Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
8-Pin Terminal Position Assurance (TPA) Mini-Fit Jr Series
Available Stock
30,000
Estimated Ship Time:7-9 working days
15+
1,429+$0.0814
3,600+$0.0792
7,200+$0.0781
14,300+$0.077
30,000+$0.0759
- +
Ext. Price(USD):$116.32
MOQ:1,429
Mult:1
SPQ:1
2-Pin Strain Relief
Available Stock
8,256
Estimated Ship Time:6-13 working days
25+$0.3278
100+$0.3047
5,130+$0.2495
10,260+$0.2452
- +
Ext. Price(USD):$14.09
MOQ:43
Mult:1
SPQ:1
18-Pin Cap (Cover) AMPMODU MT Series
Available Stock
5,727
Estimated Ship Time:6-13 working days
1+$1.495
10+$1.3455
2,500+$0.8878
5,000+$0.8845
- +
Ext. Price(USD):$14.80
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin TPA C-Grid SL Series Wire Mount 3.2mm H
Available Stock
16,646
Estimated Ship Time:7-9 working days
22+
863+$0.1353
2,200+$0.1331
4,400+$0.1309
8,700+$0.1276
12,000+$0.1243
- +
Ext. Price(USD):$116.76
MOQ:863
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), SL-156 Series
Available Stock
60,000
Estimated Ship Time:7-9 working days
22+
3,000+$0.0385
15,000+$0.0374
30,000+$0.0363
- +
Ext. Price(USD):$115.50
MOQ:3,000
Mult:1
SPQ:1
40-Pin Shroud, AMPMODU MTE Series
Available Stock
1,450
Estimated Ship Time:7-9 working days
24+
48+$2.332
148+$2.222
591+$2.112
- +
Ext. Price(USD):$111.93
MOQ:48
Mult:1
SPQ:1
Molex
ECAD Model:
32-Pin Clip Mini Mi II 54596 Series Clamp Mount
Available Stock
4,800
Estimated Ship Time:7-9 working days
17+
736+$0.0792
- +
Ext. Price(USD):$58.29
MOQ:736
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) Box Series, PCB Mount
Available Stock
2,577
Estimated Ship Time:5-12 working days
5+$8.8435
25+$7.931
500+$7.5328
1,000+$6.5912
- +
Ext. Price(USD):$44.21
MOQ:5
Mult:1
SPQ:100
Molex
ECAD Model:
6-Pin Backshell, MX150 Series, Free Hanging
Available Stock
2,313
Estimated Ship Time:7-9 working days
26+
49+$2.387
150+$2.343
3,000+$1.892
6,000+$1.793
- +
Ext. Price(USD):$116.96
MOQ:49
Mult:1
SPQ:1
Panel Mount Frame 79.3mm(L) × 40.6mm(W)
Available Stock
96
Estimated Ship Time:6-13 working days
1+$25.461
10+$22.1076
250+$16.9668
500+$16.7724
- +
Ext. Price(USD):$25.46
MOQ:1
Mult:1
SPQ:1
26-Pin Shroud, Mini CT Series, Board Mount
Available Stock
19,938
Estimated Ship Time:7-9 working days
24+
500+$0.33
1,000+$0.3245
2,000+$0.319
3,500+$0.3124
- +
Ext. Price(USD):$165.00
MOQ:500
Mult:1
SPQ:1
36-Pin Strain Relief Omnimate RSV Series
Available Stock
20
Estimated Ship Time:5-12 working days
10+$13.761
30+$13.365
500+$11.2136
1,000+$11.0852
- +
Ext. Price(USD):$137.61
MOQ:10
Mult:10
SPQ:10
3M
ECAD Model:
Ejector Latch, Long, 3000 Series
Available Stock
4,576
Estimated Ship Time:9-14 working days
25+$0.7875
50+$0.7497
1,000+$0.6067
2,600+$0.5672
- +
Ext. Price(USD):$26.77
MOQ:34
Mult:1
SPQ:1
Molex
ECAD Model:
24-Pin Shroud, C-Grid, SL Series
Available Stock
4,600
Estimated Ship Time:7-9 working days
23+
78+$1.507
200+$1.485
1,200+$1.397
4,000+$1.221
- +
Ext. Price(USD):$117.54
MOQ:78
Mult:1
SPQ:1
Cap (Cover), Dust Micro Motor Encoders, 27.9mm × 27.9mm × 27.9mm
Available Stock
8,310
Estimated Ship Time:7-9 working days
17+
300+$0.407
700+$0.396
1,400+$0.385
2,800+$0.374
5,000+$0.3212
- +
Ext. Price(USD):$122.10
MOQ:300
Mult:1
SPQ:1
34-Pin Strain Relief
Available Stock
25,798
Estimated Ship Time:7-9 working days
20+
300+$0.407
700+$0.396
2,800+$0.385
15,000+$0.352
- +
Ext. Price(USD):$122.10
MOQ:300
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Cap (Cover), ePower Series
Available Stock
23
Estimated Ship Time:9-14 working days
1+$107.6112
10+$91.4695
25+$85.7477
50+$81.6597
100+$77.7682
- +
Ext. Price(USD):$107.61
MOQ:1
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Bracket Mount, Panel Mount
Available Stock
28
Estimated Ship Time:9-14 working days
2+$628.2738
10+$615.7058
50+$603.3921
100+$591.3242
500+$579.4977
- +
Ext. Price(USD):$1,256.54
MOQ:2
Mult:2
SPQ:1
787-0015-03
Available Stock
798
Estimated Ship Time:6-13 working days
1+$4.347
10+$3.608
- +
Ext. Price(USD):$17.38
MOQ:4
Mult:1
SPQ:1
003-1405-0001=JACK,SUB UG-89
Available Stock
29
Estimated Ship Time:9-14 working days
5+$238.518
10+$233.7466
20+$229.0723
50+$224.4907
100+$220.0009
- +
Ext. Price(USD):$1,192.59
MOQ:5
Mult:5
SPQ:1
3M
ECAD Model:
60-Pin Strain Relief D89 Series
Available Stock
1,000
Estimated Ship Time:9-14 working days
50+$0.5139
100+$0.4892
250+$0.4586
500+$0.4366
1,000+$0.4158
- +
Ext. Price(USD):$26.20
MOQ:51
Mult:1
SPQ:1
Cap (Cover), Strain Relief, 2-Pin, 9176 Series, PCB Mount, 8mm × 6.3mm × 5.55mm
Available Stock
1,376
Estimated Ship Time:9-14 working days
1+$0.991
10+$0.8365
1,000+$0.506
3,000+$0.4683
- +
Ext. Price(USD):$150.12
MOQ:269
Mult:1
SPQ:1
Molex
ECAD Model:
10pin Cable Holder Ribbon Cables, Wire Mount, 3.8mm H
Available Stock
7,000
Estimated Ship Time:7-9 working days
17+
321+$0.1815
4,000+$0.1738
7,000+$0.1672
- +
Ext. Price(USD):$58.26
MOQ:321
Mult:1
SPQ:1
20-Pin Cone Terminal Block, 53 Series, Board Mount, 100.89mm L
Available Stock
15
Estimated Ship Time:7-9 working days
12+
1+$177.969
2+$174.68
4+$171.38
7+$168.091
- +
Ext. Price(USD):$177.96
MOQ:1
Mult:1
SPQ:1
20-Pin Strain Relief, AMP-LATCH Series, 29.97mm L × 6.1mm H
Available Stock
2,840
Estimated Ship Time:5-12 working days
50+$1.2878
500+$1.2272
9,000+$0.4549
12,000+$0.4458
- +
Ext. Price(USD):$64.39
MOQ:50
Mult:1
SPQ:1
25 / PageGoto