Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
20-Pin Cap (Cover), Front AMPMODU MT Series, 30.3mm L
Available Stock
6,105
Estimated Ship Time:7-9 working days
18+
60+$1.947
150+$1.914
4,000+$1.672
5,000+$1.518
- +
Ext. Price(USD):$116.82
MOQ:60
Mult:1
SPQ:1
25-Pin Press-Fit Connector
Available Stock
177
Estimated Ship Time:9-14 working days
1+$17.1612
12+$14.3991
504+$11.062
1,008+$10.5348
- +
Ext. Price(USD):$34.32
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
6-Pin Terminal Position Assurance (TPA) Mini-Fit Series
Available Stock
9,337
Estimated Ship Time:9-14 working days
25+$0.6731
50+$0.6409
1,000+$0.5185
2,500+$0.4861
- +
Ext. Price(USD):$26.25
MOQ:39
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Backshell Mega-Fit Receptacle, Free Hanging
Available Stock
565
Estimated Ship Time:9-14 working days
10+$1.2366
25+$1.1595
1,080+$0.8885
2,520+$0.837
- +
Ext. Price(USD):$27.20
MOQ:22
Mult:1
SPQ:1
Molex
ECAD Model:
Molex Rear Cover, Mega-Fit Series, For 171692 Mega-Fit Socket Housing
Available Stock
38
Estimated Ship Time:5-10 working days
4+$1.0739
- +
Ext. Price(USD):$8.59
MOQ:8
Mult:4
CONEC
ECAD Model:
Strain Relief 14-Pin
Available Stock
3,740
Estimated Ship Time:7-9 working days
18+
550+$0.2189
1,400+$0.2101
- +
Ext. Price(USD):$120.39
MOQ:550
Mult:1
SPQ:1
TE Connectivity TPA Locking Plate for Automotive Connector, EconoSeal J Mark II Series
Available Stock
5,000
Estimated Ship Time:7-9 working days
21+
1,000+$0.2365
2,000+$0.2321
3,000+$0.2277
5,000+$0.2244
- +
Ext. Price(USD):$236.50
MOQ:1,000
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
10+$209.1452
100+$204.9621
200+$200.8628
500+$196.8456
1,000+$192.9087
- +
Ext. Price(USD):$2,091.45
MOQ:10
Mult:10
SPQ:1
Molex
ECAD Model:
10pin Cable Holder Ribbon Cables, Wire Mount, 3.8mm H
Available Stock
2,924
Estimated Ship Time:7-9 working days
18+
642+$0.0913
- +
Ext. Price(USD):$58.61
MOQ:642
Mult:1
SPQ:1
Rear Housing MTC Series
Available Stock
28
Estimated Ship Time:9-14 working days
1+$1,550.4048
10+$1,519.3991
50+$1,489.0111
100+$1,459.2309
500+$1,430.0462
- +
Ext. Price(USD):$1,550.40
MOQ:1
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) AMP-LATCH Series
Available Stock
5,975
Estimated Ship Time:7-9 working days
22+
65+$1.804
200+$1.771
350+$1.738
650+$1.705
5,000+$1.551
- +
Ext. Price(USD):$117.26
MOQ:65
Mult:1
SPQ:1
Harwin
ECAD Model:
10-Pin Backshell, Datamate J-Tek, Datamate Mix-Tek
Available Stock
12
Estimated Ship Time:9-14 working days
1+$68.3532
10+$58.1029
25+$54.4666
50+$51.8692
100+$49.3962
- +
Ext. Price(USD):$68.35
MOQ:1
Mult:1
SPQ:1
HARTING
ECAD Model:
Pin Header, Har-Modular Series, Right Angle
Available Stock
40
Estimated Ship Time:5-10 working days
1+$1.2874
10+$1.2619
100+$1.2109
- +
Ext. Price(USD):$7.72
MOQ:6
Mult:1
16-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
485
Estimated Ship Time:6-13 working days
25+$0.4232
100+$0.3586
5,000+$0.2398
10,000+$0.2344
- +
Ext. Price(USD):$14.38
MOQ:34
Mult:1
SPQ:1
PCU 91P RETAINER HSG-MCP
Available Stock
3,362
Estimated Ship Time:6-13 working days
10+$0.874
25+$0.7981
2,000+$0.4925
4,000+$0.4676
- +
Ext. Price(USD):$14.85
MOQ:17
Mult:1
SPQ:1
EMI Backshell DMC-MD Inserts
Available Stock
3
Estimated Ship Time:5-12 working days
1+$331.672
7+$312.6005
13+$311.8194
19+$311.0383
25+$240.2364
- +
Ext. Price(USD):$331.67
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
3-Pin Backshell MultiCat Housings
Available Stock
453
Estimated Ship Time:9-14 working days
1+$4.0284
10+$3.4268
2,000+$2.3574
4,000+$2.2451
- +
Ext. Price(USD):$28.19
MOQ:7
Mult:1
SPQ:1
Requires flange for complete Dech DRB assembly. Multiple flanges available to meet design requirements.
Available Stock
1,054
Estimated Ship Time:6-13 working days
1+$14.6395
10+$12.8196
25+$10.9836
50+$10.5192
100+$10.26
- +
Ext. Price(USD):$14.63
MOQ:1
Mult:1
SPQ:1
20-Pin Holder CT Series, Bracket Mount
Available Stock
7,773
Estimated Ship Time:7-9 working days
17+
350+$0.3278
850+$0.3223
1,700+$0.3168
3,400+$0.3113
- +
Ext. Price(USD):$114.73
MOQ:350
Mult:1
SPQ:1
Harwin
ECAD Model:
16-Pin Backshell Gecko Series
Available Stock
163
Estimated Ship Time:9-14 working days
1+$138.5208
10+$117.7492
25+$110.3846
50+$105.122
100+$100.1128
- +
Ext. Price(USD):$138.52
MOQ:1
Mult:1
SPQ:1
Sumicon 1600 Series Connector, 28-Pin, Bracket Mount
Available Stock
43
Estimated Ship Time:6-13 working days
1+$3.2545
10+$2.827
1,000+$1.9548
2,500+$1.9008
- +
Ext. Price(USD):$16.27
MOQ:5
Mult:1
SPQ:1
Mounting Base 1-Pin DMC-MD Inserts Panel Mount
Available Stock
28
Estimated Ship Time:9-14 working days
10+$163.3673
100+$160.1002
200+$156.8981
500+$153.7602
1,000+$150.685
- +
Ext. Price(USD):$1,633.67
MOQ:10
Mult:10
SPQ:1
Harwin
ECAD Model:
HARWIN Connector Housing, 12 Pos, 2mm Pitch, 2 Row
Available Stock
25
Estimated Ship Time:5-10 working days
1+$4.6014
25+$4.4739
100+$4.321
250+$4.2572
500+$4.1298
- +
Ext. Price(USD):$9.20
MOQ:2
Mult:1
Molex
ECAD Model:
Molex Wire-to-Board Connector Plug, 1 Circuit, Cable Mount
Available Stock
5,648
Estimated Ship Time:6-13 working days
25+$0.4681
100+$0.429
3,000+$0.3229
5,400+$0.3208
- +
Ext. Price(USD):$14.04
MOQ:30
Mult:1
SPQ:1
Available Stock
283
Estimated Ship Time:6-13 working days
25+$0.1668
100+$0.1599
4,000+$0.1123
10,000+$0.1102
- +
Ext. Price(USD):$14.01
MOQ:84
Mult:1
SPQ:1
25 / PageGoto