Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Terminal Position Assurance (TPA) C-Grid SL Series 8-Pin Wire Mount 3.2mm H
Available Stock
3,870
Estimated Ship Time:6-13 working days
25+$0.3554
100+$0.33
5,000+$0.2689
10,000+$0.2527
- +
Ext. Price(USD):$14.21
MOQ:40
Mult:1
SPQ:1
24-Pin Connector Position Assurance (CPA) AT Series™
Available Stock
864
Estimated Ship Time:6-13 working days
10+$0.7096
25+$0.6486
5,000+$0.3478
10,000+$0.3413
- +
Ext. Price(USD):$14.19
MOQ:20
Mult:1
SPQ:1
6-Pin Wire-to-Wire Sealed, General Purpose MATE-N-LOK Series, Sealed Mount, Wire Mount
Available Stock
9,998
Estimated Ship Time:9-14 working days
10+$1.6772
25+$1.5716
500+$1.2719
1,000+$1.2154
- +
Ext. Price(USD):$26.83
MOQ:16
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Terminal Position Assurance (TPA) Micro-Fit+ Connector 206461
Available Stock
2,561
Estimated Ship Time:7-9 working days
26+
834+$0.132
2,500+$0.132
60,000+$0.1012
150,000+$0.1001
- +
Ext. Price(USD):$110.08
MOQ:834
Mult:1
SPQ:1
Wire Seal MCP Series Wire Mount
Available Stock
1,876
Estimated Ship Time:7-10 working days
22+
99+$1.122
1,500+$1.122
- +
Ext. Price(USD):$111.07
MOQ:99
Mult:1
SPQ:1
TE Connectivity
ECAD Model:
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
3,601
Estimated Ship Time:6-13 working days
10+$0.5497
25+$0.5026
5,000+$0.2927
10,000+$0.2776
- +
Ext. Price(USD):$14.07
MOQ:28
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Backshell, MX150 Series
Available Stock
307
Estimated Ship Time:9-14 working days
1+$6.3612
10+$5.4054
1,200+$3.8558
2,700+$3.6417
- +
Ext. Price(USD):$31.80
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin Terminal Position Assurance (TPA) Mini-Fit Series
Available Stock
10,327
Estimated Ship Time:9-14 working days
50+$0.3359
100+$0.3198
1,000+$0.2717
2,500+$0.2547
- +
Ext. Price(USD):$26.20
MOQ:78
Mult:1
SPQ:1
Adapter, Universal MATE-N-LOK Series
Available Stock
10,082
Estimated Ship Time:5-12 working days
100+$0.3632
500+$0.3318
7,500+$0.2971
10,000+$0.2945
- +
Ext. Price(USD):$36.32
MOQ:100
Mult:1
SPQ:1
Molex
ECAD Model:
16-Pin Cable Holder for Ribbon Cables, Wire Mount, 7.7mm H
Available Stock
34,000
Estimated Ship Time:7-9 working days
18+
227+$0.2574
3,000+$0.2475
5,000+$0.2365
13,000+$0.2277
- +
Ext. Price(USD):$58.42
MOQ:227
Mult:1
SPQ:1
AMP-LATCH Universal Connector Ejector Lock, For Novo Socket and Female Socket Connectors Series 609, 622, 636
Available Stock
10,126
Estimated Ship Time:7-9 working days
18+
500+$0.22
1,300+$0.2156
2,500+$0.2123
5,000+$0.2079
- +
Ext. Price(USD):$110.00
MOQ:500
Mult:1
SPQ:1
Spacer, 6-Pin
Available Stock
5,400
Estimated Ship Time:7-9 working days
17+
100+$1.122
250+$1.1
500+$1.078
1,000+$1.056
- +
Ext. Price(USD):$112.20
MOQ:100
Mult:1
SPQ:1
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
3,210
Estimated Ship Time:6-13 working days
25+$0.3692
100+$0.3091
5,000+$0.2484
10,000+$0.2408
- +
Ext. Price(USD):$14.02
MOQ:38
Mult:1
SPQ:1
TE Connectivity Connector Cover, MTA-100 Series, For MTA-100 Series
Available Stock
26,941
Estimated Ship Time:5-12 working days
250+$0.1901
2,500+$0.1552
100,000+$0.147
150,000+$0.1449
- +
Ext. Price(USD):$47.52
MOQ:250
Mult:1
SPQ:1
6-Pin Hood and Strain Relief Dynamic Series
Available Stock
4,261
Estimated Ship Time:6-13 working days
1+$2.599
10+$2.2655
1,000+$1.3392
2,500+$1.296
- +
Ext. Price(USD):$15.59
MOQ:6
Mult:1
SPQ:1
Retainer Clip
Available Stock
44,099
Estimated Ship Time:6-13 working days
100+$0.1548
250+$0.1334
1,000+$0.1012
2,800+$0.0859
5,600+$0.0768
- +
Ext. Price(USD):$26.62
MOQ:172
Mult:1
SPQ:1
Harwin
ECAD Model:
10-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
66
Estimated Ship Time:9-14 working days
1+$124.4808
10+$105.8152
25+$99.1963
50+$94.4674
100+$89.9657
- +
Ext. Price(USD):$124.48
MOQ:1
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Boot, ATM Series
Available Stock
533
Estimated Ship Time:6-13 working days
10+$0.9729
25+$0.8982
2,800+$0.5735
5,200+$0.5659
- +
Ext. Price(USD):$14.59
MOQ:15
Mult:1
SPQ:1
TE Connectivity Automotive Connector Mounting Clip, Series 2325098
Available Stock
793
Estimated Ship Time:5-10 working days
1+$1.1472
10+$1.0324
25+$0.905
50+$0.8667
100+$0.8413
- +
Ext. Price(USD):$6.88
MOQ:6
Mult:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
124
Estimated Ship Time:6-13 working days
1+$37.422
10+$31.2228
100+$27.8964
250+$26.5896
- +
Ext. Price(USD):$37.42
MOQ:1
Mult:1
SPQ:1
TE Connectivity Connector Seal, Junior Power Timer Series, Interface Seal
Available Stock
8,335
Estimated Ship Time:6-13 working days
10+$0.6601
25+$0.5865
5,000+$0.4169
10,000+$0.3823
- +
Ext. Price(USD):$14.52
MOQ:22
Mult:1
SPQ:1
EMI Backshell DMC-MD Inserts
Available Stock
70
Estimated Ship Time:7-9 working days
22+
1+$125.95
3+$120.912
10+$116.072
25+$111.43
- +
Ext. Price(USD):$125.95
MOQ:1
Mult:1
SPQ:1
Pancon
ECAD Model:
Cover, 5.1mm L × 7.6mm H
Available Stock
15,500
Estimated Ship Time:5-12 working days
500+$0.2066
1,000+$0.1353
10,000+$0.0926
25,000+$0.0835
- +
Ext. Price(USD):$103.30
MOQ:500
Mult:500
SPQ:500
Ejector Latch, Short CW Protected Headers
Available Stock
4,433
Estimated Ship Time:9-14 working days
25+$0.7901
50+$0.7525
1,000+$0.6089
2,500+$0.5708
- +
Ext. Price(USD):$26.07
MOQ:33
Mult:1
SPQ:1
Molex
ECAD Model:
2-Pin Connector, Terminal Position Assurance (TPA), 9.4mm L × 8.85mm H
Available Stock
53,903
Estimated Ship Time:7-9 working days
21+
3,449+$0.0341
9,000+$0.033
35,000+$0.0319
- +
Ext. Price(USD):$117.61
MOQ:3,449
Mult:1
SPQ:1
25 / PageGoto