Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Nylon PCB Connector Covers: 2.54mm Strain Relief, MTA 100
Available Stock
1,483
Estimated Ship Time:6-13 working days
10+$0.9327
100+$0.8492
2,500+$0.6523
5,000+$0.5605
- +
Ext. Price(USD):$14.92
MOQ:16
Mult:1
SPQ:1
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
3,425
Estimated Ship Time:6-13 working days
25+$0.391
100+$0.3597
2,500+$0.2981
5,000+$0.2959
- +
Ext. Price(USD):$14.07
MOQ:36
Mult:1
SPQ:1
3-Pin Plug, Sealing Power Versa-Lock Series
Available Stock
4,029
Estimated Ship Time:6-13 working days
10+$0.7521
25+$0.6716
5,000+$0.4439
8,000+$0.4234
- +
Ext. Price(USD):$14.28
MOQ:19
Mult:1
SPQ:1
Pancon
ECAD Model:
Connector Accessories, Strain Relief Bracket
Available Stock
936
Estimated Ship Time:5-12 working days
192+$0.268
1,152+$0.2076
25,152+$0.1376
50,112+$0.1341
- +
Ext. Price(USD):$51.45
MOQ:192
Mult:192
SPQ:192
Grommet, ePower Series
Available Stock
50
Estimated Ship Time:9-14 working days
10+$2.1308
25+$1.9976
1,000+$1.5394
2,500+$1.4431
- +
Ext. Price(USD):$27.70
MOQ:13
Mult:1
SPQ:1
AMPMODU MT Series Cap (Cover), 10-Pin, 12.7mm L
Available Stock
9,188
Estimated Ship Time:7-9 working days
20+
200+$0.682
450+$0.671
850+$0.66
1,700+$0.649
- +
Ext. Price(USD):$136.40
MOQ:200
Mult:1
SPQ:1
HARTING
ECAD Model:
Grommet, Han PushPull Series
Available Stock
10
Estimated Ship Time:9-14 working days
1+$5.6916
10+$4.8395
- +
Ext. Price(USD):$28.45
MOQ:5
Mult:1
SPQ:1
TE Connectivity HDSCS Housing Slide Lock, Automotive Connector Accessory, HDSCS Series
Available Stock
10,495
Estimated Ship Time:6-13 working days
10+$0.6797
25+$0.6279
5,000+$0.4547
10,000+$0.4428
- +
Ext. Price(USD):$14.27
MOQ:21
Mult:1
SPQ:1
60-Pin Bracket Sumicon 1600 Series Connectors, Bracket Mount
Available Stock
179
Estimated Ship Time:6-13 working days
1+$4.117
10+$3.586
1,000+$2.4516
2,500+$2.3976
- +
Ext. Price(USD):$16.46
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
34-Pin Cap (Cover), EHT Series, 53.89mm(L) × 9.65mm(H)
Available Stock
800
Estimated Ship Time:5-12 working days
25+$0.9818
250+$0.8777
5,000+$0.4808
7,500+$0.4743
- +
Ext. Price(USD):$30.43
MOQ:31
Mult:1
SPQ:1
Molex
ECAD Model:
32-Pin Shroud C-Grid SL Series, Clip Mount, 44.85mm(L) × 19.05mm(H)
Available Stock
500
Estimated Ship Time:7-9 working days
21+
73+$1.606
200+$1.573
400+$1.551
- +
Ext. Price(USD):$117.23
MOQ:73
Mult:1
SPQ:1
Connector Accessory 9-Pin Strain Relief MR (Miniature Rectangular) Series
Available Stock
559
Estimated Ship Time:6-13 working days
1+$7.3715
10+$6.072
1,000+$4.0284
2,000+$3.9204
- +
Ext. Price(USD):$14.74
MOQ:2
Mult:1
SPQ:1
60-Pin Stress Relief, 81.12mm L
Available Stock
2,114
Estimated Ship Time:9-14 working days
72+$0.3436
108+$0.3339
1,008+$0.2851
2,520+$0.2673
- +
Ext. Price(USD):$26.11
MOQ:76
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
58,836
Estimated Ship Time:6-13 working days
25+$0.414
100+$0.3498
6,000+$0.23
10,500+$0.2214
- +
Ext. Price(USD):$14.07
MOQ:34
Mult:1
SPQ:1
732-8052-18 A
Available Stock
31
Estimated Ship Time:9-14 working days
25+$48.892
50+$47.914
100+$46.9557
250+$46.0166
500+$45.0963
- +
Ext. Price(USD):$1,222.30
MOQ:25
Mult:25
SPQ:1
Molex
ECAD Model:
28-Pin Shroud C-Grid SL Series Clamp Mount
Available Stock
825
Estimated Ship Time:9-14 working days
1+$3.6504
10+$3.0974
1,000+$2.2378
2,500+$2.0978
- +
Ext. Price(USD):$29.20
MOQ:8
Mult:1
SPQ:1
80-Pin Cap (Cover) AMPMODU 50/50 Grid Series
Available Stock
67
Estimated Ship Time:7-9 working days
10+
35+$3.179
90+$3.124
200+$3.069
350+$3.014
- +
Ext. Price(USD):$111.26
MOQ:35
Mult:1
SPQ:1
Samtec
ECAD Model:
Samtec Connector Blind Mate, Polarized Key, PK Series
Available Stock
2,926
Estimated Ship Time:6-13 working days
1+$0.759
50+$0.5984
100+$0.473
500+$0.2819
1,000+$0.2797
- +
Ext. Price(USD):$14.42
MOQ:19
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
5+$267.9869
10+$262.6268
50+$257.3739
100+$252.2263
500+$247.1818
- +
Ext. Price(USD):$1,339.93
MOQ:5
Mult:5
SPQ:1
Ribbon Cable Connector Assembly, Pull Ring for Receptacle, Ultra ATA Bus, 2mm Socket & Novo Connector, PVC, UL 94-VTM-1
Available Stock
5,501
Estimated Ship Time:5-12 working days
250+$0.1881
1,000+$0.176
50,000+$0.1557
100,000+$0.1545
- +
Ext. Price(USD):$47.02
MOQ:250
Mult:250
SPQ:250
Molex
ECAD Model:
6-Pin Backshell Mega-Fit Receptacles Free Hanging
Available Stock
4,680
Estimated Ship Time:7-9 working days
16+
200+$0.583
500+$0.572
1,000+$0.561
1,480+$0.539
4,000+$0.462
- +
Ext. Price(USD):$116.60
MOQ:200
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Terminal Position Assurance (TPA) 24.4mm L × 8.85mm H
Available Stock
35,991
Estimated Ship Time:9-14 working days
250+$0.0966
500+$0.092
1,000+$0.0876
3,000+$0.081
- +
Ext. Price(USD):$26.08
MOQ:270
Mult:1
SPQ:1
3M
ECAD Model:
60-Pin Strain Relief 891 Series 80mm (L) × 6.1mm (W)
Available Stock
3,042
Estimated Ship Time:9-14 working days
50+$0.5089
100+$0.4845
1,000+$0.4118
3,000+$0.381
- +
Ext. Price(USD):$26.46
MOQ:52
Mult:1
SPQ:1
Coding Key DMC-MD Inserts
Available Stock
496
Estimated Ship Time:6-13 working days
1+$9.108
10+$8.085
500+$7.182
1,000+$7.1712
- +
Ext. Price(USD):$18.21
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Backshell 204723 Series For Mini-Fit Jr Plug & Receptacle Housing
Available Stock
89
Estimated Ship Time:6-13 working days
25+$0.46
100+$0.4312
2,600+$0.3521
10,400+$0.3391
- +
Ext. Price(USD):$14.26
MOQ:31
Mult:1
SPQ:1
25 / PageGoto