Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Available Stock
9,143
Estimated Ship Time:6-13 working days
25+$0.2852
100+$0.2588
5,000+$0.1588
10,000+$0.1566
- +
Ext. Price(USD):$14.26
MOQ:50
Mult:1
SPQ:1
4pin Backshell
Available Stock
989
Estimated Ship Time:6-13 working days
1+$2.5415
10+$2.093
3,000+$0.8899
5,400+$0.8726
- +
Ext. Price(USD):$15.24
MOQ:6
Mult:1
SPQ:1
Amphenol
ECAD Model:
Plug, Sealing ePower Series Adhesive Mount
Available Stock
41
Estimated Ship Time:9-14 working days
1+$10.8756
10+$9.2426
500+$7.0134
1,000+$6.679
- +
Ext. Price(USD):$32.62
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Connector Accessories Terminal Position Assurance Straight Nylon Black Bag
Available Stock
2,944
Estimated Ship Time:9-14 working days
100+$0.1555
250+$0.1457
500+$0.1387
1,000+$0.1321
2,500+$0.1238
- +
Ext. Price(USD):$26.12
MOQ:168
Mult:1
SPQ:1
3-Pin Retainer DF33C Series, Fixed Mount
Available Stock
4,471
Estimated Ship Time:6-13 working days
25+$0.2024
100+$0.1806
5,000+$0.1188
10,000+$0.1102
- +
Ext. Price(USD):$14.16
MOQ:70
Mult:1
SPQ:1
TE Connectivity DRB Wedge Locking Device, Ensures Terminal Calibration, Anti-Misinsertion, Snap-In Mount, Essential for DRB Connectors
Available Stock
335
Estimated Ship Time:6-13 working days
1+$5.543
10+$4.004
1,000+$2.7864
2,500+$2.7432
- +
Ext. Price(USD):$16.62
MOQ:3
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
28
Estimated Ship Time:9-14 working days
10+$163.3673
100+$160.1002
200+$156.8981
500+$153.7602
1,000+$150.685
- +
Ext. Price(USD):$1,633.67
MOQ:10
Mult:10
SPQ:1
8-Pin Connector Holder CT Series
Available Stock
9,700
Estimated Ship Time:7-9 working days
21+
450+$0.2706
1,100+$0.2651
2,100+$0.2607
4,100+$0.2563
- +
Ext. Price(USD):$121.77
MOQ:450
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Stress Relief, Stress Elimination Connector, QF 50 Series, For 5320/90170/90635 Series
Available Stock
557
Estimated Ship Time:7-9 working days
12+
122+$0.473
- +
Ext. Price(USD):$57.70
MOQ:122
Mult:1
SPQ:1
Molex
ECAD Model:
Boot, Wire Mount
Available Stock
2
Estimated Ship Time:6-13 working days
1+$14.444
10+$10.9836
510+$8.4888
1,005+$7.9056
- +
Ext. Price(USD):$14.44
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
26-Pin Strain Relief, Quickie™ Series
Available Stock
12,045
Estimated Ship Time:7-9 working days
22+
300+$0.2277
1,300+$0.2233
2,600+$0.22
5,100+$0.2156
- +
Ext. Price(USD):$68.31
MOQ:300
Mult:1
SPQ:1
3M
ECAD Model:
30-Pin Strain Relief, D89 Series
Available Stock
661
Estimated Ship Time:9-14 working days
50+$0.5139
100+$0.4892
1,000+$0.4158
2,500+$0.3897
- +
Ext. Price(USD):$26.20
MOQ:51
Mult:1
SPQ:1
Molex
ECAD Model:
Latch 55513/55514 Series, 6.95mm × 29.84mm
Available Stock
216,000
Estimated Ship Time:7-9 working days
22+
414+$0.1408
5,000+$0.1353
10,000+$0.1298
24,000+$0.1243
73,000+$0.1199
- +
Ext. Price(USD):$58.29
MOQ:414
Mult:1
SPQ:1
AMP-LATCH Universal Connector Ejector Lock, For Novo Socket and Female Socket Connectors Series 609, 622, 636
Available Stock
21,017
Estimated Ship Time:6-13 working days
25+$0.3623
250+$0.3311
5,000+$0.283
10,000+$0.2754
- +
Ext. Price(USD):$14.12
MOQ:39
Mult:1
SPQ:1
Shell, FI-R Series, 51-Pin
Available Stock
75
Estimated Ship Time:9-14 working days
10+$1.1264
25+$1.0558
50+$1.0053
- +
Ext. Price(USD):$27.03
MOQ:24
Mult:1
SPQ:1
JST
ECAD Model:
3-Pin Retainer, XAF Series, Fixed Mount
Available Stock
833
Estimated Ship Time:9-14 working days
100+$0.2309
250+$0.2164
500+$0.206
- +
Ext. Price(USD):$26.09
MOQ:113
Mult:1
SPQ:1
Pololu
ECAD Model:
SENSOR OPTICAL 10-1200CM DIGITAL
Available Stock
217
Estimated Ship Time:9-14 working days
1+$25.935
- +
Ext. Price(USD):$51.87
MOQ:2
Mult:1
SPQ:1
Amphenol PCB Housing, AIPEX Series, Polycarbonate, 118.8 x 114 x 34.75mm, 24-Pin
Available Stock
244
Estimated Ship Time:6-13 working days
1+$18.446
10+$16.0812
280+$12.7548
560+$11.6964
- +
Ext. Price(USD):$18.44
MOQ:1
Mult:1
SPQ:1
TE Connectivity DRB Wedge Locking Device, Ensures Terminal Calibration, Anti-Misinsertion, Snap-In Mount, Essential for DRB Connectors
Available Stock
276
Estimated Ship Time:6-13 working days
1+$2.9325
10+$2.254
2,500+$1.458
5,000+$1.4256
- +
Ext. Price(USD):$14.66
MOQ:5
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post), MTC Series
Available Stock
85
Estimated Ship Time:9-14 working days
50+$27.3288
100+$26.7822
500+$26.2465
1,000+$25.7216
2,000+$25.2072
- +
Ext. Price(USD):$1,366.44
MOQ:50
Mult:50
SPQ:1
AMP-LATCH Universal Connector Ejector Lock, For Novo Socket and Female Socket Connectors Series 609, 622, 636
Available Stock
11,345
Estimated Ship Time:7-9 working days
16+
500+$0.2266
1,300+$0.2222
2,500+$0.2189
4,900+$0.2145
- +
Ext. Price(USD):$113.30
MOQ:500
Mult:1
SPQ:1
Samtec
ECAD Model:
Cap (Cover), 26-Pin, 34.54mm L × 8.76mm H
Available Stock
105
Estimated Ship Time:9-14 working days
1+$1.8036
50+$1.3975
100+$1.1275
500+$0.9601
1,000+$0.8951
- +
Ext. Price(USD):$27.05
MOQ:15
Mult:1
SPQ:1
Polyester PCB Connector Covers: 2.54mm Strain Relief, Dust Protection, MTA 100
Available Stock
368
Estimated Ship Time:6-13 working days
10+$0.6889
25+$0.6302
5,000+$0.3316
10,000+$0.3294
- +
Ext. Price(USD):$14.46
MOQ:21
Mult:1
SPQ:1
Molex
ECAD Model:
32-Pin Shroud C-Grid SL Series, Clip Mount, Free Hanging
Available Stock
867
Estimated Ship Time:9-14 working days
1+$3.4236
10+$2.9052
1,000+$2.0986
2,500+$1.9673
- +
Ext. Price(USD):$27.38
MOQ:8
Mult:1
SPQ:1
1-Pin Cap (Cover) 9176 Series, 3.7mm L × 3.7mm H
Available Stock
244,278
Estimated Ship Time:6-13 working days
100+$0.24
250+$0.1875
6,000+$0.1266
10,000+$0.1232
- +
Ext. Price(USD):$26.64
MOQ:111
Mult:1
SPQ:1
25 / PageGoto