Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
34-Pin Strain Relief, Quickie™ Series
Available Stock
1,495
Estimated Ship Time:7-9 working days
20+
278+$0.396
16,000+$0.396
- +
Ext. Price(USD):$110.08
MOQ:278
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
106
Estimated Ship Time:7-9 working days
20+
7+$16.39
17+$16.093
34+$15.785
68+$15.488
- +
Ext. Price(USD):$114.73
MOQ:7
Mult:1
SPQ:1
Ferrule
Available Stock
208
Estimated Ship Time:7-9 working days
15+
40+$2.838
100+$2.783
200+$2.739
- +
Ext. Price(USD):$113.52
MOQ:40
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief Clamp, For 2500 Series
Available Stock
190
Estimated Ship Time:5-10 working days
10+$1.2797
250+$1.2402
750+$1.2032
2,000+$1.1778
4,000+$1.1472
- +
Ext. Price(USD):$12.79
MOQ:10
Mult:10
Molex
ECAD Model:
16-Pin Retainer, MicroClasp Series
Available Stock
23,000
Estimated Ship Time:9-14 working days
50+$0.2808
100+$0.2673
1,000+$0.2271
2,500+$0.2129
- +
Ext. Price(USD):$26.11
MOQ:93
Mult:1
SPQ:1
3pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
8
Estimated Ship Time:9-14 working days
1+$19.6236
10+$16.6806
25+$15.6358
50+$14.8895
100+$14.37
- +
Ext. Price(USD):$39.24
MOQ:2
Mult:1
SPQ:1
Backshell
Available Stock
7
Estimated Ship Time:9-14 working days
1+$13,906.404
10+$13,628.277
50+$13,355.7118
100+$13,088.5975
500+$12,826.8256
- +
Ext. Price(USD):$13,906.40
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot, ATM Series
Available Stock
455
Estimated Ship Time:6-13 working days
10+$1.288
25+$1.1466
1,200+$0.7106
5,200+$0.7096
- +
Ext. Price(USD):$14.16
MOQ:11
Mult:1
SPQ:1
Amphenol
ECAD Model:
4-Pin Boot AT Series™
Available Stock
286
Estimated Ship Time:5-10 working days
1+$1.1854
10+$1.0873
25+$0.9878
- +
Ext. Price(USD):$7.11
MOQ:6
Mult:1
24-Pin TPA Economy Power Housing, Panel Mount, 11.43mm H
Available Stock
13,924
Estimated Ship Time:7-9 working days
17+
1,000+$0.1144
2,500+$0.1133
4,900+$0.1111
9,700+$0.1089
- +
Ext. Price(USD):$114.40
MOQ:1,000
Mult:1
SPQ:1
Pancon
ECAD Model:
Strain Relief Bracket, 64-Way
Available Stock
3,228
Estimated Ship Time:5-12 working days
25+$1.7365
100+$1.54
5,000+$1.1663
7,500+$1.1342
- +
Ext. Price(USD):$43.41
MOQ:25
Mult:1
SPQ:1
24-Pin Holder, AMPMODU MT Series, Bracket Mount, 28.3mm × 8.5mm × 6.9mm
Available Stock
12,000
Estimated Ship Time:7-9 working days
13+
400+$0.2849
1,000+$0.2794
8,000+$0.2629
10,000+$0.2332
- +
Ext. Price(USD):$113.96
MOQ:400
Mult:1
SPQ:1
10-Pin Strain Relief AMP-LATCH Series 17.07mm L × 14.73mm H
Available Stock
22,649
Estimated Ship Time:5-12 working days
50+$0.5813
250+$0.5057
7,500+$0.4477
10,000+$0.4466
- +
Ext. Price(USD):$30.22
MOQ:52
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Shell, CRC Series
Available Stock
10,212
Estimated Ship Time:7-9 working days
20+
12+$9.867
30+$9.691
4,000+$6.798
10,000+$6.38
- +
Ext. Price(USD):$118.40
MOQ:12
Mult:1
SPQ:1
40-Pin Cap (Cover) Micro Quadlok Series, 61.7mm L × 35mm H
Available Stock
578
Estimated Ship Time:6-13 working days
1+$3.1395
10+$2.6795
1,000+$1.7388
2,500+$1.6956
- +
Ext. Price(USD):$15.69
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
30pin Shroud C-Grid SL Series Clip Mount Free Hanging 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Guide Pin EM Series
Available Stock
287
Estimated Ship Time:6-13 working days
1+$2.2425
10+$1.909
1,000+$1.2096
2,500+$1.1664
- +
Ext. Price(USD):$15.69
MOQ:7
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
99
Estimated Ship Time:9-14 working days
1+$55.0152
10+$46.7651
100+$39.7564
250+$37.2711
- +
Ext. Price(USD):$55.01
MOQ:1
Mult:1
SPQ:1
Shell, RPRM Series
Available Stock
145
Estimated Ship Time:9-14 working days
1+$26.3844
10+$22.4251
25+$21.0211
50+$20.0178
100+$19.6558
- +
Ext. Price(USD):$26.38
MOQ:1
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
99
Estimated Ship Time:5-12 working days
1+$119.141
5+$115.6135
75+$42.8642
100+$41.9975
- +
Ext. Price(USD):$119.14
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
32-Pin Cap (Cover) CMC Connectors Wire Mount 33.5mm H
Available Stock
2,099
Estimated Ship Time:7-9 working days
12+
305+$0.1914
- +
Ext. Price(USD):$58.37
MOQ:305
Mult:1
SPQ:1
60-Pin Cap Cover
Available Stock
67
Estimated Ship Time:9-14 working days
1+$5.9832
10+$5.0868
1,024+$3.669
2,528+$3.4426
- +
Ext. Price(USD):$29.91
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Shroud C-Grid SL Series Wire Mount 32.61mm L × 27.56mm H
Available Stock
4,600
Estimated Ship Time:7-9 working days
23+
105+$1.122
300+$1.1
550+$1.089
900+$1.034
2,000+$0.913
- +
Ext. Price(USD):$117.81
MOQ:105
Mult:1
SPQ:1
Amphenol
ECAD Model:
Boot, 3pin, AT Series™
Available Stock
600
Estimated Ship Time:5-12 working days
300+$0.653
600+$0.5875
10,200+$0.4627
15,000+$0.4569
- +
Ext. Price(USD):$195.90
MOQ:300
Mult:300
SPQ:300
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
29
Estimated Ship Time:9-14 working days
10+$164.0228
100+$160.7428
200+$157.5279
500+$154.3774
1,000+$151.2898
- +
Ext. Price(USD):$1,640.22
MOQ:10
Mult:10
SPQ:1
25 / PageGoto