Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
16-Pin Strain Relief AMP-LATCH Series
Available Stock
9,250
Estimated Ship Time:7-9 working days
18+
100+$1.155
250+$1.133
500+$1.111
1,000+$1.067
5,000+$0.99
- +
Ext. Price(USD):$115.50
MOQ:100
Mult:50
SPQ:50
1-Pin Wire Seal
Available Stock
38,405
Estimated Ship Time:6-13 working days
100+$0.0955
250+$0.0851
5,000+$0.068
10,000+$0.0659
- +
Ext. Price(USD):$14.03
MOQ:147
Mult:1
SPQ:1
Housing Module, Wire Mount, 28.45mm L × 24.36mm H
Available Stock
141
Estimated Ship Time:6-13 working days
1+$2,113.8516
- +
Ext. Price(USD):$2,113.85
MOQ:1
Mult:1
SPQ:1
1-Pin Mounting Base DMC-MD Inserts, Bracket Mount, TH
Available Stock
202
Estimated Ship Time:6-13 working days
1+$41.833
10+$34.8516
100+$30.24
250+$28.836
- +
Ext. Price(USD):$41.83
MOQ:1
Mult:1
SPQ:1
Deutsch Wedge Lock, DT Series, 2-Pos
Available Stock
3,498
Estimated Ship Time:7-10 working days
23+
24+$4.587
2,400+$4.587
- +
Ext. Price(USD):$110.08
MOQ:24
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
2-Pin Wedgelock IT Series
Available Stock
232,247
Estimated Ship Time:7-9 working days
22+
1,100+$0.1034
5,400+$0.099
10,700+$0.0946
53,200+$0.0902
159,600+$0.0869
- +
Ext. Price(USD):$113.74
MOQ:1,100
Mult:1
SPQ:1
Amphenol
ECAD Model:
Automotive Connectors 24 Position Boot Black (For use on both Plug and Receptacle)
Available Stock
160
Estimated Ship Time:7-9 working days
22+
61+$1.815
- +
Ext. Price(USD):$110.71
MOQ:61
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
827
Estimated Ship Time:6-13 working days
1+$34.353
10+$29.97
100+$26.9892
250+$25.5852
- +
Ext. Price(USD):$34.35
MOQ:1
Mult:1
SPQ:1
6-Pin Strain Relief Minitek™
Available Stock
770
Estimated Ship Time:7-9 working days
15+
348+$0.3168
17,710+$0.3168
- +
Ext. Price(USD):$110.24
MOQ:348
Mult:1
SPQ:1
Strain Relief Hsg, 24P
Available Stock
250
Estimated Ship Time:7-9 working days
13+
45+$2.552
150+$2.508
250+$2.453
- +
Ext. Price(USD):$114.84
MOQ:45
Mult:1
SPQ:1
Base Ground Bar 50-Pin FI-JW Series Bracket Mount
Available Stock
152
Estimated Ship Time:9-14 working days
10+$2.3965
25+$2.246
50+$2.1386
100+$2.0366
- +
Ext. Price(USD):$26.36
MOQ:11
Mult:1
SPQ:1
TE Connectivity Auto Connector TPA Lock Plate, EconoSeal III Series, 13 Pos
Available Stock
55
Estimated Ship Time:5-10 working days
5+$0.9968
125+$0.9738
250+$0.956
- +
Ext. Price(USD):$9.96
MOQ:10
Mult:5
Molex
ECAD Model:
9-Pin Shroud C-Grid SL Series, Wire Mount, 39.21mm L × 8.12mm H
Available Stock
315
Estimated Ship Time:7-9 working days
14+
115+$0.957
700+$0.957
1,400+$0.902
4,000+$0.792
10,000+$0.77
- +
Ext. Price(USD):$110.05
MOQ:115
Mult:1
SPQ:1
1-Pin Adapter, Mounting
Available Stock
2,348
Estimated Ship Time:5-12 working days
5+$9.3265
100+$6.2702
1,500+$5.7352
2,000+$5.7245
- +
Ext. Price(USD):$46.63
MOQ:5
Mult:1
SPQ:200
Coding Key DMC-MD Inserts
Available Stock
788
Estimated Ship Time:7-9 working days
21+
20+$6.908
40+$6.787
80+$6.666
200+$6.545
- +
Ext. Price(USD):$138.16
MOQ:20
Mult:1
SPQ:1
JAE
ECAD Model:
68-Pin Cap (Cover) MX60A Series
Available Stock
98
Estimated Ship Time:9-14 working days
1+$4.8168
10+$4.0964
1,000+$2.9598
2,520+$2.7731
- +
Ext. Price(USD):$28.90
MOQ:6
Mult:1
SPQ:1
3M
ECAD Model:
40-Pin Strain Relief D89 Series
Available Stock
136
Estimated Ship Time:9-14 working days
25+$0.6495
50+$0.5139
1,000+$0.4158
2,500+$0.3897
- +
Ext. Price(USD):$26.20
MOQ:51
Mult:1
SPQ:1
Molex
ECAD Model:
Housing Connector
Available Stock
6,196
Estimated Ship Time:7-9 working days
17+
250+$0.2739
550+$0.2541
1,100+$0.2475
5,000+$0.2255
- +
Ext. Price(USD):$68.47
MOQ:250
Mult:1
SPQ:1
14-Pin Cap (Cover) AMPMODU MT Series, 17.78mm L
Available Stock
27,328
Estimated Ship Time:5-12 working days
50+$0.6279
250+$0.5808
7,500+$0.5511
10,000+$0.5489
- +
Ext. Price(USD):$31.39
MOQ:50
Mult:1
SPQ:1
2pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
10
Estimated Ship Time:9-14 working days
1+$16.8912
10+$14.3521
500+$10.8914
1,000+$10.3722
- +
Ext. Price(USD):$33.78
MOQ:2
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve Plug, Plastic, For 1-Wire Cable
Available Stock
10,366
Estimated Ship Time:6-13 working days
1+$2.139
10+$1.7365
1,000+$1.2528
2,500+$1.242
- +
Ext. Price(USD):$14.97
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
3pin Cable Holder for Ribbon Cables, Wire Mount, 3.8mm(H)
Available Stock
42,528
Estimated Ship Time:7-9 working days
17+
3,000+$0.0253
13,000+$0.0242
26,000+$0.0224
- +
Ext. Price(USD):$75.90
MOQ:3,000
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts
Available Stock
28
Estimated Ship Time:9-14 working days
2+$925.506
10+$906.998
50+$888.8579
100+$871.0808
500+$853.6592
- +
Ext. Price(USD):$1,851.01
MOQ:2
Mult:2
SPQ:1
Molex
ECAD Model:
Molex Connector Retainer, For 172952, Low Halogen Micro-Fit TPA Housing
Available Stock
150
Estimated Ship Time:5-10 working days
10+$0.2549
100+$0.2473
250+$0.2422
500+$0.2294
1,000+$0.2192
- +
Ext. Price(USD):$7.64
MOQ:30
Mult:10
Amphenol
ECAD Model:
2-Pin Wedge for Pins, ATP Series™
Available Stock
816
Estimated Ship Time:6-13 working days
25+$0.4232
250+$0.3905
5,200+$0.2441
10,000+$0.2376
- +
Ext. Price(USD):$14.38
MOQ:34
Mult:1
SPQ:1
25 / PageGoto