Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
50-Pin Shroud C-Grid SL Series, Clip Mount, Free Hanging, 67.71mm L × 19.05mm H
Available Stock
558
Estimated Ship Time:5-12 working days
20+$4.5136
150+$4.066
3,000+$3.1137
6,000+$2.9318
- +
Ext. Price(USD):$90.27
MOQ:20
Mult:1
SPQ:1
10-Pin Grounding Block, Board Mount
Available Stock
360
Estimated Ship Time:7-9 working days
22+
1+$124.828
3+$122.683
100+$91.817
250+$85.481
- +
Ext. Price(USD):$124.82
MOQ:1
Mult:1
SPQ:1
Harwin
ECAD Model:
32-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
70
Estimated Ship Time:9-14 working days
1+$142.7976
10+$121.3877
25+$113.7961
50+$108.3713
100+$103.2074
- +
Ext. Price(USD):$142.79
MOQ:1
Mult:1
SPQ:1
3M
ECAD Model:
3M Stress Relief Clamp, For 2500 Series
Available Stock
4,120
Estimated Ship Time:5-10 working days
10+$1.2797
250+$1.2402
750+$1.202
2,000+$1.1905
4,000+$1.1472
- +
Ext. Price(USD):$12.79
MOQ:10
Mult:10
ITT Cannon Connector Housing, 3 Pos, 5.08mm Pitch, 1 Row
Available Stock
1,116
Estimated Ship Time:5-12 working days
10+$2.507
100+$1.705
5,000+$1.5836
7,500+$1.5729
- +
Ext. Price(USD):$30.08
MOQ:12
Mult:1
SPQ:1
Strain Relief
Available Stock
2,900
Estimated Ship Time:7-9 working days
13+
150+$1.067
300+$1.045
550+$1.023
1,100+$1.001
- +
Ext. Price(USD):$160.05
MOQ:150
Mult:1
SPQ:1
TE DT Tail Cover High Protection, Allows Corrugated Tube Nesting, 180°, 90°, Stress Relief Versions
Available Stock
1,345
Estimated Ship Time:6-13 working days
1+$4.807
10+$4.18
1,200+$2.9484
2,800+$2.8404
- +
Ext. Price(USD):$14.42
MOQ:3
Mult:1
SPQ:1
111-Pin Frame Assembly, Multi-Lock Series, Bracket Mount
Available Stock
130
Estimated Ship Time:5-12 working days
20+$3.5392
60+$3.091
5,000+$2.7071
7,500+$2.6643
- +
Ext. Price(USD):$70.78
MOQ:20
Mult:1
SPQ:20
Amphenol
ECAD Model:
Ejector Latch Quickie™ Series
Available Stock
39,571
Estimated Ship Time:6-13 working days
100+$0.084
250+$0.0805
5,000+$0.0713
10,000+$0.068
- +
Ext. Price(USD):$14.02
MOQ:167
Mult:1
SPQ:1
Connector Accessories Seal Straight Silicon Rubber Blue
Available Stock
419
Estimated Ship Time:6-13 working days
1+$6.118
10+$5.324
1,000+$3.2724
2,500+$3.1212
- +
Ext. Price(USD):$18.35
MOQ:3
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) AMP-LATCH Series
Available Stock
1,995
Estimated Ship Time:7-9 working days
15+
200+$0.715
400+$0.704
800+$0.682
1,600+$0.671
2,000+$0.66
- +
Ext. Price(USD):$143.00
MOQ:200
Mult:1
SPQ:1
ASSMANN WSW IDC Tool, Pull and Insert Tool
Available Stock
1,056
Estimated Ship Time:9-14 working days
36+$0.3975
72+$0.3786
1,008+$0.3141
2,520+$0.2944
- +
Ext. Price(USD):$26.23
MOQ:66
Mult:1
SPQ:1
Molex
ECAD Model:
21-Pin Shroud C-Grid SL Series Wire Mount, 69.69mm L × 8.12mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Cable Clamp ST Series, Bracket Mount, Wire Mount
Available Stock
2,932
Estimated Ship Time:6-13 working days
25+$0.2197
100+$0.2093
5,000+$0.1415
10,000+$0.1382
- +
Ext. Price(USD):$14.06
MOQ:64
Mult:1
SPQ:1
Adam Tech
ECAD Model:
26-Pin Strain Relief, 2FCS Series
Available Stock
1,610
Estimated Ship Time:9-14 working days
100+$0.1896
250+$0.1778
500+$0.1693
1,000+$0.1612
3,000+$0.1491
- +
Ext. Price(USD):$26.16
MOQ:138
Mult:1
SPQ:1
1-Pin Cap (Cover), Protective
Available Stock
1,159
Estimated Ship Time:5-12 working days
50+$0.5877
500+$0.4957
10,000+$0.3795
15,000+$0.3687
- +
Ext. Price(USD):$30.56
MOQ:52
Mult:1
SPQ:1,000
Universal I/O Pin Connector Stress Relief, Ribbon Cable Assembly, Glass-Filled Polyester, Lock Hook, 10-64 Pins
Available Stock
576
Estimated Ship Time:7-9 working days
10+
35+$3.63
80+$3.564
200+$3.498
350+$3.443
- +
Ext. Price(USD):$127.05
MOQ:35
Mult:1
SPQ:1
TE Connectivity Connector Blind Plug, AMPMODU MOD I Series
Available Stock
19,700
Estimated Ship Time:6-13 working days
10+$1.173
25+$1.1201
1,000+$0.7711
5,000+$0.6588
- +
Ext. Price(USD):$14.07
MOQ:12
Mult:1
SPQ:1
2.5mm Sealed Connector: TPAs, Signal Double Lock Connectors
Available Stock
8,275
Estimated Ship Time:6-13 working days
25+$0.184
100+$0.176
5,000+$0.1285
10,000+$0.121
- +
Ext. Price(USD):$14.16
MOQ:77
Mult:1
SPQ:1
Cable Clamp ST Series, Bracket Mount, Wire Mount
Available Stock
160
Estimated Ship Time:6-13 working days
1+$0.7245
10+$0.6199
5,000+$0.365
10,000+$0.3596
- +
Ext. Price(USD):$14.38
MOQ:26
Mult:1
SPQ:1
Molex
ECAD Model:
15pin Shroud C-Grid SL Series Wire Mount 54.45mm L × 8.12mm H
Available Stock
6,500
Estimated Ship Time:7-9 working days
23+
99+$1.188
250+$1.166
2,000+$0.957
5,000+$0.935
- +
Ext. Price(USD):$117.61
MOQ:99
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Rear Cover, Mega-Fit Series, For 170001 Mega-Fit Socket Housing
Available Stock
2,746
Estimated Ship Time:7-9 working days
17+
164+$0.715
450+$0.704
720+$0.649
1,600+$0.572
- +
Ext. Price(USD):$117.26
MOQ:164
Mult:1
SPQ:1
16-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
2,290
Estimated Ship Time:5-12 working days
500+$0.1832
1,000+$0.1528
50,000+$0.1084
100,000+$0.1082
- +
Ext. Price(USD):$91.60
MOQ:500
Mult:500
SPQ:500
3M
ECAD Model:
60-Pin Strain Relief 3000 Series 80.8mm(L) × 6.1mm(W)
Available Stock
637
Estimated Ship Time:9-14 working days
10+$1.229
25+$1.1513
1,000+$0.8873
2,500+$0.8317
- +
Ext. Price(USD):$27.03
MOQ:22
Mult:1
SPQ:1
AMP-LATCH Universal Connector Ejector Lock, For Novo Socket and Female Socket Connectors Series 609, 622, 636
Available Stock
800
Estimated Ship Time:5-12 working days
50+$0.4214
500+$0.3606
10,000+$0.3245
15,000+$0.3238
- +
Ext. Price(USD):$30.34
MOQ:72
Mult:1
SPQ:1
25 / PageGoto