Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
18-Pin Strain Relief Omnimate RSV Series
Available Stock
40
Estimated Ship Time:9-14 working days
10+$2.0887
25+$1.9574
50+$1.8636
100+$1.7747
250+$1.6635
- +
Ext. Price(USD):$27.15
MOQ:13
Mult:1
SPQ:1
Shell 45-Pin Sumicon 1600 Series Connector 60mm
Available Stock
23
Estimated Ship Time:6-13 working days
1+$25.8405
10+$21.0492
100+$17.5284
250+$16.8264
- +
Ext. Price(USD):$25.84
MOQ:1
Mult:1
SPQ:1
3-Pin Retainer Clip DF1E Series Bracket Mount
Available Stock
1,640
Estimated Ship Time:6-13 working days
25+$0.4106
100+$0.3531
5,000+$0.2322
10,000+$0.2182
- +
Ext. Price(USD):$14.37
MOQ:35
Mult:1
SPQ:1
Frame, PQ50 Series
Available Stock
20
Estimated Ship Time:9-14 working days
1+$51.7752
20+$41.9072
100+$37.412
260+$34.9763
- +
Ext. Price(USD):$51.77
MOQ:1
Mult:1
SPQ:1
26-Pin Strain Relief Wire Mount
Available Stock
177
Estimated Ship Time:9-14 working days
25+$0.9072
50+$0.8636
1,080+$0.6951
2,520+$0.6548
- +
Ext. Price(USD):$26.30
MOQ:29
Mult:1
SPQ:1
20-Pin Cap (Cover) AMPMODU Mod IV Series
Available Stock
6,057
Estimated Ship Time:7-9 working days
10+
50+$2.354
150+$2.31
2,000+$2.024
5,000+$1.837
- +
Ext. Price(USD):$117.70
MOQ:50
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Terminal Position Assurance (TPA) L1NK 250 Series Fixed Mount
Available Stock
29,045
Estimated Ship Time:7-9 working days
19+
1,563+$0.0748
4,000+$0.0737
7,900+$0.0726
15,700+$0.0715
20,000+$0.0693
- +
Ext. Price(USD):$116.91
MOQ:1,563
Mult:1
SPQ:1
Molex
ECAD Model:
5-Pin Retainer, 49517 Series
Available Stock
20,000
Estimated Ship Time:7-9 working days
12+
500+$0.1166
1,000+$0.1056
- +
Ext. Price(USD):$58.30
MOQ:500
Mult:1
SPQ:1
Molex
ECAD Model:
Mounting Clip 2481 Series, Clip Mount
Available Stock
51
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
9pin Cable Tie Backshell, 369 Series
Available Stock
4,274
Estimated Ship Time:6-13 working days
1+$7.567
10+$6.468
500+$4.9248
1,000+$4.698
- +
Ext. Price(USD):$15.13
MOQ:2
Mult:1
SPQ:1
TE Connectivity Automotive Connector TPA Lock Plate, EconoSeal III Series, 3-Way
Available Stock
14,441
Estimated Ship Time:7-9 working days
15+
350+$0.3278
850+$0.3223
1,700+$0.3168
3,400+$0.3113
- +
Ext. Price(USD):$114.73
MOQ:350
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
413
Estimated Ship Time:6-13 working days
10+$0.6831
25+$0.6095
5,000+$0.3953
10,000+$0.3866
- +
Ext. Price(USD):$14.34
MOQ:21
Mult:1
SPQ:1
Molex
ECAD Model:
TPA FOR L1 NK 250 - 1X3 Ckt
Available Stock
40,101
Estimated Ship Time:7-9 working days
19+
1,516+$0.077
3,800+$0.0759
7,600+$0.0737
15,200+$0.0726
18,000+$0.0715
- +
Ext. Price(USD):$116.73
MOQ:1,516
Mult:1
SPQ:1
26-Pin Cap (Cover), Front AMPMODU MT Series, 33.02mm L
Available Stock
1,300
Estimated Ship Time:7-9 working days
21+
900+$0.1276
- +
Ext. Price(USD):$114.84
MOQ:900
Mult:1
SPQ:1
10-Pin Cap (Cover) DF1 Series
Available Stock
171
Estimated Ship Time:9-14 working days
100+$0.2297
- +
Ext. Price(USD):$26.18
MOQ:114
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Backshell Mega-Fit Receptacles Free Hanging
Available Stock
2,178
Estimated Ship Time:6-13 working days
10+$1.2535
26+$1.155
2,500+$0.6664
5,000+$0.6556
- +
Ext. Price(USD):$15.04
MOQ:12
Mult:1
SPQ:1
3-Pin Terminal Position Assurance (TPA) Grace Inertia Connectors
Available Stock
18,721
Estimated Ship Time:6-13 working days
25+$0.0828
3,000+$0.0724
6,000+$0.0702
12,000+$0.054
- +
Ext. Price(USD):$14.07
MOQ:170
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Retention Key Mini-Fit Sr Series
Available Stock
2,600
Estimated Ship Time:7-10 working days
24+
167+$0.704
450+$0.693
850+$0.671
1,500+$0.649
- +
Ext. Price(USD):$117.56
MOQ:167
Mult:1
SPQ:1
Strain Relief 14-Pin
Available Stock
10,596
Estimated Ship Time:9-14 working days
288+$0.0672
576+$0.0639
1,008+$0.0614
2,592+$0.0575
- +
Ext. Price(USD):$26.00
MOQ:387
Mult:1
SPQ:1
Connector Cap (Cover), Front, AMPMODU MT Series, 16-Pin
Available Stock
359
Estimated Ship Time:5-12 working days
25+$1.8331
100+$1.6324
5,000+$1.0411
7,500+$1.0122
- +
Ext. Price(USD):$45.82
MOQ:25
Mult:1
SPQ:1
4pin Retainer Clip DF1E Series Fixed Mount
Available Stock
3,712
Estimated Ship Time:6-13 working days
25+$0.3427
100+$0.3113
5,000+$0.2322
10,000+$0.2182
- +
Ext. Price(USD):$14.05
MOQ:41
Mult:1
SPQ:1
Molex
ECAD Model:
5pin Cable Holder Ribbon Cables wire mounting 3.8mm(height)
Available Stock
38,130
Estimated Ship Time:5-12 working days
4,000+$0.02
19,000+$0.018
40,000+$0.0165
- +
Ext. Price(USD):$80.00
MOQ:4,000
Mult:1
SPQ:1
CviLux
ECAD Model:
16-Pin Strain Relief, CA21 Series
Available Stock
2,005
Estimated Ship Time:9-14 working days
1,000+$0.0219
2,500+$0.0205
- +
Ext. Price(USD):$26.01
MOQ:1,188
Mult:1
SPQ:1
Backshell
Available Stock
25
Estimated Ship Time:7-9 working days
19+
1+$360.888
- +
Ext. Price(USD):$360.88
MOQ:1
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
50
Estimated Ship Time:5-12 working days
1+$45.7125
5+$41.206
100+$37.3751
250+$29.7353
- +
Ext. Price(USD):$45.71
MOQ:1
Mult:1
SPQ:1
25 / PageGoto