Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
30-Pin Cap (Cover), Front AMPMODU MT Series
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.5125
5,000+$1.3625
50,000+$1.15
100,000+$1.0625
- +
Ext. Price(USD):$4,537.50
MOQ:3,000
Mult:3,000
JST
ECAD Model:
Connector Housing, Polyamide 66, Blue
Available Stock
2,000
Estimated Ship Time:3-4 working days
21+
500+$0.0099
1,000+$0.0096
2,000+$0.0094
- +
Ext. Price(USD):$4.95
MOQ:500
Mult:1
SPQ:1,000
30-Pin Shell DF81 Series
Available Stock
7,564
Estimated Ship Time:5-9 working days
22+
10+$0.2043
50+$0.1549
150+$0.1523
- +
Ext. Price(USD):$2.04
MOQ:10
Mult:5
SPQ:10,000
Boot
Available Stock
76
Estimated Ship Time:4-6 working days
24+
1+$2.5424
300+$1.8752
600+$1.1976
- +
Ext. Price(USD):$2.54
MOQ:1
Mult:1
SPQ:600
Molex
ECAD Model:
12-Pin Wedgelock ML-XT 93444 Housing 26.95mm L × 14.6mm H
Available Stock
55
Estimated Ship Time:4-6 working days
21+
1+$0.1411
- +
Ext. Price(USD):$0.14
MOQ:1
Mult:1
SPQ:1
Strain Relief, Minitek™, 26-Pin
Pre-order
5,320
Factory Lead Time:10-16 weeks
24+
532+$0.8004
798+$0.7795
- +
Ext. Price(USD):$425.81
MOQ:532
Mult:266
SPQ:266
4-Pin PCB Frame DuoPlug Mark II PCB Connector, PCB Mount
Pre-order
105,000
Factory Lead Time:22-26 weeks
1,050+$0.34
4,200+$0.3225
25,000+$0.2838
50,000+$0.265
500,000+$0.2475
- +
Ext. Price(USD):$357.00
MOQ:1,050
Mult:1,050
SPQ:1,050
Seal Protector, Micro Quadlok Series, Adhesive Mount
Pre-order
500,000
Factory Lead Time:25-42 weeks
5,000+$0.1249
- +
Ext. Price(USD):$624.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Molex
ECAD Model:
Available Stock
7
Estimated Ship Time:5-8 working days
25+
1+$0.6176
10+$0.5147
100+$0.4476
400+$0.4183
- +
Ext. Price(USD):$0.61
MOQ:1
Mult:1
SPQ:400
Molex
ECAD Model:
Connector Accessories, Retainer, Straight, Bag
Available Stock
8,400
Estimated Ship Time:3-5 working days
25+
1+$0.0603
200+$0.0533
400+$0.0463
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:400
OTHER CONNECTOR ACCESSORIES;
Available Stock
2,791
Estimated Ship Time:6-12 working days
10+$0.3286
100+$0.2944
2,500+$0.2839
5,000+$0.2839
- +
Ext. Price(USD):$26.28
MOQ:80
Mult:10
RETAINER, 24P, PLUG, 50PC; Accessory Type:Retainer; For Use With:Hirose AU1 Series USB Type-C Automotive Connectors; Product Range:AU1 Series 29AM9670
Available Stock
384
Estimated Ship Time:6-12 working days
1+$1.7528
10+$1.6854
500+$1.4562
2,500+$1.4562
- +
Ext. Price(USD):$25.28
MOQ:15
Mult:1
8-Pin Shroud AMPMODU MTE Series
Available Stock
635
Estimated Ship Time:7-9 working days
18+
75+$1.562
200+$1.529
400+$1.507
- +
Ext. Price(USD):$117.15
MOQ:75
Mult:1
SPQ:1
COMPRESSION CONTACT, 1PIN, 600V, SMD;
Available Stock
2,995
Estimated Ship Time:6-12 working days
10+$0.4492
100+$0.3815
2,500+$0.3231
5,000+$0.2923
- +
Ext. Price(USD):$31.44
MOQ:70
Mult:10
HARTING
ECAD Model:
HARTING Connector Cover, DIN Rail Mount, For PCB Connector
Available Stock
126
Estimated Ship Time:5-10 working days
1+$1.3638
10+$1.3129
100+$1.2619
- +
Ext. Price(USD):$6.81
MOQ:5
Mult:1
Molex
ECAD Model:
Heavy Duty Power Connectors Ultra-Fit Connector Position Assurance (CPA) Retainer UL 94V-0 Red
Available Stock
71,160
Estimated Ship Time:7-9 working days
25+
1,429+$0.0814
3,600+$0.0803
750,000+$0.0649
1,500,000+$0.0605
- +
Ext. Price(USD):$116.32
MOQ:1,429
Mult:1
SPQ:1
Amphenol
ECAD Model:
2-Pin Gasket, ePower Series
Available Stock
24
Estimated Ship Time:9-14 working days
1+$4.4388
10+$3.7735
1,000+$2.726
2,500+$2.5555
- +
Ext. Price(USD):$26.63
MOQ:6
Mult:1
SPQ:1
3M
ECAD Model:
Pull Tab 3000 Series, 76.2mm L × 38.1mm W
Available Stock
686
Estimated Ship Time:6-13 working days
1+$1.817
10+$1.5525
2,000+$0.9623
5,000+$0.9418
- +
Ext. Price(USD):$14.53
MOQ:8
Mult:1
SPQ:1
22 Position Receptacle Housing Kit Crimp UL 94V-0 1500 VAC Wire & Cable Power & Signal Panel Mount RAYCHEM MTC100
Available Stock
14
Estimated Ship Time:7-9 working days
22+
1+$150.271
2+$147.686
4+$145.09
8+$142.505
- +
Ext. Price(USD):$150.27
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Heavy Duty Power Connectors Nano-Fit Connector Position Assurance (CPA) Retainer UL 94V-0 Red
Available Stock
12,962
Estimated Ship Time:7-9 working days
25+
1,389+$0.0836
3,500+$0.0825
7,000+$0.0803
- +
Ext. Price(USD):$116.12
MOQ:1,389
Mult:1
SPQ:1
Available Stock
4,971
Estimated Ship Time:6-13 working days
10+$0.7728
25+$0.69
5,000+$0.4752
10,000+$0.4612
- +
Ext. Price(USD):$14.68
MOQ:19
Mult:1
SPQ:1
Amphenol
ECAD Model:
8pin Strain Relief Quickie™ Series
Available Stock
6,120
Estimated Ship Time:7-9 working days
21+
250+$0.2332
1,300+$0.2299
2,500+$0.2255
5,000+$0.2211
- +
Ext. Price(USD):$58.30
MOQ:250
Mult:1
SPQ:1
Amphenol
ECAD Model:
6-Pin Boot, ATM Series
Available Stock
516
Estimated Ship Time:6-13 working days
10+$1.058
25+$0.9959
2,800+$0.6826
5,200+$0.6739
- +
Ext. Price(USD):$14.81
MOQ:14
Mult:1
SPQ:1
Amphenol
ECAD Model:
6pin Wedge for Sockets ATP Series™
Available Stock
3,187
Estimated Ship Time:6-13 working days
10+$0.6981
25+$0.6854
2,600+$0.4417
5,000+$0.4331
- +
Ext. Price(USD):$14.66
MOQ:21
Mult:1
SPQ:1
40-Pin Shell DF81 Series Connector Housing
Available Stock
1,923
Estimated Ship Time:6-13 working days
1+$2.7255
10+$2.323
1,000+$1.4472
5,000+$1.3932
- +
Ext. Price(USD):$16.35
MOQ:6
Mult:1
SPQ:1
25 / PageGoto