Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
44-Pin Strain Relief Milli-Grid, 8mm H
Available Stock
51
Estimated Ship Time:3-5 working days
10+
10+$0.3044
50+$0.2992
100+$0.2887
- +
Ext. Price(USD):$3.04
MOQ:10
Mult:10
SPQ:10
Cable Clamp, 28-Pin, Clip Mount, Wire Mount
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$30.2125
1,000+$28.5375
100,000+$16.6
250,000+$15.6625
- +
Ext. Price(USD):$15,106.25
MOQ:500
Mult:500
TE Connectivity
ECAD Model:
TE DT Wedge Locking Device for Connector Terminal Calibration, Press-Fit Assembly
Available Stock
6,906
Estimated Ship Time:4-6 working days
26+
1+$0.5448
50+$0.4019
100+$0.2566
- +
Ext. Price(USD):$0.54
MOQ:1
Mult:1
SPQ:8,000
090II CLIP(Φ7.0-A)
Available Stock
18,674
Estimated Ship Time:4-6 working days
1+$0.0304
2,000+$0.0279
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Cap (Cover), Protective 20-Pin MTC100 Series
Pre-order
12,600
Factory Lead Time:22-26 weeks
126+$241.9125
250+$227.675
500+$213.45
1,000+$199.225
- +
Ext. Price(USD):$30,480.97
MOQ:126
Mult:126
DF1 Series 2-Pin Cap Cover Wire Mount
Available Stock
490
Estimated Ship Time:5-7 working days
1+$0.1944
- +
Ext. Price(USD):$0.19
MOQ:1
Mult:1
SPQ:100
Molex
ECAD Model:
Support Interface
Available Stock
1,440
Estimated Ship Time:6-12 working days
10+$1.6079
100+$1.5792
250+$1.5792
500+$1.5504
1,000+$1.5504
- +
Ext. Price(USD):$24.11
MOQ:15
Mult:1
4-Pin Cap (Cover), Micro MATE-N-LOK Series
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$1.6125
2,000+$1.45
5,000+$1.3875
- +
Ext. Price(USD):$1,612.50
MOQ:1,000
Mult:1,000
SPQ:1,000
JST
ECAD Model:
Retainer Clip, PND Series, 34-Pin, Fixed Mount, 33.55mm × 7.5mm
Available Stock
5,253
Estimated Ship Time:4-6 working days
1+$0.058
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
Aptiv
ECAD Model:
Connection Systems Connectors
Available Stock
1,787
Estimated Ship Time:3-5 working days
1+$1.0053
100+$0.7414
700+$0.4692
- +
Ext. Price(USD):$1.00
MOQ:1
Mult:1
SPQ:1,100
HARTING
ECAD Model:
HARTING SEK Series Locking Lever for Low-profile Male Header, Strain Relief
Available Stock
1,950
Estimated Ship Time:4-7 working days
10+$0.3513
20+$0.275
100+$0.2138
200+$0.2062
- +
Ext. Price(USD):$3.51
MOQ:10
Mult:1
Amphenol
ECAD Model:
2-Pin Wedge for Pins, AT Series™
Available Stock
1,960
Estimated Ship Time:4-6 working days
1+$0.0299
50+$0.0262
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
Amphenol
ECAD Model:
Bootloader 8-Pin ATM Series
Available Stock
178
Estimated Ship Time:6-12 working days
25+$0.9988
50+$0.9588
1,000+$0.8629
2,500+$0.8629
- +
Ext. Price(USD):$24.97
MOQ:25
Mult:1
Locking Plate, Power Triple Lock Series, 3-Pin, Board Mount, 25.4mm L × 8.48mm H
Pre-order
750,000
Factory Lead Time:22-26 weeks
7,500+$0.1588
10,000+$0.155
25,000+$0.1525
100,000+$0.1488
- +
Ext. Price(USD):$1,191.00
MOQ:7,500
Mult:7,500
Molex
ECAD Model:
Connector Accessories Terminal Position Assurance Retainer Straight Nylon White Mini-Fit Jr™ Bag
Available Stock
4,000
Estimated Ship Time:3-5 working days
25+
2,000+$0.1411
4,000+$0.1374
6,000+$0.1339
- +
Ext. Price(USD):$282.20
MOQ:2,000
Mult:2,000
SPQ:2,000
AMP-LATCH Universal Connector Ejector Lock, For Novo Socket and Female Socket Connectors Series 609, 622, 636
Available Stock
20,000
Estimated Ship Time:4-6 working days
20,000+$0.1273
40,000+$0.125
80,000+$0.1224
- +
Ext. Price(USD):$2,546.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Amphenol
ECAD Model:
Connector 4-Pin Wedgelock AT Series
Available Stock
4,221
Estimated Ship Time:4-6 working days
1+$0.0913
1,000+$0.077
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
Molex
ECAD Model:
Available Stock
400
Estimated Ship Time:4-6 working days
18+
30+$2.5019
- +
Ext. Price(USD):$75.05
MOQ:30
Mult:1
SPQ:112
Yazaki
ECAD Model:
Connector Accessories, Wire Seal
Available Stock
4
Estimated Ship Time:3-5 working days
24+
1+$0.099
22,500+$0.0743
45,000+$0.0496
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:45,000
Molex
ECAD Model:
12-Pin Shroud C-Grid SL Series
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.9375
4,000+$0.8375
10,000+$0.8125
- +
Ext. Price(USD):$1,875.00
MOQ:2,000
Mult:2,000
Amphenol
ECAD Model:
6-Pin Boot, ATM Series
Available Stock
380
Estimated Ship Time:6-12 working days
25+$0.9338
50+$0.8964
1,000+$0.8068
2,500+$0.8068
- +
Ext. Price(USD):$24.27
MOQ:26
Mult:1
Molex
ECAD Model:
8-Pin Wedgelock ML-XT 93444 Housing
Available Stock
23,360
Estimated Ship Time:7-9 working days
18+
455+$0.1287
5,000+$0.1232
10,000+$0.1177
- +
Ext. Price(USD):$58.55
MOQ:455
Mult:1
SPQ:1
10-Pin Terminal Position Assurance (TPA) Economy Power Series
Pre-order
680,000
Factory Lead Time:22-26 weeks
6,800+$0.1363
25,000+$0.1175
100,000+$0.0913
- +
Ext. Price(USD):$926.84
MOQ:6,800
Mult:6,800
Screws, Dynamic Series, Screw Mount
Available Stock
6,004
Estimated Ship Time:7-9 working days
12+
1,100+$0.1078
2,600+$0.1056
5,200+$0.1045
- +
Ext. Price(USD):$118.58
MOQ:1,100
Mult:1
SPQ:1
Molex
ECAD Model:
30-Pin Module HDX 98633
Available Stock
11
Estimated Ship Time:4-6 working days
1+$0.9675
- +
Ext. Price(USD):$0.96
MOQ:1
Mult:1
SPQ:1
25 / PageGoto