Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Available Stock
4,980
Estimated Ship Time:6-7 working days
24+
20+$0.0595
1,000+$0.023
- +
Ext. Price(USD):$1.19
MOQ:20
Mult:20
SDLSWP CLIP (Φ7.0)
Available Stock
191
Estimated Ship Time:3-5 working days
10+$0.0157
- +
Ext. Price(USD):$0.15
MOQ:10
Mult:1
TE Connectivity Automotive Connector Seal, Superseal Series, Wire Seal, Red
Available Stock
5,767
Estimated Ship Time:3-5 working days
1+$0.0157
- +
Ext. Price(USD):$0.01
MOQ:1
Mult:1
Molex
ECAD Model:
10-Pin Clip Mini Mi II 54596 Series Clamp Mount 7.4mm H
Available Stock
30
Estimated Ship Time:3-5 working days
07+
10+$0.1267
50+$0.1244
100+$0.1201
- +
Ext. Price(USD):$1.26
MOQ:10
Mult:10
SPQ:10
32-Pin Backshell, SRK Series
Available Stock
165
Estimated Ship Time:6-12 working days
1+$8.1359
10+$7.1596
500+$7.0294
1,000+$7.0294
- +
Ext. Price(USD):$24.40
MOQ:3
Mult:1
25-Pin Cap (Cover), Strain Relief, MTA-100 Series
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$0.925
2,000+$0.8875
2,500+$0.825
5,000+$0.7875
10,000+$0.7625
- +
Ext. Price(USD):$462.50
MOQ:500
Mult:500
SPQ:500
32-Pin Cap (Cover) DF38 Series
Pre-order
100,000
Factory Lead Time:14-26 weeks
10,000+$0.0941
- +
Ext. Price(USD):$941.00
MOQ:10,000
Mult:10,000
SPQ:10,000
16-Pin Cap (Cover) Strain Relief MTA-156 Series 63.4mm L × 11.94mm H
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.4
10,000+$0.305
- +
Ext. Price(USD):$800.00
MOQ:2,000
Mult:2,000
21-Pin Dust Cover, MTA-156 Series
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.75
250+$0.6375
500+$0.525
1,000+$0.4625
25,000+$0.4125
- +
Ext. Price(USD):$93.75
MOQ:125
Mult:125
SPQ:125
10-Pin Cap (Cover), Locking Micro Quadlok Series
Available Stock
2,000
Estimated Ship Time:4-5 working days
2,000+$0.2553
4,000+$0.251
8,000+$0.2456
- +
Ext. Price(USD):$510.60
MOQ:2,000
Mult:2,000
SPQ:2,000
Yazaki
ECAD Model:
Available Stock
3,008
Estimated Ship Time:6-7 working days
19+
20+$0.4288
1,000+$0.1729
- +
Ext. Price(USD):$8.57
MOQ:20
Mult:20
Shell Connector 48-Pin PQ50S Series
Pre-order
600
Factory Lead Time:14-26 weeks
60+$10.597
- +
Ext. Price(USD):$635.82
MOQ:60
Mult:60
SPQ:60
Yazaki
ECAD Model:
Available Stock
19,405
Estimated Ship Time:6-7 working days
20+$0.0844
- +
Ext. Price(USD):$1.68
MOQ:20
Mult:20
19-Pin Cap (Cover), Strain Relief MTA-156 Series, 75.28mm L × 11.18mm H
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.3288
10,000+$0.2538
- +
Ext. Price(USD):$657.60
MOQ:2,000
Mult:2,000
Backshell, MTC Series
Pre-order
1,600
Factory Lead Time:22-26 weeks
16+$630.6375
50+$405.6875
500+$288.5
1,000+$261.4375
- +
Ext. Price(USD):$10,090.20
MOQ:16
Mult:16
1-Pin Lock Plate Power Double Lock Series Board Mount 10.05mm L × 4.75mm H
Pre-order
11,000,000
Factory Lead Time:22-26 weeks
110,000+$0.0338
- +
Ext. Price(USD):$3,718.00
MOQ:110,000
Mult:110,000
Spring Opener, Dynamic Series
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$0.2038
5,000+$0.1725
10,000+$0.145
25,000+$0.1325
50,000+$0.1188
- +
Ext. Price(USD):$509.50
MOQ:2,500
Mult:2,500
SPQ:2,500
14-Pin Strain Relief AMPMODU Mod IV Series
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$0.45
8,000+$0.4
10,000+$0.37
25,000+$0.3425
- +
Ext. Price(USD):$1,800.00
MOQ:4,000
Mult:4,000
SPQ:4,000
Molex
ECAD Model:
40-Pin Clip Mini Mi II 54596 Series, Clamp Mount, 7.4mm H
Available Stock
104
Estimated Ship Time:3-5 working days
07+
10+$0.6155
100+$0.6051
500+$0.5839
- +
Ext. Price(USD):$6.15
MOQ:10
Mult:10
SPQ:10
TE Connectivity Double Lock Wedge Lock
Available Stock
2,500
Estimated Ship Time:3-6 working days
20+
500+$0.2589
- +
Ext. Price(USD):$129.45
MOQ:500
Mult:500
SPQ:500
Yazaki
ECAD Model:
Wire Seal with Black NBR
Available Stock
60,430
Estimated Ship Time:4-6 working days
1+$0.0341
1,000+$0.0311
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Metrimate Series Commoning Device, 36-Pin
Pre-order
10,400
Factory Lead Time:22-26 weeks
104+$70.8875
5,000+$68.4125
10,000+$64.5625
25,000+$59.6
- +
Ext. Price(USD):$7,372.30
MOQ:104
Mult:104
SPQ:104
7-Pin Terminal Position Assurance (TPA) Val-U-Lok Housings
Pre-order
40,000
Factory Lead Time:22-26 weeks
400+$0.1775
2,000+$0.1738
3,900+$0.17
8,000+$0.1638
10,000+$0.1525
- +
Ext. Price(USD):$71.00
MOQ:400
Mult:400
SPQ:400
Connector Cap (Cover) AMPMODU 50-Pin 50/50 Grid Series
Available Stock
1,910
Estimated Ship Time:3-5 working days
19+
1+$3.2269
188+$2.8558
375+$2.4831
- +
Ext. Price(USD):$3.22
MOQ:1
Mult:1
SPQ:375
11-Pin Terminal Position Assurance (TPA) Economy Power Series
Pre-order
1,800,000
Factory Lead Time:22-26 weeks
18,000+$0.0863
25,500+$0.075
100,500+$0.0575
- +
Ext. Price(USD):$1,553.40
MOQ:18,000
Mult:18,000
25 / PageGoto