Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
TE Connectivity Shield, MTE Series
Available Stock
1,263
Estimated Ship Time:6-13 working days
1+$3.6225
10+$2.959
250+$2.4732
500+$2.4624
- +
Ext. Price(USD):$14.49
MOQ:4
Mult:1
SPQ:1
PWR VERSA-LOCK TPA, 1X2
Available Stock
4,964
Estimated Ship Time:9-14 working days
100+$0.1697
250+$0.159
900+$0.1452
1,800+$0.1383
2,700+$0.1344
- +
Ext. Price(USD):$26.13
MOQ:154
Mult:1
SPQ:1
Molex
ECAD Model:
DITTO POSITIVE LOCK TPA 1X3 V-0 HT
Available Stock
35,190
Estimated Ship Time:7-9 working days
19+
650+$0.0924
750+$0.0847
3,700+$0.0836
7,400+$0.0825
13,200+$0.0781
- +
Ext. Price(USD):$60.06
MOQ:650
Mult:1
SPQ:1
3pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
10
Estimated Ship Time:9-14 working days
1+$12.69
10+$10.7806
- +
Ext. Price(USD):$38.07
MOQ:3
Mult:1
SPQ:1
Ejector Latch, AMP-LATCH Series
Available Stock
11,802
Estimated Ship Time:7-9 working days
21+
450+$0.2706
1,100+$0.2651
5,000+$0.231
10,000+$0.2244
- +
Ext. Price(USD):$121.77
MOQ:450
Mult:1
SPQ:1
Molex
ECAD Model:
42-Pin Shroud, C-Grid SL Series, Clip Mount, Free Hanging, 57.55mm L × 19.05mm H
Available Stock
5,357
Estimated Ship Time:7-9 working days
19+
47+$2.53
150+$2.486
1,600+$2.057
4,000+$1.991
- +
Ext. Price(USD):$118.91
MOQ:47
Mult:1
SPQ:1
Automotive Connector 2 POS, 1 ROW, Blue Peripheral Seal
Available Stock
559
Estimated Ship Time:6-13 working days
1+$3.0015
10+$2.7255
2,500+$1.5876
5,000+$1.4904
- +
Ext. Price(USD):$15.00
MOQ:5
Mult:1
SPQ:1
JAE
ECAD Model:
Polarizing Device (Key, Plug, Post) MX80 Series
Available Stock
425
Estimated Ship Time:9-14 working days
1+$0.728
10+$0.6188
1,000+$0.3709
2,500+$0.3476
- +
Ext. Price(USD):$26.12
MOQ:57
Mult:1
SPQ:1
TE Connectivity Stress Relief, Universal MATE-N-LOK Series, For MATE-N-LOK Series
Available Stock
219
Estimated Ship Time:7-10 working days
24+
145+$0.759
7,500+$0.759
10,000+$0.726
25,000+$0.693
100,000+$0.649
- +
Ext. Price(USD):$110.05
MOQ:145
Mult:1
SPQ:1
JAE
ECAD Model:
Polarizing Device (Key, Plug, Post), MX60A Series
Available Stock
44,773
Estimated Ship Time:9-14 working days
100+$0.1252
250+$0.1173
500+$0.1117
1,000+$0.1064
2,500+$0.0997
- +
Ext. Price(USD):$26.04
MOQ:208
Mult:1
SPQ:1
3-Pin Shroud Mini-PV™ Series
Available Stock
965
Estimated Ship Time:6-13 working days
10+$0.9488
25+$0.8671
1,000+$0.5983
5,000+$0.4709
- +
Ext. Price(USD):$14.23
MOQ:15
Mult:1
SPQ:1
17-Pin Cap (Cover), Strain Relief, MTA-156 Series, 67.36mm L × 11.18mm H
Available Stock
1,750
Estimated Ship Time:6-13 working days
10+$0.7326
25+$0.6705
6,000+$0.3899
10,000+$0.3823
- +
Ext. Price(USD):$14.65
MOQ:20
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Shell 50-Pin CRC Series Panel Mount
Available Stock
224
Estimated Ship Time:6-13 working days
1+$21.022
10+$18.1332
25+$17.4204
60+$17.172
- +
Ext. Price(USD):$21.02
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
20-Pin Strain Relief, 3000 Series, 28.4mm L × 6.1mm H
Available Stock
78
Estimated Ship Time:6-13 working days
1+$3.0475
10+$2.5645
1,000+$1.7496
2,500+$1.6416
- +
Ext. Price(USD):$15.23
MOQ:5
Mult:1
SPQ:1
54-Pin Cap (Cover), Locking Wire Mount
Available Stock
683
Estimated Ship Time:6-13 working days
1+$2.898
10+$2.714
1,000+$1.9224
2,500+$1.8576
- +
Ext. Price(USD):$14.49
MOQ:5
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Boot, ATM Series
Available Stock
798
Estimated Ship Time:6-13 working days
10+$1.0051
25+$0.9269
2,800+$0.5303
5,200+$0.526
- +
Ext. Price(USD):$14.07
MOQ:14
Mult:1
SPQ:1
Clip DT Series Receptacles, Clip Mount
Available Stock
685
Estimated Ship Time:5-12 working days
25+$2.24
100+$2.09
5,000+$1.9153
8,000+$1.9046
- +
Ext. Price(USD):$56.00
MOQ:25
Mult:1
SPQ:1,000
Adam Tech
ECAD Model:
MTD-A Series Cap (Cover), 2-Pin
Available Stock
765
Estimated Ship Time:9-14 working days
100+$0.1747
250+$0.1638
500+$0.156
- +
Ext. Price(USD):$26.03
MOQ:149
Mult:1
SPQ:1
Sumicon 1600 Series Connector, 34-Pin Shell
Available Stock
188
Estimated Ship Time:6-13 working days
1+$25.8405
10+$18.5976
20+$17.82
50+$15.822
100+$15.6492
- +
Ext. Price(USD):$25.84
MOQ:1
Mult:1
SPQ:1
Fuji Electric
ECAD Model:
Available Stock
20
Estimated Ship Time:5-12 working days
5+$22.3776
10+$20.966
250+$17.6764
500+$17.441
- +
Ext. Price(USD):$111.88
MOQ:5
Mult:1
SPQ:1
Insert MTCP Series
Available Stock
28
Estimated Ship Time:9-14 working days
1+$4,524.4224
10+$4,433.9303
50+$4,345.2515
100+$4,258.3465
500+$4,173.1796
- +
Ext. Price(USD):$4,524.42
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
Pull Tab, 3000 Series, 76.2mm L × 25.4mm W
Available Stock
5,152
Estimated Ship Time:6-13 working days
1+$1.61
10+$1.403
1,000+$0.9623
2,000+$0.9396
- +
Ext. Price(USD):$14.49
MOQ:9
Mult:1
SPQ:1
Amphenol
ECAD Model:
Plug, Sealing, Adhesive Mount
Available Stock
499
Estimated Ship Time:9-14 working days
50+$0.3519
100+$0.3351
250+$0.3141
- +
Ext. Price(USD):$26.04
MOQ:74
Mult:1
SPQ:1
Molex
ECAD Model:
38-Pin Shroud C-Grid SL Series, Clip Mount, 52.47mm L × 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
10-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
4,141
Estimated Ship Time:7-9 working days
17+
250+$0.528
750+$0.517
1,300+$0.506
2,300+$0.495
4,000+$0.484
- +
Ext. Price(USD):$132.00
MOQ:250
Mult:1
SPQ:1
25 / PageGoto