Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
TE Connectivity Housing, MTA-100 Series
Available Stock
5,479
Estimated Ship Time:7-9 working days
17+
200+$0.583
500+$0.572
2,500+$0.506
5,000+$0.484
- +
Ext. Price(USD):$116.60
MOQ:200
Mult:1
SPQ:1
Panel Mount Frame, Panel Mount, 45.212mm (L) × 40.6mm (W)
Available Stock
860
Estimated Ship Time:6-13 working days
1+$15.4445
10+$12.096
504+$8.8452
1,008+$8.3808
- +
Ext. Price(USD):$15.44
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
Pull Tab 3000 Series 82.6mm × 82.6mm × 76.2mm
Available Stock
619
Estimated Ship Time:9-14 working days
10+$1.9634
25+$1.8403
1,000+$1.4183
3,000+$1.3126
- +
Ext. Price(USD):$27.48
MOQ:14
Mult:1
SPQ:1
EDAC
ECAD Model:
EDAC 570 Series 570-260-001 Wire Seal for Waterproof Connectors
Available Stock
3,070
Estimated Ship Time:5-10 working days
10+$0.1899
500+$0.1848
2,500+$0.1785
- +
Ext. Price(USD):$7.59
MOQ:40
Mult:10
Harwin
ECAD Model:
Shell 20-Pin Gecko Series Panel Mount
Available Stock
7
Estimated Ship Time:9-14 working days
1+$83.322
10+$70.8253
25+$66.3936
50+$63.2277
100+$60.2138
- +
Ext. Price(USD):$83.32
MOQ:1
Mult:1
SPQ:1
5-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
7,259
Estimated Ship Time:5-12 working days
500+$0.0759
2,500+$0.0639
100,000+$0.0536
150,000+$0.0535
- +
Ext. Price(USD):$37.95
MOQ:500
Mult:1
SPQ:10,000
Molex
ECAD Model:
12-Pin Shell CRC Series Panel Mount, Front Mount 40.4mm L x 19.6mm H
Available Stock
820
Estimated Ship Time:7-9 working days
20+
13+$9.174
35+$9.009
200+$7.436
500+$7.227
- +
Ext. Price(USD):$119.26
MOQ:13
Mult:1
SPQ:1
Molex
ECAD Model:
20-Pin Shroud C-Grid SL Series, Wire Mount, 67.15mm L × 8.12mm H
Available Stock
500
Estimated Ship Time:7-9 working days
23+
89+$1.32
250+$1.298
450+$1.276
- +
Ext. Price(USD):$117.48
MOQ:89
Mult:1
SPQ:1
17-Pin Terminal Position Assurance (TPA) Economy Power Housings, SMD
Available Stock
724
Estimated Ship Time:6-13 working days
25+$0.3347
100+$0.2783
2,800+$0.176
10,000+$0.1598
- +
Ext. Price(USD):$14.05
MOQ:42
Mult:1
SPQ:1
TE Connectivity DTM Tail Cap, High Protection, Allows Corrugated Tube Insertion, 180° & 90° Versions
Available Stock
4,719
Estimated Ship Time:6-13 working days
1+$2.093
10+$1.8745
1,000+$1.3392
2,500+$1.2312
- +
Ext. Price(USD):$14.65
MOQ:7
Mult:1
SPQ:1
Amphenol
ECAD Model:
Amphenol Industrial Cable Connector Boot, AT Series, Receptacle
Available Stock
3,648
Estimated Ship Time:6-13 working days
10+$0.7855
25+$0.7314
1,200+$0.5584
5,100+$0.5227
- +
Ext. Price(USD):$14.13
MOQ:18
Mult:1
SPQ:1
4-Pin Cap (Cover) EM Series
Available Stock
20
Estimated Ship Time:9-14 working days
1+$15.3468
20+$12.4168
500+$9.8951
1,000+$9.4234
- +
Ext. Price(USD):$30.69
MOQ:2
Mult:1
SPQ:1
30-Pin Splash Guard SHS Series Receptacle
Available Stock
214
Estimated Ship Time:5-12 working days
10+$3.427
50+$3.124
1,050+$2.6643
2,520+$2.5894
- +
Ext. Price(USD):$34.27
MOQ:10
Mult:1
SPQ:105
Heavy Duty Sealed Connector Clamps for Installation; Fits All Connector Housing Sizes; No Hardware or Tools Required
Available Stock
406
Estimated Ship Time:6-13 working days
10+$0.6337
25+$0.5704
5,000+$0.3596
10,000+$0.3532
- +
Ext. Price(USD):$14.57
MOQ:23
Mult:1
SPQ:1
3M
ECAD Model:
20-Pin Strain Relief D89 Series 30mm (L)
Available Stock
976
Estimated Ship Time:6-13 working days
10+$0.613
25+$0.5474
5,000+$0.3629
10,000+$0.3564
- +
Ext. Price(USD):$14.23
MOQ:26
Mult:1
SPQ:1
Molex
ECAD Model:
44-Pin Shroud C-Grid SL Series Clip Mount 60.09mm L × 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$12.1684
100+$11.9249
500+$11.6864
1,000+$11.4527
5,000+$11.2236
- +
Ext. Price(USD):$608.42
MOQ:50
Mult:50
SPQ:1
Mounting Base for DMC-MD Inserts, 1-Pin
Available Stock
198
Estimated Ship Time:9-14 working days
1+$39.9492
10+$33.9574
100+$28.8671
250+$27.062
- +
Ext. Price(USD):$39.94
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief, Stress Clamp, 3448 Series, For 3000 Series
Available Stock
990
Estimated Ship Time:5-10 working days
10+$0.9088
- +
Ext. Price(USD):$9.08
MOQ:10
Mult:10
26-Pin Cap (Cover) AMPMODU Mod IV Series
Available Stock
744
Estimated Ship Time:6-13 working days
1+$2.852
10+$2.4955
2,800+$1.4256
5,600+$1.3716
- +
Ext. Price(USD):$14.26
MOQ:5
Mult:1
SPQ:1
Bus Bar, MTC Series
Available Stock
52
Estimated Ship Time:5-12 working days
1+$85.2208
5+$81.048
50+$75.1461
100+$74.044
- +
Ext. Price(USD):$85.22
MOQ:1
Mult:1
SPQ:1
Amphenol Industrial PCB Housing, AIPXE Series, Thermoplastic, 82.55 × 101.6 × 19mm, 24-Pin
Available Stock
335
Estimated Ship Time:6-13 working days
1+$30.47
10+$26.2872
25+$25.1748
70+$24.0084
280+$22.8636
- +
Ext. Price(USD):$30.47
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Position Assurance (TPA) 3-Pin L1NK 396 207458 7.6mm H
Available Stock
47,975
Estimated Ship Time:7-9 working days
19+
1,640+$0.0715
4,100+$0.0704
8,200+$0.0693
12,000+$0.066
30,000+$0.0583
- +
Ext. Price(USD):$117.26
MOQ:1,640
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin Solder Terminal, Board-to-Board, Board Mount, 7.5mm L × 7mm H
Available Stock
6,191
Estimated Ship Time:7-9 working days
17+
1,112+$0.0528
- +
Ext. Price(USD):$58.71
MOQ:1,112
Mult:1
SPQ:1
1pin Cap (Cover), Strain Relief 9176 Series
Available Stock
51,136
Estimated Ship Time:6-13 working days
25+$0.2844
100+$0.2604
5,000+$0.1898
10,000+$0.1752
- +
Ext. Price(USD):$26.56
MOQ:102
Mult:1
SPQ:1
Ejector Latch Long CW Protected Headers
Available Stock
1,200
Estimated Ship Time:5-12 working days
100+$0.7773
300+$0.7205
10,000+$0.6324
15,000+$0.6313
- +
Ext. Price(USD):$77.73
MOQ:100
Mult:100
SPQ:100
25 / PageGoto