Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Shell, 20-Pin, Sumicon 1600 Series Connector
Available Stock
44
Estimated Ship Time:6-13 working days
1+$13.8575
10+$11.718
200+$8.802
500+$8.5104
- +
Ext. Price(USD):$27.71
MOQ:2
Mult:1
SPQ:1
Mounting Base, DMC-M Series
Available Stock
50
Estimated Ship Time:9-14 working days
1+$1,374.7212
- +
Ext. Price(USD):$1,374.72
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Position Assurance (TPA) Mini-Fit Sigma Series 1-Pin Connector, 10.68mm H
Available Stock
15,680
Estimated Ship Time:9-14 working days
100+$0.1668
250+$0.1563
500+$0.1488
1,000+$0.1417
2,500+$0.1328
- +
Ext. Price(USD):$26.02
MOQ:156
Mult:1
SPQ:1
Cap (Cover), Dust Micro Motor Encoders
Available Stock
268
Estimated Ship Time:9-14 working days
25+$0.8113
50+$0.7724
100+$0.7356
250+$0.6894
- +
Ext. Price(USD):$26.77
MOQ:33
Mult:1
SPQ:1
PWR VERSA-LOCK TPA, 1X3
Available Stock
4,774
Estimated Ship Time:9-14 working days
100+$0.2081
250+$0.195
650+$0.1823
1,300+$0.1736
2,600+$0.1653
- +
Ext. Price(USD):$26.01
MOQ:125
Mult:1
SPQ:1
3M
ECAD Model:
50-Pin Retainer Clip, 2500 Series, Bracket Mount, 71.9mm L × 2.8mm W
Available Stock
96
Estimated Ship Time:6-13 working days
1+$1.932
10+$1.6445
1,000+$1.0908
2,500+$1.026
- +
Ext. Price(USD):$15.45
MOQ:8
Mult:1
SPQ:1
NOVO AMP Latch, Ribbon Cable Connector Component, Glass Filled Nylon, 10-64 Pin Options
Available Stock
9,516
Estimated Ship Time:7-9 working days
23+
750+$0.1595
2,000+$0.1562
2,500+$0.1474
5,000+$0.1364
10,000+$0.132
- +
Ext. Price(USD):$119.62
MOQ:750
Mult:250
SPQ:250
Key Rivet, Box Series, Rivet Mount
Available Stock
192
Estimated Ship Time:7-9 working days
17+
48+$2.31
- +
Ext. Price(USD):$110.88
MOQ:48
Mult:1
SPQ:1
TE Connectivity Connector Bracket, AMP CT Series
Available Stock
1,000
Estimated Ship Time:7-9 working days
16+
300+$0.374
750+$0.363
- +
Ext. Price(USD):$112.20
MOQ:300
Mult:1
SPQ:1
TE Connectivity Ejector, Eject Latch, AMP-LATCH Series
Available Stock
10,603
Estimated Ship Time:7-10 working days
22+
400+$0.352
1,120+$0.3036
2,320+$0.2882
4,640+$0.275
10,000+$0.2629
- +
Ext. Price(USD):$140.80
MOQ:400
Mult:80
SPQ:80
Molex
ECAD Model:
Connector Accessory, Terminal Position Assurance Retainer, Right Angle, Bag
Available Stock
20,360
Estimated Ship Time:7-9 working days
20+
834+$0.1397
2,500+$0.1375
4,500+$0.1353
8,500+$0.1331
- +
Ext. Price(USD):$116.50
MOQ:834
Mult:1
SPQ:1
Strain Relief
Available Stock
500
Estimated Ship Time:7-9 working days
22+
100+$1.463
200+$1.43
400+$1.408
- +
Ext. Price(USD):$146.30
MOQ:100
Mult:1
SPQ:1
Deutsch Heat Shrink Sleeve Plug, Plastic, For 1-Wire Cable
Available Stock
7,090
Estimated Ship Time:6-13 working days
1+$4.186
10+$3.399
500+$2.106
1,000+$1.9116
- +
Ext. Price(USD):$16.74
MOQ:4
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
Shell, RPRM Series
Available Stock
475
Estimated Ship Time:7-9 working days
22+
4+$16.401
18+$16.104
35+$15.796
71+$15.499
250+$15.191
- +
Ext. Price(USD):$65.60
MOQ:4
Mult:1
SPQ:1
Hirose Locating Bushing, Bushing
Available Stock
70
Estimated Ship Time:5-10 working days
10+$0.4245
30+$0.4168
50+$0.4053
- +
Ext. Price(USD):$8.49
MOQ:20
Mult:10
2pin Cable Clamp ePower Series Clip Mount, Wire Mount
Available Stock
10
Estimated Ship Time:9-14 working days
1+$13.932
10+$11.8422
500+$8.9862
1,000+$8.5579
- +
Ext. Price(USD):$27.86
MOQ:2
Mult:1
SPQ:1
Gasket
Available Stock
49
Estimated Ship Time:7-9 working days
17+
8+$13.926
23+$13.376
- +
Ext. Price(USD):$111.40
MOQ:8
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
2,571
Estimated Ship Time:6-13 working days
1+$3.7835
10+$3.069
1,000+$2.1816
2,500+$1.9656
- +
Ext. Price(USD):$15.13
MOQ:4
Mult:1
SPQ:1
6-Pin Terminal Position Assurance (TPA), SGI Series
Available Stock
37,070
Estimated Ship Time:6-13 working days
100+$0.0989
250+$0.092
500+$0.0825
800+$0.0671
2,400+$0.0594
- +
Ext. Price(USD):$14.04
MOQ:142
Mult:1
SPQ:1
32-Pin Cap (Cover), AMPMODU Mod IV Series
Available Stock
5,000
Estimated Ship Time:7-9 working days
19+
150+$1.067
300+$1.045
2,000+$0.979
5,000+$0.891
- +
Ext. Price(USD):$160.05
MOQ:150
Mult:1
SPQ:1
Strain Relief
Available Stock
701
Estimated Ship Time:7-9 working days
22+
45+$2.453
100+$2.277
500+$1.727
1,000+$1.298
- +
Ext. Price(USD):$110.38
MOQ:45
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Cavity Plug Straight Polyester Bag
Available Stock
59,973
Estimated Ship Time:7-10 working days
20+
658+$0.0891
5,000+$0.0847
15,000+$0.0814
38,000+$0.0781
- +
Ext. Price(USD):$58.62
MOQ:658
Mult:1
SPQ:1
Key Rivet Mini-Box Series, Adhesive Mount, 3.2mm L
Available Stock
1,985
Estimated Ship Time:5-12 working days
5+$8.694
25+$6.886
450+$6.5163
600+$6.5056
- +
Ext. Price(USD):$43.47
MOQ:5
Mult:1
SPQ:100
Backshell DMC-MD Inserts
Available Stock
225
Estimated Ship Time:5-12 working days
1+$53.4865
5+$46.75
100+$33.812
250+$31.7683
- +
Ext. Price(USD):$53.48
MOQ:1
Mult:1
SPQ:1
12-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
394
Estimated Ship Time:5-12 working days
25+$1.5456
100+$1.4212
5,000+$1.0079
7,500+$0.9951
- +
Ext. Price(USD):$38.64
MOQ:25
Mult:1
SPQ:1
25 / PageGoto