Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
ITT Cannon 12-Pin D-Sub Housing, TSTRECT Series, ABS Body, Straight Out
Available Stock
65
Estimated Ship Time:5-12 working days
5+$7.2565
25+$5.819
2,500+$2.8141
5,000+$2.4075
- +
Ext. Price(USD):$36.28
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
Terminal Block, 20-Pin, TPA, Micro-Fit+, 206461, Fixed Mount
Available Stock
7,579
Estimated Ship Time:6-13 working days
25+$0.3416
100+$0.2882
4,000+$0.189
12,000+$0.1814
- +
Ext. Price(USD):$14.00
MOQ:41
Mult:1
SPQ:1
Molex
ECAD Model:
8-Pin Backshell MultiCat Housings 27.4mm × 44.9mm
Available Stock
5,994
Estimated Ship Time:7-9 working days
19+
109+$1.078
300+$1.056
2,000+$0.88
5,000+$0.847
- +
Ext. Price(USD):$117.50
MOQ:109
Mult:1
SPQ:1
40-Pin Cap (Cover), Front AMPMODU MT Series
Available Stock
2,833
Estimated Ship Time:6-13 working days
1+$3.2545
50+$2.97
2,500+$2.9052
- +
Ext. Price(USD):$16.27
MOQ:5
Mult:1
SPQ:1
Bulgin
ECAD Model:
Bulgin Automotive Connector Hinge Lock, Wedge Lock, WLP12 Series, 2-Pos
Available Stock
6,949
Estimated Ship Time:5-10 working days
50+$0.5234
100+$0.5081
250+$0.4918
500+$0.4788
- +
Ext. Price(USD):$26.17
MOQ:50
Mult:50
Sealing Plug, Circular Connector
Available Stock
2,694
Estimated Ship Time:6-12 working days
100+$0.1208
- +
Ext. Price(USD):$25.00
MOQ:207
Mult:1
20-Pin Cap (Cover), Strain Relief, MTA-156 Series
Available Stock
1,050
Estimated Ship Time:5-12 working days
125+$0.453
500+$0.4125
10,000+$0.2607
15,000+$0.2535
- +
Ext. Price(USD):$56.62
MOQ:125
Mult:125
SPQ:125
3M
ECAD Model:
3M Stress Relief Clamp, For 891 Series
Available Stock
779
Estimated Ship Time:5-12 working days
100+$0.3196
500+$0.2921
15,000+$0.2559
25,000+$0.2517
- +
Ext. Price(USD):$31.96
MOQ:100
Mult:1
SPQ:1,000
Cap (Cover) 2-Pin 9176 Series
Available Stock
518
Estimated Ship Time:6-13 working days
25+$0.4848
100+$0.4186
5,000+$0.2882
10,000+$0.2723
- +
Ext. Price(USD):$26.66
MOQ:55
Mult:1
SPQ:1
Amphenol
ECAD Model:
2pin Wedge for Sockets ATP Series™
Available Stock
1,109
Estimated Ship Time:6-13 working days
25+$0.3945
100+$0.374
5,600+$0.2527
10,400+$0.2452
- +
Ext. Price(USD):$14.20
MOQ:36
Mult:1
SPQ:1
8-Pin Cap (Cover) AMPMODU Mod IV Series, 12.47mm L
Available Stock
674
Estimated Ship Time:7-9 working days
10+
30+$4.356
65+$4.279
150+$4.202
300+$4.136
- +
Ext. Price(USD):$130.68
MOQ:30
Mult:1
SPQ:1
9-Pin Cap (Cover), Dust MTA-100 Series
Available Stock
411
Estimated Ship Time:5-12 working days
100+$0.244
1,000+$0.2056
50,000+$0.1647
100,000+$0.1581
- +
Ext. Price(USD):$30.01
MOQ:123
Mult:1
SPQ:1
Boot
Available Stock
257
Estimated Ship Time:5-10 working days
1+$2.6002
10+$2.3963
25+$2.3198
- +
Ext. Price(USD):$7.80
MOQ:3
Mult:1
9-Pin Strain Relief, Omnimate RSV Series, 9mm H
Available Stock
25
Estimated Ship Time:9-14 working days
1+$14.742
10+$12.5269
500+$9.5059
1,000+$9.0528
- +
Ext. Price(USD):$29.48
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
MICRO-FIT PLUS TPA 2X4
Available Stock
16,234
Estimated Ship Time:6-13 working days
25+$0.1748
100+$0.1656
250+$0.1419
1,000+$0.1296
2,500+$0.1285
- +
Ext. Price(USD):$14.15
MOQ:81
Mult:1
SPQ:1
3-Pin Shroud AMPMODU MTE Series Panel Mount
Available Stock
140
Estimated Ship Time:7-10 working days
14+
59+$1.892
800+$1.892
50,000+$1.254
100,000+$1.177
- +
Ext. Price(USD):$111.62
MOQ:59
Mult:1
SPQ:1
Molex
ECAD Model:
Gasket
Available Stock
76,000
Estimated Ship Time:7-9 working days
18+
800+$0.0759
4,200+$0.0704
9,100+$0.0649
- +
Ext. Price(USD):$60.72
MOQ:800
Mult:1
SPQ:1
Molex
ECAD Model:
Molex PCB Connector Housing, 1 Circuit, 4.2mm Pitch, 1 Row
Available Stock
6,078
Estimated Ship Time:9-14 working days
100+$0.185
250+$0.1734
500+$0.1651
1,000+$0.1572
2,500+$0.1474
- +
Ext. Price(USD):$26.08
MOQ:141
Mult:1
SPQ:1
Molex
ECAD Model:
36-Pin Shroud C-Grid SL Series, Bracket Mount, Free Hanging, 19.05mm H
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Lock Plate, 6-Pin, EconoSeal Series, Board Mount
Available Stock
39,885
Estimated Ship Time:6-13 working days
10+$0.7038
25+$0.644
5,000+$0.3672
10,000+$0.2992
- +
Ext. Price(USD):$14.07
MOQ:20
Mult:1
SPQ:1
Available Stock
430
Estimated Ship Time:5-12 working days
5+$17.4048
25+$14.102
500+$12.4869
1,000+$12.4548
- +
Ext. Price(USD):$87.02
MOQ:5
Mult:1
SPQ:100
1pin Wire Seal HVA 800 Series Wire Mount 19.9mm L × 7.8mm H
Available Stock
4,905
Estimated Ship Time:6-13 working days
1+$3.2775
10+$2.783
1,000+$1.9332
2,000+$1.7388
- +
Ext. Price(USD):$16.38
MOQ:5
Mult:1
SPQ:1
Molex
ECAD Model:
TPA, 3POS Housing Connector, Nylon
Available Stock
38,028
Estimated Ship Time:7-9 working days
21+
950+$0.0627
2,000+$0.0583
4,000+$0.0561
5,000+$0.0517
10,000+$0.0495
- +
Ext. Price(USD):$59.56
MOQ:950
Mult:1
SPQ:1
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Available Stock
28
Estimated Ship Time:9-14 working days
10+$176.8878
100+$173.3502
200+$169.8831
500+$166.4855
1,000+$163.1558
- +
Ext. Price(USD):$1,768.87
MOQ:10
Mult:10
SPQ:1
HARTING
ECAD Model:
HARTING Strain Relief, Stress Elimination Connector, for SEK Series
Available Stock
1,000
Estimated Ship Time:5-10 working days
10+$0.3607
30+$0.3543
50+$0.3454
- +
Ext. Price(USD):$7.21
MOQ:20
Mult:10
25 / PageGoto