Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire Seal
Available Stock
8,839
Estimated Ship Time:9-14 working days
25+$0.7923
50+$0.7545
2,000+$0.5814
4,000+$0.5536
- +
Ext. Price(USD):$26.14
MOQ:33
Mult:1
SPQ:1
MICROSPACEXS SEALING PLU-1015547
Available Stock
39,400
Estimated Ship Time:7-9 working days
26+
794+$0.1386
50,000+$0.1386
- +
Ext. Price(USD):$110.04
MOQ:794
Mult:1
SPQ:1
Header 14-Pin Cap (Cover) 0600 Series SMD
Available Stock
161
Estimated Ship Time:9-14 working days
1+$3.9096
10+$3.3242
1,000+$2.4016
2,500+$2.2513
- +
Ext. Price(USD):$27.36
MOQ:7
Mult:1
SPQ:1
9-Pin Cap (Cover), Strain Relief, MTA-156 Series, 11.94mm H
Available Stock
4,545
Estimated Ship Time:5-12 working days
250+$0.4033
500+$0.3897
10,000+$0.2733
15,000+$0.2697
- +
Ext. Price(USD):$100.82
MOQ:250
Mult:250
SPQ:250
TE Connectivity Push-In Rivet, Dynamic 3000 Series
Available Stock
11,524
Estimated Ship Time:7-9 working days
14+
1,000+$0.2299
2,000+$0.2266
3,000+$0.2222
5,000+$0.2189
- +
Ext. Price(USD):$229.90
MOQ:1,000
Mult:1
SPQ:1
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Available Stock
4,738
Estimated Ship Time:7-9 working days
21+
30+$3.751
75+$3.685
150+$3.619
300+$3.553
1,000+$3.234
- +
Ext. Price(USD):$112.53
MOQ:30
Mult:1
SPQ:1
2-Pin Backshell
Available Stock
1,199
Estimated Ship Time:6-13 working days
1+$1.8515
10+$1.5755
1,200+$1.0465
2,400+$0.972
- +
Ext. Price(USD):$14.81
MOQ:8
Mult:1
SPQ:1
Fixture, Fixed Mount
Available Stock
1,800
Estimated Ship Time:7-10 working days
23+
443+$0.264
1,382+$0.2508
- +
Ext. Price(USD):$116.95
MOQ:443
Mult:1
SPQ:1
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
3,834
Estimated Ship Time:6-13 working days
10+$0.6728
25+$0.6003
5,000+$0.3877
10,000+$0.365
- +
Ext. Price(USD):$14.12
MOQ:21
Mult:1
SPQ:1
2-Pin Retainer iBridge Ultra Female Connector, Fixed Mount
Available Stock
5,000
Estimated Ship Time:5-10 working days
10+$0.3442
100+$0.3301
250+$0.3148
500+$0.2983
- +
Ext. Price(USD):$6.88
MOQ:20
Mult:10
Connector Terminal 5-Pin TPA Universal MATE-N-LOK Series
Available Stock
2,800
Estimated Ship Time:7-10 working days
23+
1,500+$0.0737
- +
Ext. Price(USD):$110.55
MOQ:1,500
Mult:1
SPQ:1
8-Pin Backshell ATM Series
Available Stock
889
Estimated Ship Time:6-13 working days
1+$4.048
10+$3.212
1,200+$2.4516
3,000+$2.376
- +
Ext. Price(USD):$16.19
MOQ:4
Mult:1
SPQ:1
Protective Cover
Available Stock
62,894
Estimated Ship Time:6-13 working days
100+$0.0771
250+$0.0667
5,000+$0.0497
10,500+$0.0475
- +
Ext. Price(USD):$14.03
MOQ:182
Mult:1
SPQ:1
10-Pin Retainer iBridge Ultra Female Connector, Fixed Mount
Available Stock
2,490
Estimated Ship Time:5-10 working days
10+$0.5353
100+$0.5149
250+$0.492
- +
Ext. Price(USD):$10.70
MOQ:20
Mult:10
Circular Connector Accessory, Protective Cover, Receptacle, MIL-DTL-26482 Series 1 & 2, Bayonet Coupling
Available Stock
601
Estimated Ship Time:9-14 working days
10+$19.2672
20+$18.5328
250+$14.3856
500+$13.7592
- +
Ext. Price(USD):$192.67
MOQ:10
Mult:10
SPQ:1
TE Connectivity 2363714-2
Available Stock
800
Estimated Ship Time:5-10 working days
5+$2.3275
10+$2.1974
50+$2.0904
100+$1.9731
400+$1.8049
- +
Ext. Price(USD):$11.63
MOQ:5
Mult:5
3-Pin Terminal Position Assurance (TPA) Universal MATE-N-LOK Series
Available Stock
5,050
Estimated Ship Time:7-9 working days
23+
1,800+$0.0616
4,500+$0.0605
6,400+$0.0572
- +
Ext. Price(USD):$110.88
MOQ:1,800
Mult:1
SPQ:1
Available Stock
4,638
Estimated Ship Time:6-13 working days
10+$0.8614
25+$0.7694
2,700+$0.5292
5,400+$0.5162
- +
Ext. Price(USD):$14.64
MOQ:17
Mult:1
SPQ:1
Hard Wired Box Accessories, Cover, IP67
Available Stock
1,680
Estimated Ship Time:6-13 working days
1+$3.312
10+$2.882
1,050+$1.8792
2,550+$1.7712
- +
Ext. Price(USD):$16.56
MOQ:5
Mult:1
SPQ:1
8-Pin Boot DTM Series Receptacle
Available Stock
663
Estimated Ship Time:6-13 working days
1+$3.151
10+$2.737
2,500+$1.674
5,000+$1.6308
- +
Ext. Price(USD):$15.75
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Cap (Cover), Locking Squba Series Housings, 18.8mm L × 17.5mm H
Available Stock
1,240
Estimated Ship Time:7-9 working days
23+
409+$0.286
1,100+$0.2805
1,600+$0.2651
- +
Ext. Price(USD):$116.97
MOQ:409
Mult:1
SPQ:1
12-Pin Retainer, iBridge Ultra Female Connector
Available Stock
10,000
Estimated Ship Time:7-9 working days
23+
150+$0.396
1,500+$0.385
2,500+$0.374
5,000+$0.341
- +
Ext. Price(USD):$59.40
MOQ:150
Mult:1
SPQ:1
UNIVERSAL KEY YELLOW
Available Stock
250
Estimated Ship Time:9-14 working days
1+$6.2208
10+$5.2877
1,000+$3.8205
2,500+$3.5816
- +
Ext. Price(USD):$31.10
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
14,332
Estimated Ship Time:6-13 working days
25+$0.4025
100+$0.3663
250+$0.3619
1,000+$0.3078
2,500+$0.2905
- +
Ext. Price(USD):$14.08
MOQ:35
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
20,645
Estimated Ship Time:6-13 working days
25+$0.2427
100+$0.2312
5,000+$0.1696
10,000+$0.1663
- +
Ext. Price(USD):$14.07
MOQ:58
Mult:1
SPQ:1
25 / PageGoto