Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
40-Pin Cap (Cover) DF56 Series
Available Stock
10,000
Estimated Ship Time:4-6 working days
20+
10,000+$0.0558
20,000+$0.0549
40,000+$0.0535
- +
Ext. Price(USD):$558.00
MOQ:10,000
Mult:10,000
SPQ:10,000
18-Pin Terminal Position Assurance (TPA) Economy Power Housings 44.4mm × 7.8mm H
Pre-order
960,000
Factory Lead Time:22-26 weeks
9,600+$0.1275
25,200+$0.11
100,000+$0.085
- +
Ext. Price(USD):$1,224.00
MOQ:9,600
Mult:9,600
Lock Plate Power Double Lock Series, 3-Pin, Board Mount, 22.8mm L × 5.85mm H
Pre-order
10,000,000
Factory Lead Time:22-26 weeks
100,000+$0.05
- +
Ext. Price(USD):$5,000.00
MOQ:100,000
Mult:100,000
6-Pin Lock Plate Power Double Lock Series Board Mount
Available Stock
60
Estimated Ship Time:4-5 working days
1+$0.4117
100+$0.4016
500+$0.3849
- +
Ext. Price(USD):$0.41
MOQ:1
Mult:1
Sumicon 1600 Series Connector, 45-Pin Bracket Mount
Available Stock
177
Estimated Ship Time:14-17 working days
1+$2.9428
50+$2.0591
2,000+$1.4939
4,000+$1.4905
- +
Ext. Price(USD):$50.02
MOQ:17
Mult:1
SPQ:1
Polarizing Device (Key, Plug, Post) AMP-LATCH Series 8.5mm L
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$0.65
- +
Ext. Price(USD):$6,500.00
MOQ:10,000
Mult:10,000
3-Pin Strain Relief, Universal MATE-N-LOK Series
Available Stock
5,340
Estimated Ship Time:3-5 working days
22+
1+$0.6296
1,500+$0.558
3,000+$0.4845
- +
Ext. Price(USD):$0.62
MOQ:1
Mult:1
SPQ:3,000
20-Pin Bracket Sumicon 1600 Series Connectors Bracket Mount 35mm L × 18.5mm H
Available Stock
855
Estimated Ship Time:14-17 working days
1+$2.2756
50+$1.6509
2,000+$1.156
4,000+$1.1526
- +
Ext. Price(USD):$50.06
MOQ:22
Mult:1
SPQ:1
Amphenol
ECAD Model:
Strain Relief Quickie™ Series 64-Pin
Pre-order
2,160
Factory Lead Time:10-16 weeks
24+
216+$0.5483
324+$0.534
- +
Ext. Price(USD):$118.43
MOQ:216
Mult:108
SPQ:108
5-Pin Retainer DF22 Series, Fixed Mount
Available Stock
2
Estimated Ship Time:4-6 working days
22+
1+$0.1568
- +
Ext. Price(USD):$0.15
MOQ:1
Mult:1
SPQ:1
23-Pin Cap (Cover), Dust MTA-100 Series
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.7375
500+$0.6875
1,000+$0.6125
2,500+$0.5625
5,000+$0.5375
- +
Ext. Price(USD):$92.18
MOQ:125
Mult:125
SPQ:125
Connector Accessory, Double-Lock Plate, 15 POS, Yellow
Available Stock
1,200
Estimated Ship Time:6-7 working days
26+
300+$0.1189
- +
Ext. Price(USD):$35.67
MOQ:300
Mult:300
Backshell
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$1,474.025
50+$1,304.4375
100+$1,095.725
250+$1,043.5625
500+$965.2875
- +
Ext. Price(USD):$36,850.62
MOQ:25
Mult:25
SPQ:25
8-Pin TPA Grace Inertia Connectors
Available Stock
1,787
Estimated Ship Time:6-7 working days
20+$0.0541
- +
Ext. Price(USD):$1.08
MOQ:20
Mult:20
Amphenol
ECAD Model:
4-Pin Boot, ATM Series
Available Stock
780
Estimated Ship Time:4-6 working days
1+$0.3652
96+$0.3004
- +
Ext. Price(USD):$0.36
MOQ:1
Mult:1
16-Pin Plug, Sealing Mini-Universal MATE-N-LOK Series, Adhesive Mount
Available Stock
15,000
Estimated Ship Time:4-5 working days
1,000+$0.9917
2,000+$0.975
4,000+$0.9539
- +
Ext. Price(USD):$991.70
MOQ:1,000
Mult:1,000
SPQ:15,000
TE Connectivity Automotive Connector TPA Lock, EconoSeal III Series, 2-Way
Available Stock
4,247
Estimated Ship Time:7-9 working days
21+
700+$0.1683
1,700+$0.165
3,300+$0.1617
4,000+$0.1562
- +
Ext. Price(USD):$117.81
MOQ:700
Mult:1
SPQ:1
12-Pin Cable Clamp, Clamp Mount, Wire Mount
Pre-order
76,800
Factory Lead Time:22-26 weeks
768+$11.3125
1,000+$9.5375
100,000+$4.8375
250,000+$4.6375
- +
Ext. Price(USD):$8,688.00
MOQ:768
Mult:768
Amphenol
ECAD Model:
6-Pin Boot AT Series™
Available Stock
867
Estimated Ship Time:4-6 working days
1+$0.3819
1,200+$0.3235
- +
Ext. Price(USD):$0.38
MOQ:1
Mult:1
Backshell
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$1,474.025
50+$1,304.4375
100+$1,095.725
250+$1,043.5625
500+$965.2875
- +
Ext. Price(USD):$36,850.62
MOQ:25
Mult:25
SPQ:25
Protective Cover, MTC Series
Pre-order
4,800
Factory Lead Time:22-26 weeks
48+$1,390.2625
52+$1,360.3625
100+$1,181.725
252+$1,112.2
500+$1,042.7125
- +
Ext. Price(USD):$66,732.60
MOQ:48
Mult:48
SPQ:48
Available Stock
5,008
Estimated Ship Time:6-7 working days
26+
20+$0.0396
5,000+$0.0181
- +
Ext. Price(USD):$0.79
MOQ:20
Mult:20
12-Pin Cap (Cover) AMPMODU Level V Series
Pre-order
800,000
Factory Lead Time:22-26 weeks
8,000+$2.8
10,000+$2.6625
25,000+$2.525
- +
Ext. Price(USD):$22,400.00
MOQ:8,000
Mult:8,000
SPQ:8,000
Sumicon 1600 Series Connector, 34-Pin Shell
Available Stock
195
Estimated Ship Time:14-17 working days
1+$14.9481
5+$11.7217
100+$7.9326
200+$7.8788
- +
Ext. Price(USD):$59.79
MOQ:4
Mult:1
SPQ:1
TE Connectivity Connector Retainer, EP2.5 Series
Available Stock
42,400
Estimated Ship Time:6-7 working days
26+
800+$0.0263
- +
Ext. Price(USD):$21.04
MOQ:800
Mult:800
25 / PageGoto