Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
26-Pin Retainer, GT7 Series Housing, Panel Mount
Available Stock
79
Estimated Ship Time:9-14 working days
25+$0.8143
50+$0.7754
1,000+$0.6276
2,500+$0.5883
- +
Ext. Price(USD):$26.05
MOQ:32
Mult:1
SPQ:1
Molex
ECAD Model:
Jumper Flat Cable, 0.50mm Pitch
Available Stock
22
Estimated Ship Time:9-14 working days
1+$10.2384
10+$8.6962
500+$6.5985
1,000+$6.2839
- +
Ext. Price(USD):$30.71
MOQ:3
Mult:1
SPQ:1
24-Pin Strain Relief Omnimate RSV Series Connector
Available Stock
20
Estimated Ship Time:9-14 working days
1+$17.8848
20+$14.4715
500+$11.5324
1,000+$10.9827
- +
Ext. Price(USD):$35.76
MOQ:2
Mult:1
SPQ:1
Amphenol
ECAD Model:
3-Pin Boot, ATM Series
Available Stock
380
Estimated Ship Time:6-13 working days
10+$1.0063
25+$0.8993
2,800+$0.5616
5,200+$0.5508
- +
Ext. Price(USD):$14.08
MOQ:14
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Cover, Flat Cap for Mini-Fit Sigma Sealed Plug Housing
Available Stock
8,132
Estimated Ship Time:7-9 working days
22+
400+$0.2915
1,000+$0.2871
2,000+$0.2805
2,700+$0.2706
8,000+$0.2365
- +
Ext. Price(USD):$116.60
MOQ:400
Mult:1
SPQ:1
Cap (Cover), Dust MTC Series Plug
Available Stock
55
Estimated Ship Time:9-14 working days
50+$26.0721
100+$25.5505
500+$25.0396
1,000+$24.5388
2,000+$24.048
- +
Ext. Price(USD):$1,303.60
MOQ:50
Mult:50
SPQ:1
12-Pin Strain Relief MR (Miniature Rectangular) Series
Available Stock
2,017
Estimated Ship Time:6-13 working days
1+$7.1875
10+$6.281
1,000+$3.9852
2,000+$3.7692
- +
Ext. Price(USD):$14.37
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
9-Pin Retainer, 49517 Series
Available Stock
10,000
Estimated Ship Time:7-9 working days
12+
900+$0.0671
4,800+$0.0616
- +
Ext. Price(USD):$60.39
MOQ:900
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
12-Pin Wedgelock IT Series Connector
Available Stock
4,119
Estimated Ship Time:9-14 working days
50+$0.3106
100+$0.2956
1,000+$0.2512
2,500+$0.2355
- +
Ext. Price(USD):$26.09
MOQ:84
Mult:1
SPQ:1
Molex
ECAD Model:
Backshell, 16-Pin, 20-Pin, MX150 Series
Available Stock
4,495
Estimated Ship Time:9-14 working days
10+$1.2982
25+$1.2169
1,000+$0.938
2,600+$0.8803
- +
Ext. Price(USD):$27.26
MOQ:21
Mult:1
SPQ:1
JAE
ECAD Model:
Polarization Device (Key, Plug, Terminal), QE Series
Available Stock
65
Estimated Ship Time:9-14 working days
1+$8.5752
10+$7.2824
500+$5.5257
1,000+$5.2622
- +
Ext. Price(USD):$34.30
MOQ:4
Mult:1
SPQ:1
Capacitor (Cover), Protective, ATM Series, 8-Pin
Available Stock
141
Estimated Ship Time:6-13 working days
1+$3.6225
10+$2.948
2,550+$1.6848
5,100+$1.6308
- +
Ext. Price(USD):$14.49
MOQ:4
Mult:1
SPQ:1
TE Connectivity Stress Relief, Mini-Universal MATE-N-LOK Series, For 172160-1
Available Stock
1,117
Estimated Ship Time:6-13 working days
1+$2.99
25+$2.552
2,500+$1.8036
5,000+$1.7172
- +
Ext. Price(USD):$14.95
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Retainer, Terminal Position Guarantee, 105415 Series, For Large Pitch Wire-to-Board 5.70mm
Available Stock
2,672
Estimated Ship Time:6-13 working days
25+$0.2024
100+$0.2013
1,000+$0.1555
3,000+$0.1339
- +
Ext. Price(USD):$14.16
MOQ:70
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve, Receptacle, Plastic, For 1 Cable
Available Stock
7,654
Estimated Ship Time:6-13 working days
10+$1.0626
25+$0.9476
1,000+$0.6944
2,500+$0.675
- +
Ext. Price(USD):$14.87
MOQ:14
Mult:1
SPQ:1
U-Clip for LEAVYSEAL Connectors, Fits 15/21/22/26/39/62 Pos
Available Stock
466
Estimated Ship Time:6-13 working days
1+$2.07
10+$1.7595
3,000+$1.0789
5,250+$1.0606
- +
Ext. Price(USD):$14.49
MOQ:7
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Retainer, For 172708/172762/172767/200453/200471 Mini-Fit TPA2 Housing
Available Stock
2,192
Estimated Ship Time:6-13 working days
25+$0.3588
100+$0.3168
5,500+$0.189
11,000+$0.1847
- +
Ext. Price(USD):$14.35
MOQ:40
Mult:1
SPQ:1
18-Pin Holder, AMPMODU MT Series, Bracket Mount
Available Stock
8,715
Estimated Ship Time:6-13 working days
10+$0.6705
25+$0.613
5,000+$0.3499
10,000+$0.3175
- +
Ext. Price(USD):$14.08
MOQ:21
Mult:1
SPQ:1
Locking Latch SEK Series Female Connectors
Available Stock
9,133
Estimated Ship Time:9-14 working days
50+$0.2756
100+$0.2624
1,000+$0.223
2,500+$0.2091
- +
Ext. Price(USD):$26.18
MOQ:95
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
412
Estimated Ship Time:6-13 working days
10+$0.7947
25+$0.7487
1,200+$0.5184
2,800+$0.5011
- +
Ext. Price(USD):$14.30
MOQ:18
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories, Terminal Position Assurance, Straight, Nylon, Black, Gold Plated, Ultra-Fit™ Series, Bag
Available Stock
42,000
Estimated Ship Time:7-9 working days
22+
1,021+$0.0572
- +
Ext. Price(USD):$58.40
MOQ:1,021
Mult:1
SPQ:1
Bus Bar, MTC Series
Available Stock
748
Estimated Ship Time:5-12 working days
1+$56.7525
5+$52.459
100+$47.7006
260+$46.6841
- +
Ext. Price(USD):$56.75
MOQ:1
Mult:1
SPQ:20
Adapter, Universal MATE-N-LOK Series
Available Stock
2,226
Estimated Ship Time:5-12 working days
250+$0.1592
1,000+$0.1341
25,000+$0.1219
50,000+$0.1216
- +
Ext. Price(USD):$39.80
MOQ:250
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Connector Retainer, For 172708/172762/172767/200453/200471 Mini-Fit TPA2 Housing
Available Stock
4,461
Estimated Ship Time:7-10 working days
21+
1,500+$0.1056
3,000+$0.1034
- +
Ext. Price(USD):$158.40
MOQ:1,500
Mult:1
SPQ:1
TE Connectivity DRB Wedge Locking Device, Ensures Terminal Calibration, Anti-Misinsertion, Snap-In Mount, Essential for DRB Connectors
Available Stock
133
Estimated Ship Time:6-13 working days
1+$2.3115
10+$2.0355
1,000+$1.404
2,500+$1.3392
- +
Ext. Price(USD):$16.18
MOQ:7
Mult:1
SPQ:1
25 / PageGoto