Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
26-Pin Connector Holder CT Series, 30.30mm × 7.55mm × 6.65mm
Available Stock
7,799
Estimated Ship Time:9-14 working days
25+$0.6666
50+$0.6346
1,000+$0.5135
3,000+$0.4752
- +
Ext. Price(USD):$26.66
MOQ:40
Mult:1
SPQ:1
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
4,516
Estimated Ship Time:6-13 working days
10+$0.6003
25+$0.5221
2,500+$0.3229
5,000+$0.311
- +
Ext. Price(USD):$14.09
MOQ:27
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief Clamp, For 2500 Series
Available Stock
3,875
Estimated Ship Time:6-13 working days
1+$1.702
10+$1.4835
2,000+$0.9407
5,000+$0.8888
- +
Ext. Price(USD):$15.31
MOQ:9
Mult:1
SPQ:1
JAE
ECAD Model:
Sleeve
Available Stock
2,309
Estimated Ship Time:9-14 working days
100+$0.23
250+$0.2157
500+$0.2053
1,000+$0.1955
- +
Ext. Price(USD):$26.22
MOQ:114
Mult:1
SPQ:1
Jackscrew Box Series, Thread Mount
Available Stock
54
Estimated Ship Time:7-9 working days
12+
2+$55.638
5+$54.67
10+$53.713
20+$52.756
- +
Ext. Price(USD):$111.27
MOQ:2
Mult:1
SPQ:1
Guide Pin EX Series
Available Stock
109
Estimated Ship Time:6-13 working days
1+$4.37
10+$3.927
500+$2.646
1,000+$2.4084
- +
Ext. Price(USD):$17.48
MOQ:4
Mult:1
SPQ:1
Plug, Sealing, 14.7mm L
Available Stock
204,275
Estimated Ship Time:6-13 working days
100+$0.1012
250+$0.0897
5,000+$0.0724
10,000+$0.068
- +
Ext. Price(USD):$14.06
MOQ:139
Mult:1
SPQ:1
20-Pin Connector Holder, CT Series
Available Stock
11,283
Estimated Ship Time:6-13 working days
10+$0.3968
1,000+$0.3164
3,000+$0.297
5,000+$0.2322
10,000+$0.2246
- +
Ext. Price(USD):$14.28
MOQ:36
Mult:1
SPQ:1
Molex
ECAD Model:
4-Pin Terminal Position Assurance (TPA) L1NK 396 207458 7.6mm H
Available Stock
68,383
Estimated Ship Time:7-9 working days
19+
1,563+$0.0748
4,000+$0.0737
20,000+$0.0605
50,000+$0.0594
- +
Ext. Price(USD):$116.91
MOQ:1,563
Mult:1
SPQ:1
30-Pin Shell DF80 Series
Available Stock
854
Estimated Ship Time:9-14 working days
10+$1.8079
25+$1.6943
250+$1.4399
500+$1.3711
- +
Ext. Price(USD):$27.11
MOQ:15
Mult:1
SPQ:1
3M
ECAD Model:
Ejector Latch, Long, 3000 Series
Available Stock
103
Estimated Ship Time:6-13 working days
10+$0.7395
25+$0.736
1,200+$0.5724
2,800+$0.5346
- +
Ext. Price(USD):$14.05
MOQ:19
Mult:1
SPQ:1
Molex
ECAD Model:
Retainer 6-Pin
Available Stock
73,600
Estimated Ship Time:7-9 working days
21+
4,869+$0.0253
- +
Ext. Price(USD):$123.18
MOQ:4,869
Mult:1
SPQ:1
Latch
Available Stock
2,835
Estimated Ship Time:7-9 working days
15+
313+$0.352
1,544+$0.341
- +
Ext. Price(USD):$110.17
MOQ:313
Mult:1
SPQ:1
CONTACT HOLDER
Available Stock
475
Estimated Ship Time:9-14 working days
25+$0.9249
50+$0.8806
1,000+$0.7128
2,500+$0.6681
- +
Ext. Price(USD):$26.82
MOQ:29
Mult:1
SPQ:1
Backshell, MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
2+$1,036.5786
10+$1,015.8448
50+$995.5276
100+$975.617
500+$956.1047
- +
Ext. Price(USD):$2,073.15
MOQ:2
Mult:2
SPQ:1
Locking Seal Plug, Size 20, Gray
Available Stock
6,602
Estimated Ship Time:9-14 working days
50+$0.3283
100+$0.3127
1,000+$0.2657
3,000+$0.2459
- +
Ext. Price(USD):$26.26
MOQ:80
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
36-Pin Hood and Strain Relief Trident Rectangular Plugs
Available Stock
2,088
Estimated Ship Time:7-9 working days
22+
9+$6.534
43+$6.413
200+$4.95
500+$4.191
- +
Ext. Price(USD):$58.80
MOQ:9
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), AMPMODU Mod II & IV Series
Available Stock
1,108
Estimated Ship Time:7-9 working days
12+
550+$0.2002
- +
Ext. Price(USD):$110.11
MOQ:550
Mult:1
SPQ:1
ITT Cannon
ECAD Model:
4-Pin Wedgelock IT Series Connector
Available Stock
134,671
Estimated Ship Time:7-9 working days
22+
850+$0.1298
4,300+$0.1232
8,500+$0.1188
42,400+$0.1133
127,200+$0.1089
- +
Ext. Price(USD):$110.33
MOQ:850
Mult:1
SPQ:1
Backshell, MTC100 Series
Available Stock
79
Estimated Ship Time:5-12 working days
1+$354.959
5+$323.8676
19+$314.3446
25+$311.2309
- +
Ext. Price(USD):$354.95
MOQ:1
Mult:1
SPQ:1
Retention Clip, AMPMODU Mod II & IV Series, Fixed Mount
Available Stock
200
Estimated Ship Time:5-12 working days
200+$0.4166
900+$0.4026
12,000+$0.3681
25,000+$0.3403
- +
Ext. Price(USD):$83.32
MOQ:200
Mult:1
SPQ:1
9-Pin Gasket, Universal MATE-N-LOK Series
Available Stock
6,015
Estimated Ship Time:6-13 working days
10+$0.5497
25+$0.5037
2,000+$0.3985
5,000+$0.3964
- +
Ext. Price(USD):$14.10
MOQ:28
Mult:1
SPQ:1
Capacitor Cover Locking 18-Pin 35.8mm H
Available Stock
588
Estimated Ship Time:7-9 working days
14+
90+$1.265
250+$1.243
450+$1.221
500+$1.166
- +
Ext. Price(USD):$113.85
MOQ:90
Mult:1
SPQ:1
TE Connectivity Sealing Plug, Non-Conductive Dummy Pin, Fills Open Holes to Maintain Seal Integrity
Available Stock
6,673
Estimated Ship Time:6-13 working days
1+$1.7595
10+$1.3915
1,000+$0.972
2,500+$0.9698
- +
Ext. Price(USD):$15.30
MOQ:11
Mult:1
SPQ:1
Strain Relief for Ribbon Cable Connector, Glass Filled Polyester, Std & Heavy Duty, 6-50 Pins
Available Stock
858
Estimated Ship Time:9-14 working days
10+$1.2679
25+$1.1889
1,000+$0.9161
2,500+$0.8587
- +
Ext. Price(USD):$26.62
MOQ:21
Mult:1
SPQ:1
25 / PageGoto