Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Samtec
ECAD Model:
Samtec Contact, Pin, for Seam Series
Available Stock
1,607
Estimated Ship Time:6-13 working days
1+$5.3475
25+$4.536
1,000+$3.0564
2,500+$2.43
- +
Ext. Price(USD):$16.04
MOQ:3
Mult:1
SPQ:1
3M
ECAD Model:
Pull Tab 3000 Series 78.7mm × 78.7mm × 76.2mm
Available Stock
555
Estimated Ship Time:6-13 working days
1+$3.289
10+$2.7945
500+$1.7712
1,000+$1.7496
- +
Ext. Price(USD):$16.44
MOQ:5
Mult:1
SPQ:1
Samtec
ECAD Model:
Capacitor Cover, 20-Pin
Available Stock
4,815
Estimated Ship Time:6-13 working days
1+$1.9205
50+$1.419
1,000+$0.9137
5,000+$0.8899
- +
Ext. Price(USD):$15.36
MOQ:8
Mult:1
SPQ:1
Connector Accessory Ejector Latch Connectors
Available Stock
1,918
Estimated Ship Time:7-9 working days
21+
400+$0.352
1,120+$0.3036
2,320+$0.2882
4,640+$0.275
10,000+$0.2629
- +
Ext. Price(USD):$140.80
MOQ:400
Mult:80
SPQ:80
ITT Cannon
ECAD Model:
3-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
18
Estimated Ship Time:9-14 working days
1+$4.1148
10+$3.4916
1,000+$2.5224
2,500+$2.3647
- +
Ext. Price(USD):$28.80
MOQ:7
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
556
Estimated Ship Time:6-13 working days
1+$3.4615
10+$3.003
1,000+$2.2356
2,500+$2.1276
- +
Ext. Price(USD):$17.30
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
50-Pin Strain Relief, QF 50 Series, Clamp Mount, Wire Mount, Threaded Mount, 63.13mm L × 3.9mm H
Available Stock
6,559
Estimated Ship Time:7-9 working days
12+
1,191+$0.0495
- +
Ext. Price(USD):$58.95
MOQ:1,191
Mult:1
SPQ:1
TE Connectivity Shielding Clip, Copper Alloy, Surface Mount, 7mm × 2.5mm × 4mm
Available Stock
33,671
Estimated Ship Time:6-13 working days
1+$0.7475
10+$0.6532
2,000+$0.4396
4,000+$0.4018
- +
Ext. Price(USD):$14.23
MOQ:26
Mult:1
SPQ:1
Hirose Holder, EnerBee DF33C Series
Available Stock
3,150
Estimated Ship Time:6-13 working days
10+$0.1886
100+$0.1806
5,000+$0.1199
10,000+$0.1112
- +
Ext. Price(USD):$14.14
MOQ:75
Mult:1
SPQ:1
Molex
ECAD Model:
Molex TPA Retainer for Micro-One Receptacle Housing
Available Stock
37,777
Estimated Ship Time:7-9 working days
24+
2,223+$0.0528
12,000+$0.0517
24,000+$0.0506
40,000+$0.0495
- +
Ext. Price(USD):$117.37
MOQ:2,223
Mult:1
SPQ:1
Molex
ECAD Model:
Connector 16-Pin Retention Key Mini-Fit Jr Series Wire Mount, 5.33mm H
Available Stock
8,728
Estimated Ship Time:7-9 working days
21+
1,588+$0.0737
4,000+$0.0715
8,000+$0.0704
- +
Ext. Price(USD):$117.03
MOQ:1,588
Mult:1
SPQ:1
TE Connectivity Stress Relief, AMP-LATCH Series, For AMPLATCH Series
Available Stock
400
Estimated Ship Time:7-10 working days
22+
250+$0.495
- +
Ext. Price(USD):$123.75
MOQ:250
Mult:50
SPQ:50
Screws PQ50 Series Thread Mount
Available Stock
4,533
Estimated Ship Time:6-13 working days
25+$0.2795
100+$0.276
1,000+$0.2376
5,000+$0.1663
10,000+$0.1339
- +
Ext. Price(USD):$14.25
MOQ:51
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Cover, DIN Rail Mount, For PCB Connectors
Available Stock
124
Estimated Ship Time:5-10 working days
1+$1.4531
10+$1.4403
100+$1.4021
- +
Ext. Price(USD):$7.26
MOQ:5
Mult:1
Molex
ECAD Model:
22-Pin Shroud C-Grid SL Series, Clip Mount, Free Hanging
Available Stock
280
Estimated Ship Time:9-14 working days
10+$2.2972
25+$2.1527
50+$2.0498
100+$1.9518
- +
Ext. Price(USD):$27.56
MOQ:12
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief, Strain Relief Clamp, For 3000 Series
Available Stock
560
Estimated Ship Time:5-10 working days
10+$1.0541
250+$1.0222
750+$0.9904
2,000+$0.9674
4,000+$0.9534
- +
Ext. Price(USD):$10.54
MOQ:10
Mult:10
Connector Accessories, Sealing Gasket, Straight, Yellow
Available Stock
382
Estimated Ship Time:6-13 working days
1+$13.2825
10+$11.4696
500+$8.262
1,000+$7.776
- +
Ext. Price(USD):$26.56
MOQ:2
Mult:1
SPQ:1
Cap (Cover), Protective 20-Pin MTC100 Series
Available Stock
3
Estimated Ship Time:7-9 working days
16+
1+$370.843
130+$370.843
250+$349.03
500+$327.228
1,000+$305.404
- +
Ext. Price(USD):$370.84
MOQ:1
Mult:1
SPQ:1
28-Pin Cap (Cover) 0600 Series Header SMD
Available Stock
86
Estimated Ship Time:9-14 working days
1+$6.4584
10+$5.4864
1,000+$3.9637
2,500+$3.7158
- +
Ext. Price(USD):$32.29
MOQ:5
Mult:1
SPQ:1
12-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
19,918
Estimated Ship Time:9-14 working days
50+$0.3985
100+$0.3795
1,000+$0.3225
2,500+$0.3023
- +
Ext. Price(USD):$26.30
MOQ:66
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Terminal Locking Strip, SL Series
Available Stock
20,440
Estimated Ship Time:7-9 working days
18+
589+$0.198
1,500+$0.1947
9,000+$0.1826
20,000+$0.1606
- +
Ext. Price(USD):$116.62
MOQ:589
Mult:1
SPQ:1
1-Pin Collet, Panel Mount
Available Stock
9,302
Estimated Ship Time:6-13 working days
1+$1.7365
10+$1.472
2,500+$0.9364
5,000+$0.8478
- +
Ext. Price(USD):$15.62
MOQ:9
Mult:1
SPQ:1
Grommet, ePower Series
Available Stock
10
Estimated Ship Time:9-14 working days
1+$19.6236
10+$16.6806
- +
Ext. Price(USD):$39.24
MOQ:2
Mult:1
SPQ:1
3M
ECAD Model:
14-Pin Strain Relief 4600 Series 26.7mm L × 6.1mm H
Available Stock
2,910
Estimated Ship Time:9-14 working days
10+$1.8533
25+$1.7366
1,000+$1.3383
2,500+$1.2546
- +
Ext. Price(USD):$27.79
MOQ:15
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot AT Series™
Available Stock
156
Estimated Ship Time:6-13 working days
1+$1.748
10+$1.4835
2,700+$0.8694
5,100+$0.85
- +
Ext. Price(USD):$15.73
MOQ:9
Mult:1
SPQ:1
25 / PageGoto