Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
ECAD Model:
2-Pin Wedge for Pins, ATP Series™
Available Stock
816
Estimated Ship Time:6-13 working days
25+$0.4232
250+$0.3905
5,200+$0.2441
10,000+$0.2376
- +
Ext. Price(USD):$14.38
MOQ:34
Mult:1
SPQ:1
Molex
ECAD Model:
26-Pin Clip Mi II 52484 Series Bracket Mount
Available Stock
813
Estimated Ship Time:5-12 working days
725+$0.096
8,000+$0.0873
16,000+$0.084
41,000+$0.0819
128,000+$0.0785
- +
Ext. Price(USD):$69.60
MOQ:725
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
5+$250.7544
10+$245.7389
50+$240.8242
100+$236.0078
500+$231.2876
- +
Ext. Price(USD):$1,253.77
MOQ:5
Mult:5
SPQ:1
Amphenol
ECAD Model:
2pin Wedge for Pins ATM Series Edge Mount
Available Stock
954
Estimated Ship Time:6-13 working days
25+$0.2565
100+$0.2346
5,000+$0.1663
10,000+$0.162
- +
Ext. Price(USD):$14.10
MOQ:55
Mult:1
SPQ:1
3M
ECAD Model:
34-Pin Carrier, Free Hanging 47.24mm (L) × 19.73mm (H)
Available Stock
15
Estimated Ship Time:9-14 working days
1+$34.6788
10+$29.4732
- +
Ext. Price(USD):$34.67
MOQ:1
Mult:1
SPQ:1
2.5mm Sealed Connector: TPAs, Signal Double Lock Connectors
Available Stock
13,368
Estimated Ship Time:6-13 working days
25+$0.2174
100+$0.207
2,500+$0.1523
8,000+$0.1469
- +
Ext. Price(USD):$14.13
MOQ:65
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Shroud C-Grid SL Series Connector
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
40-Pin Shell DF80 Series Connector
Available Stock
632
Estimated Ship Time:9-14 working days
10+$1.8727
25+$1.7552
250+$1.4917
500+$1.4205
- +
Ext. Price(USD):$26.21
MOQ:14
Mult:1
SPQ:1
3M
ECAD Model:
16-Pin Strain Relief 3000 Series Panel Mount 24.9mm × 6.1mm × 6.1mm
Available Stock
857
Estimated Ship Time:6-13 working days
10+$0.705
25+$0.6463
1,000+$0.4914
3,000+$0.4536
- +
Ext. Price(USD):$14.10
MOQ:20
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Polarized Pin, For 2139 KK Crimp Terminal, 2145 KK PC Board Connector
Available Stock
16,000
Estimated Ship Time:7-9 working days
26+
4,000+$0.0297
20,000+$0.0275
200,000+$0.0231
400,000+$0.022
- +
Ext. Price(USD):$118.80
MOQ:4,000
Mult:1
SPQ:1
Connector, 31-Pin, Secondary Lock
Available Stock
5,967
Estimated Ship Time:7-9 working days
18+
150+$0.99
300+$0.968
600+$0.957
1,200+$0.935
- +
Ext. Price(USD):$148.50
MOQ:150
Mult:1
SPQ:1
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
1,278
Estimated Ship Time:6-13 working days
10+$1.242
25+$0.7383
100+$0.704
500+$0.5886
1,000+$0.5864
- +
Ext. Price(USD):$14.90
MOQ:12
Mult:1
SPQ:1
Amphenol
ECAD Model:
Connector 12-Pin Boot ATM Series
Available Stock
2,327
Estimated Ship Time:6-13 working days
1+$1.863
10+$1.6445
25+$1.441
100+$1.134
300+$1.0908
- +
Ext. Price(USD):$14.90
MOQ:8
Mult:1
SPQ:1
2-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
3,178
Estimated Ship Time:6-13 working days
25+$0.1955
100+$0.1737
6,000+$0.0983
10,000+$0.0918
- +
Ext. Price(USD):$14.07
MOQ:72
Mult:1
SPQ:1
AMPSEAL 16 Connector Tail, High Protection, Direct or 90° Wire Exit, Fits Corrugated or Sheathed Cable
Available Stock
32
Estimated Ship Time:9-14 working days
10+$2.119
25+$1.9859
1,000+$1.5307
3,000+$1.4166
- +
Ext. Price(USD):$27.54
MOQ:13
Mult:1
SPQ:1
Mounting Bracket, Adhesive Mount, 59mm × 29.8mm × 15.3mm
Available Stock
1,478
Estimated Ship Time:6-13 working days
10+$0.7268
25+$0.6486
6,000+$0.4558
12,000+$0.419
- +
Ext. Price(USD):$14.53
MOQ:20
Mult:1
SPQ:1
50-Pin Cap (Cover), Front AMPMODU MT Series 63.5mm L
Available Stock
2,112
Estimated Ship Time:7-10 working days
24+
30+$3.927
75+$3.85
500+$3.641
1,000+$3.278
- +
Ext. Price(USD):$117.81
MOQ:30
Mult:1
SPQ:1
Cable Seal Sealed Mount Wire Mount
Available Stock
1,118
Estimated Ship Time:6-13 working days
1+$8.6365
10+$7.326
500+$5.562
1,200+$5.3784
- +
Ext. Price(USD):$17.27
MOQ:2
Mult:1
SPQ:1
34-Pin Terminal Position Assurance (TPA) Economy Power Housings TH
Available Stock
23,377
Estimated Ship Time:7-9 working days
24+
3,000+$0.0759
6,000+$0.0748
9,000+$0.0737
15,000+$0.0715
- +
Ext. Price(USD):$227.70
MOQ:3,000
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
145
Estimated Ship Time:6-13 working days
10+$1.1615
25+$1.0339
400+$0.7063
1,200+$0.6361
- +
Ext. Price(USD):$15.09
MOQ:13
Mult:1
SPQ:1
3M
ECAD Model:
Hardware Kit 3000 Series, 12.7mm L
Available Stock
738
Estimated Ship Time:9-14 working days
10+$2.0174
25+$1.8904
1,000+$1.4569
2,500+$1.3658
- +
Ext. Price(USD):$26.22
MOQ:13
Mult:1
SPQ:1
58-Pin Secondary Lock
Available Stock
8,240
Estimated Ship Time:6-13 working days
10+$0.8717
25+$0.7947
2,500+$0.5551
5,000+$0.553
- +
Ext. Price(USD):$14.81
MOQ:17
Mult:1
SPQ:1
14-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
499
Estimated Ship Time:6-13 working days
1+$2.8405
10+$2.576
2,500+$1.5336
5,000+$1.512
- +
Ext. Price(USD):$14.20
MOQ:5
Mult:1
SPQ:1
180° Polyvinyl Chloride
Available Stock
5,913
Estimated Ship Time:6-13 working days
10+$1.0178
25+$0.8154
3,000+$0.6026
5,400+$0.5962
- +
Ext. Price(USD):$14.24
MOQ:14
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Stress Relief, Stress Elimination Connector, QF 50 Series, For 5320/90170/90635 Series
Available Stock
9,863
Estimated Ship Time:7-9 working days
16+
1,163+$0.0506
- +
Ext. Price(USD):$58.84
MOQ:1,163
Mult:1
SPQ:1
25 / PageGoto