Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Harwin
ECAD Model:
HARWIN Connector Housing, 12 Pos, 2mm Pitch, 2 Row
Available Stock
25
Estimated Ship Time:5-10 working days
1+$4.6014
25+$4.4739
100+$4.321
250+$4.2572
500+$4.1298
- +
Ext. Price(USD):$9.20
MOQ:2
Mult:1
Molex
ECAD Model:
Molex Wire-to-Board Connector Plug, 1 Circuit, Cable Mount
Available Stock
5,648
Estimated Ship Time:6-13 working days
25+$0.4681
100+$0.429
3,000+$0.3229
5,400+$0.3208
- +
Ext. Price(USD):$14.04
MOQ:30
Mult:1
SPQ:1
Available Stock
283
Estimated Ship Time:6-13 working days
25+$0.1668
100+$0.1599
4,000+$0.1123
10,000+$0.1102
- +
Ext. Price(USD):$14.01
MOQ:84
Mult:1
SPQ:1
6-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Available Stock
8,290
Estimated Ship Time:6-13 working days
25+$0.2024
100+$0.1967
250+$0.1848
1,000+$0.1739
9,000+$0.1728
- +
Ext. Price(USD):$14.16
MOQ:70
Mult:1
SPQ:1
4-Pin Backshell AMPSEAL Connectors
Available Stock
250
Estimated Ship Time:7-9 working days
19+
39+$2.86
121+$2.728
- +
Ext. Price(USD):$111.54
MOQ:39
Mult:1
SPQ:1
Mounting Base DMC-MD Inserts, Wire Mount
Available Stock
67
Estimated Ship Time:9-14 working days
1+$45.2196
10+$38.4329
100+$32.6728
250+$30.6301
- +
Ext. Price(USD):$45.21
MOQ:1
Mult:1
SPQ:1
6-Pin Terminator, ATP Series™, Wire Mount
Available Stock
265
Estimated Ship Time:5-12 working days
5+$16.576
10+$16.038
280+$14.4771
560+$12.9791
- +
Ext. Price(USD):$82.88
MOQ:5
Mult:1
SPQ:280
Deutsch PCB Box, PFL Series 135mm × 118mm × 36mm
Available Stock
408
Estimated Ship Time:6-13 working days
1+$21.643
10+$18.522
250+$15.9624
500+$15.1956
- +
Ext. Price(USD):$21.64
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Gasket, MX150L Series, Flange Mount, 52.08mm × 30.48mm × 30.48mm
Available Stock
795
Estimated Ship Time:6-13 working days
10+$0.9683
25+$0.8648
2,640+$0.6005
5,040+$0.5983
- +
Ext. Price(USD):$14.52
MOQ:15
Mult:1
SPQ:1
24-Pin Strain Relief MR (Miniature Rectangular) Series 32.51mm H
Available Stock
150
Estimated Ship Time:6-13 working days
1+$10.35
10+$8.415
500+$6.264
1,000+$5.9616
- +
Ext. Price(USD):$20.70
MOQ:2
Mult:1
SPQ:1
EMI Backshell DMC-MD Inserts
Available Stock
19
Estimated Ship Time:7-9 working days
21+
1+$167.211
2+$160.523
8+$154.099
19+$147.939
- +
Ext. Price(USD):$167.21
MOQ:1
Mult:1
SPQ:1
6-Pin Strain Relief, Universal MATE-N-LOK Series, 13.97mm L
Available Stock
6,884
Estimated Ship Time:6-13 working days
1+$2.047
10+$1.8515
1,000+$1.2528
2,600+$1.2204
- +
Ext. Price(USD):$14.32
MOQ:7
Mult:1
SPQ:1
Amphenol
ECAD Model:
50-Pin Strain Relief, Quickie™ Series
Available Stock
97
Estimated Ship Time:9-14 working days
25+$0.5759
50+$0.5484
- +
Ext. Price(USD):$26.49
MOQ:46
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Rear Cover, Mega-Fit Series, For 170001 Mega-Fit Socket Housing
Available Stock
2,611
Estimated Ship Time:7-9 working days
17+
170+$0.693
450+$0.671
880+$0.638
2,000+$0.561
- +
Ext. Price(USD):$117.81
MOQ:170
Mult:1
SPQ:1
Molex
ECAD Model:
10-Pin Gasket MX150L Series, Flange Mount, 64.75mm × 30.48mm
Available Stock
399
Estimated Ship Time:6-13 working days
1+$1.219
10+$1.0339
2,520+$0.58
5,040+$0.5659
- +
Ext. Price(USD):$14.47
MOQ:14
Mult:1
SPQ:1
Molex
ECAD Model:
Conduit Adapter, SRC Series, 40-Pin Wire Mount
Available Stock
775
Estimated Ship Time:7-9 working days
20+
9+$6.776
90+$6.501
200+$6.237
500+$5.995
- +
Ext. Price(USD):$60.98
MOQ:9
Mult:1
SPQ:1
13-Pin Cap (Cover), Dust MTA-156 Series, 51.51mm L
Available Stock
248
Estimated Ship Time:6-13 working days
10+$0.3243
100+$0.3047
5,000+$0.1804
10,000+$0.1717
- +
Ext. Price(USD):$14.26
MOQ:44
Mult:1
SPQ:1
Connector 1-Pin TH 48.7mm H
Available Stock
1,436
Estimated Ship Time:6-13 working days
1+$2.9555
10+$2.369
2,520+$1.62
5,016+$1.5228
- +
Ext. Price(USD):$14.77
MOQ:5
Mult:1
SPQ:1
HARTING
ECAD Model:
Connector Locking, Guide Pin, For PCB Connector
Available Stock
20
Estimated Ship Time:5-10 working days
1+$1.3893
10+$1.3384
100+$1.2619
- +
Ext. Price(USD):$6.94
MOQ:5
Mult:1
Harwin
ECAD Model:
Backshell Gecko Series 20-Pin Free Hanging
Available Stock
5
Estimated Ship Time:9-14 working days
1+$130.9068
10+$111.281
25+$104.3202
50+$99.347
100+$94.6122
- +
Ext. Price(USD):$130.90
MOQ:1
Mult:1
SPQ:1
EMI Backshell DMC-MD Inserts
Available Stock
26
Estimated Ship Time:9-12 working days
1+$222.6115
5+$211.2026
10+$205.9859
- +
Ext. Price(USD):$222.61
MOQ:1
Mult:1
11-Pin Lock Plate, MIC Series, Board Mount
Available Stock
4,118
Estimated Ship Time:7-9 working days
19+
650+$0.1694
2,000+$0.1661
3,500+$0.1628
4,000+$0.1562
- +
Ext. Price(USD):$110.11
MOQ:650
Mult:1
SPQ:1
Molex
ECAD Model:
17-Pin Cable Holder, Ribbon Cables, Wire Mount, 3.8mm H
Available Stock
6,200
Estimated Ship Time:7-9 working days
14+
250+$0.374
1,200+$0.363
4,700+$0.341
- +
Ext. Price(USD):$93.50
MOQ:250
Mult:1
SPQ:1
4-Pin Retainer iBridge Ultra Female Connector
Available Stock
2,745
Estimated Ship Time:5-12 working days
800+$0.1946
1,600+$0.1924
50,400+$0.1504
100,000+$0.1426
- +
Ext. Price(USD):$155.68
MOQ:800
Mult:800
SPQ:800
Molex
ECAD Model:
5-Pin Terminal Position Assurance (TPA) Ultra-Fit Series
Available Stock
31,365
Estimated Ship Time:6-13 working days
25+$0.1553
100+$0.1484
5,500+$0.1048
11,000+$0.0983
- +
Ext. Price(USD):$14.13
MOQ:91
Mult:1
SPQ:1
25 / PageGoto