Price(USD):$14.38
MOQ:37
Mult:1
SPQ:1
Cap (Cover), Dust MTA-156 Series, 24-Pin
Available Stock
138
Estimated Ship Time:6-13 working days
25+$0.544
100+$0.4697
5,000+$0.3035
10,000+$0.2905
- +
Ext. Price(USD):$14.14
MOQ:26
Mult:1
SPQ:1
JAE
ECAD Model:
Polarizing Device (Key, Plug, Post) QE Series
Available Stock
81
Estimated Ship Time:9-14 working days
1+$8.1216
10+$6.9001
500+$5.2354
1,000+$4.9857
- +
Ext. Price(USD):$32.48
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
10-Pin Cap (Cover)
Available Stock
307
Estimated Ship Time:6-13 working days
1+$1.9205
50+$1.419
5,000+$0.7517
10,000+$0.6988
- +
Ext. Price(USD):$15.36
MOQ:8
Mult:1
SPQ:1
TE Connectivity Stress Relief, Metrimate Series, For Metrimate Square Plug and Socket
Available Stock
150
Estimated Ship Time:5-10 working days
1+$14.212
20+$13.8041
75+$13.358
300+$13.0138
600+$12.6952
- +
Ext. Price(USD):$14.21
MOQ:1
Mult:1
Amphenol
ECAD Model:
PickUp Cap, MEG-Array Series
Available Stock
511
Estimated Ship Time:7-9 working days
19+
66+$1.672
299+$1.595
- +
Ext. Price(USD):$110.35
MOQ:66
Mult:1
SPQ:1
Strain Relief Connector 8-Pin Universal MATE-N-LOK Series
Available Stock
11,709
Estimated Ship Time:6-13 working days
1+$1.656
10+$1.4145
250+$1.08
500+$1.0465
- +
Ext. Price(USD):$14.90
MOQ:9
Mult:1
SPQ:1
Filler Plugs Rectangular Accessories
Available Stock
55
Estimated Ship Time:7-9 working days
19+
16+$7.095
600+$7.095
- +
Ext. Price(USD):$113.52
MOQ:16
Mult:1
SPQ:1
Deutsch DT Series Connector Backshell, 8 Contacts
Available Stock
2,005
Estimated Ship Time:5-10 working days
5+$2.9036
50+$2.8449
125+$2.7277
250+$2.6792
500+$2.6181
- +
Ext. Price(USD):$14.51
MOQ:5
Mult:5
32-Pin Secondary Lock
Available Stock
5,589
Estimated Ship Time:6-13 working days
10+$0.6107
25+$0.5589
5,000+$0.3262
8,000+$0.3089
- +
Ext. Price(USD):$14.53
MOQ:26
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
5+$268.4858
10+$263.115
50+$257.853
100+$252.6959
500+$247.642
- +
Ext. Price(USD):$1,342.42
MOQ:5
Mult:5
SPQ:1
4-Pin Strain Relief, Omnimate RSV Series
Available Stock
148
Estimated Ship Time:9-14 working days
1+$218.6568
10+$185.8799
25+$174.2571
50+$165.9528
- +
Ext. Price(USD):$218.65
MOQ:1
Mult:1
SPQ:1
AMPSEAL Connector Backshell, 2-Pin
Available Stock
103
Estimated Ship Time:7-9 working days
17+
55+$2.145
- +
Ext. Price(USD):$117.97
MOQ:55
Mult:1
SPQ:1
Jackscrew Mini-Box Series, Thread Mount
Available Stock
1,511
Estimated Ship Time:7-9 working days
21+
3+$41.558
7+$40.843
14+$40.128
27+$39.413
1,000+$35.827
- +
Ext. Price(USD):$124.67
MOQ:3
Mult:1
SPQ:1
6-Pin Retainer iBridge Ultra Female Connector
Available Stock
1,800
Estimated Ship Time:7-9 working days
19+
550+$0.2167
1,200+$0.2002
- +
Ext. Price(USD):$119.18
MOQ:550
Mult:1
SPQ:1
Molex
ECAD Model:
14-Pin Shroud C-Grid SL Series, Wire Mount, 51.95mm L × 8.12mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Con Spring Finger 0.4-0.75mm SMD
Available Stock
13,919
Estimated Ship Time:7-9 working days
18+
10,000+$0.0858
- +
Ext. Price(USD):$858.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Molex
ECAD Model:
Conn Housing RCP 5 POS 2.54mm Crimp ST Cable Mount Natural SL™ Carton
Available Stock
2,575
Estimated Ship Time:9-14 working days
50+$0.3236
100+$0.3081
1,000+$0.2619
2,500+$0.2455
- +
Ext. Price(USD):$26.21
MOQ:81
Mult:1
SPQ:1
Pancon
ECAD Model:
Tools and Accessories, Hand Tool for MC Pin Products
Available Stock
13
Estimated Ship Time:5-12 working days
1+$67.5808
5+$59.235
100+$49.9369
250+$49.2735
- +
Ext. Price(USD):$67.58
MOQ:1
Mult:1
SPQ:1
24-Pin Shroud, AMPMODU MTE Series
Available Stock
2,048
Estimated Ship Time:7-9 working days
12+
60+$1.969
150+$1.936
300+$1.903
600+$1.87
- +
Ext. Price(USD):$118.14
MOQ:60
Mult:1
SPQ:1
34-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
1,986
Estimated Ship Time:7-9 working days
24+
45+$2.695
150+$2.651
500+$2.497
1,000+$2.255
- +
Ext. Price(USD):$121.27
MOQ:45
Mult:1
SPQ:1
Cap (Cover), AMP-LATCH Series, 26-Pin, 35.2044mm L
Available Stock
2,996
Estimated Ship Time:7-9 working days
14+
40+$2.937
95+$2.882
200+$2.827
400+$2.772
- +
Ext. Price(USD):$117.48
MOQ:40
Mult:1
SPQ:1
25 / PageGoto