Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Yazaki
ECAD Model:
Available Stock
11,526
Estimated Ship Time:3-5 working days
25+
1+$0.2476
2,000+$0.1858
4,000+$0.1238
- +
Ext. Price(USD):$0.24
MOQ:1
Mult:1
SPQ:8,000
multicomp
ECAD Model:
STRAIN RELIEF BOOT, 1POS, PVC, BLUE; Accessory Type:Strain Relief Boot; For Use With:RJ45 Modular Connectors; No. of Positions:1Positions; Strain Relief Material:PVC (Polyvinylchloride); Product Range 15AC7644
Available Stock
13,116
Estimated Ship Time:6-12 working days
1+$0.462
100+$0.4435
250+$0.4139
500+$0.4065
1,000+$0.4065
- +
Ext. Price(USD):$24.02
MOQ:52
Mult:1
Molex
ECAD Model:
Connector Accessories Terminal Position Assurance Straight Nylon Black Bag
Available Stock
3,360
Estimated Ship Time:6-12 working days
100+$0.1455
500+$0.1358
1,000+$0.1358
2,000+$0.1334
3,000+$0.1334
- +
Ext. Price(USD):$24.73
MOQ:170
Mult:10
TE Connectivity Stress Relief, MATE-N-LOK Series, For MATE-N-LOK Series
Available Stock
3,500
Estimated Ship Time:4-5 working days
3,500+$0.4608
7,000+$0.453
14,000+$0.4432
- +
Ext. Price(USD):$1,612.80
MOQ:3,500
Mult:3,500
SPQ:3,500
Amphenol
ECAD Model:
2pin Wedge for Pins ATM Series Edge Mount
Available Stock
869
Estimated Ship Time:3-5 working days
25+
1+$0.1461
250+$0.1096
500+$0.073
- +
Ext. Price(USD):$0.14
MOQ:1
Mult:1
SPQ:500
9-Pin PCB Frame DuoPlug Mark II PCB Connector, PCB Mount
Pre-order
3,900,000
Factory Lead Time:22-26 weeks
39,000+$0.6125
50,000+$0.575
500,000+$0.525
1,000,000+$0.4875
- +
Ext. Price(USD):$23,887.50
MOQ:39,000
Mult:39,000
SPQ:39,000
28-Pin Shroud Mini CT Series 24.89962mm × 5.9944mm × 7.4mm
Available Stock
3,710
Estimated Ship Time:6-7 working days
22+
20+$0.2392
500+$0.1096
- +
Ext. Price(USD):$4.78
MOQ:20
Mult:20
30-Pin Latch DF81 Series
Available Stock
2
Estimated Ship Time:4-6 working days
1+$0.2613
- +
Ext. Price(USD):$0.26
MOQ:1
Mult:1
SPQ:1
Shield, MTC Series
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$41.775
500+$40.0125
1,000+$35.5125
- +
Ext. Price(USD):$10,443.75
MOQ:250
Mult:250
SPQ:250
ASC 3P SPACER
Available Stock
14,800
Estimated Ship Time:3-5 working days
4+$0.0091
1,000+$0.0081
- +
Ext. Price(USD):$0.09
MOQ:10
Mult:1
32-Pin Shroud, Mini CT Series
Available Stock
3,220
Estimated Ship Time:3-5 working days
14+
1+$0.0941
200+$0.0831
400+$0.0727
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:400
Backshell, MTC Series
Pre-order
1,000
Factory Lead Time:22-26 weeks
10+$720.425
50+$463.475
100+$391.375
250+$360.475
500+$329.575
- +
Ext. Price(USD):$7,204.25
MOQ:10
Mult:10
SPQ:10
9-Pin Terminal Position Assurance (TPA) Economy Power Housings
Available Stock
18,400
Estimated Ship Time:4-5 working days
800+$0.0379
1,600+$0.0372
3,200+$0.0364
- +
Ext. Price(USD):$30.32
MOQ:800
Mult:800
SPQ:25,600
40-Pin Pull Tab AMP-LATCH Series, 101.6mm × 2.54mm × 1.65mm
Pre-order
4,000,000
Factory Lead Time:22-26 weeks
40,000+$0.195
- +
Ext. Price(USD):$7,800.00
MOQ:40,000
Mult:40,000
Yazaki
ECAD Model:
Connector Accessory, Rear Holder
Available Stock
3,975
Estimated Ship Time:4-6 working days
1+$0.0625
1,000+$0.0566
- +
Ext. Price(USD):$0.06
MOQ:1
Mult:1
SPQ:1
1-Pin Polarizing Device (Key, Plug, Post) Dynamic Series
Available Stock
3,002
Estimated Ship Time:14-17 working days
300+$0.1055
500+$0.0945
10,000+$0.0644
30,000+$0.0633
- +
Ext. Price(USD):$50.08
MOQ:530
Mult:1
SPQ:1
Terminal Housing 10-Pin TPA Economy Power II
Available Stock
1,480
Estimated Ship Time:6-7 working days
18+
20+$0.1231
300+$0.0565
- +
Ext. Price(USD):$2.46
MOQ:20
Mult:20
Backshell
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$436.1
50+$385.95
100+$324.1875
250+$308.7375
500+$285.6
- +
Ext. Price(USD):$10,902.50
MOQ:25
Mult:25
SPQ:25
Molex
ECAD Model:
Molex Retainer, Terminal Position Guarantee, 105415 Series, For Large Pitch Wire-to-Board 5.70mm
Available Stock
3,100
Estimated Ship Time:3-5 working days
23+
1+$0.1476
1,000+$0.1305
2,000+$0.1135
- +
Ext. Price(USD):$0.14
MOQ:1
Mult:1
SPQ:2,000
10-Pin Cap (Cover), Dust MTA-156 Series
Available Stock
2,000
Estimated Ship Time:3-5 working days
500+$0.1554
1,500+$0.1527
2,500+$0.1488
- +
Ext. Price(USD):$77.70
MOQ:500
Mult:500
Clip for 090III MLC Slot Type
Available Stock
140
Estimated Ship Time:6-7 working days
20+$0.1435
- +
Ext. Price(USD):$2.87
MOQ:20
Mult:20
Amphenol
ECAD Model:
16-Pin Strain Relief, Quickie™ Series
Pre-order
45,540
Factory Lead Time:10-16 weeks
24+
4,554+$0.9256
4,968+$0.9014
- +
Ext. Price(USD):$4,215.18
MOQ:4,554
Mult:414
SPQ:414
Available Stock
185
Estimated Ship Time:6-7 working days
20+$0.8217
- +
Ext. Price(USD):$16.43
MOQ:20
Mult:20
3M
ECAD Model:
34-Pin Strain Relief, 3000 Series, 47.8mm L × 6.1mm W
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.5567
- +
Ext. Price(USD):$0.55
MOQ:1
Mult:1
SPQ:1
Backshell
Pre-order
2,500
Factory Lead Time:22-26 weeks
25+$1,474.025
50+$1,304.4375
100+$1,095.725
250+$1,043.5625
500+$965.2875
- +
Ext. Price(USD):$36,850.62
MOQ:25
Mult:25
SPQ:25
25 / PageGoto