Connectors Accessories

Results:

Connector accessories complete specific mechanical, retention, sealing and protection functions within a rectangular connector system. This category includes terminal locks, retainers, wedge locks, seals, gaskets and backshells. Start with the main connector manufacturer, series and housing part number, then match the accessory by function, installed position and specified compatibility.

Start with the Missing Function

Identify what the completed connector assembly needs before searching by accessory appearance. One connector system may require several accessories serving different mechanical or environmental roles.

Required function Typical accessories
Prevent terminal back-out TPA, secondary lock or terminal retainer
Secure the mating pair CPA, wedge lock, latch or locking component
Seal the interface Interface seal, wire seal, gasket or cavity plug
Protect the cable exit Backshell, boot or strain-relief component
Support mounting or routing Bracket, clip, housing retainer or wire guide
Protect an unmated interface Dust cap or protective cover

Use the Main Connector as the Compatibility Key

Manufacturer → Product series → Housing part number → Plug or receptacle side → Accessory part number

Confirm the accessory in the manufacturer’s product drawing, application specification or accessory table. Continue checking positions, housing or shell size, orientation and product revision even when two components share the same series name. If the main connector body has not been selected, begin with Rectangular Connector Housings.

Match the Installed Position

Installation point Compatibility checks
Contact cavity Terminal size, locking lance, TPA orientation and insertion sequence
Mating interface Positions, keying, interface seal and connector side
Wire entry Wire gauge, insulation diameter and individual wire seal
Rear of housing Straight or right-angle exit, backshell size and cable clearance
Panel or enclosure Gasket, bracket, clip, mounting feature and panel thickness
Unused cavity or open face Cavity plug, dust cap and required environmental protection

Terminal locks and retainers must also match the conductive parts installed in the housing. Browse Rectangular Connector Contacts for compatible pins, sockets and crimp terminals.

Build the Complete Sealing System

Environmental protection can depend on several coordinated components: the sealed housing, mating-interface seal, individual wire seals, cavity plugs for unused positions, and any specified backshell or boot. Match each wire seal to the permitted insulation diameter and install every component in the manufacturer’s stated sequence.

A seal or gasket does not establish an IP rating by itself. Apply a sealing or protection rating only when it is specified for the complete connector assembly in its fully mated and correctly installed condition.

Separate the Retention Functions

  • Terminal retention: Holds each contact inside its housing cavity.
  • TPA or secondary lock: Confirms and reinforces terminal seating.
  • CPA: Confirms that the two connector housings are fully mated.
  • Wedge lock: Retains or positions contacts in specified connector families.
  • Panel retainer: Secures the connector housing to its mounting feature.
  • Strain relief: Reduces cable force and bending at the wire termination.

For more detail on housings, terminals, seals, TPA/CPA components and connector assembly records, see the Wiring Harness Connector Types guide.

Complete the Accessory BOM

Record the main housing, mating connector, contacts, seals, locks, backshell or strain-relief parts, mounting hardware and required tooling. Include the quantity of every accessory; one connector may need multiple individual wire seals, cavity plugs and retention components.

If the complete connector type or connection path has not yet been selected, return to Rectangular Connectors before finalizing the accessory list.

Read More
Connectors AccessoriesResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol Industrial Cable Connector Cover, AT Series, 12 Pos, Receptacle
Available Stock
595
Estimated Ship Time:4-6 working days
1+$0.3487
200+$0.2887
- +
Ext. Price(USD):$0.34
MOQ:1
Mult:1
14-Pin Stress Relief Minitek, 19.6mm L × 6.6mm H
Pre-order
4,340,000
Factory Lead Time:13 weeks
8,680+$0.4996
- +
Ext. Price(USD):$4,336.52
MOQ:8,680
Mult:434
SPQ:434
Mounting Kit, MTC Series
Pre-order
700
Factory Lead Time:22-26 weeks
7+$206.2625
14+$184.2625
50+$118.55
100+$100.1
250+$92.2125
- +
Ext. Price(USD):$1,443.83
MOQ:7
Mult:7
SPQ:7
JST
ECAD Model:
8-Pin Retainer, Fixed Mount, 19mm L
Available Stock
12,806
Estimated Ship Time:4-6 working days
1+$0.0329
500+$0.0283
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
TE Connectivity Strain Relief Connector Cover, Black Fiber-Filled Nylon, For Micro Mate-N-Lock Receptacle Housing, 293732-1
Pre-order
20,000
Factory Lead Time:22-26 weeks
200+$0.8
400+$0.675
600+$0.575
1,000+$0.475
5,000+$0.4625
- +
Ext. Price(USD):$160.00
MOQ:200
Mult:200
SPQ:200
Aptiv
ECAD Model:
Connector Accessories Seal Straight Nylon Blue
Available Stock
12,591
Estimated Ship Time:3-5 working days
26+
1+$0.0814
7,040+$0.06
14,080+$0.038
- +
Ext. Price(USD):$0.08
MOQ:1
Mult:1
SPQ:10,000
Amphenol
ECAD Model:
8pin Strain Relief Quickie™ Series
Available Stock
1,000
Estimated Ship Time:4-6 working days
23+
1+$0.3135
- +
Ext. Price(USD):$0.31
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
12-Pin Shroud C-Grid SL Series Wire Mount Connector
Available Stock
60
Estimated Ship Time:3-5 working days
13+
1+$1.7198
30+$1.6911
50+$1.6317
- +
Ext. Price(USD):$1.71
MOQ:1
Mult:1
SPQ:1
21-Pin Dust Cover, MTA-156 Series
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.625
500+$0.5875
1,000+$0.5125
25,000+$0.45
50,000+$0.4
- +
Ext. Price(USD):$78.12
MOQ:125
Mult:125
SPQ:125
6-Pin Shroud AMPMODU MTE Series
Available Stock
2,400
Estimated Ship Time:4-5 working days
1,200+$1.0196
2,400+$1.0023
4,800+$0.9807
- +
Ext. Price(USD):$1,223.52
MOQ:1,200
Mult:1,200
SPQ:2,400
Molex
ECAD Model:
40-Pin Shroud C-Grid SL Series, Clip Mount, Free Hanging
Available Stock
39
Estimated Ship Time:3-5 working days
06+
1+$4.1784
10+$4.1086
20+$3.9644
- +
Ext. Price(USD):$4.17
MOQ:1
Mult:1
SPQ:1
Cap (Cover), Dust MTA-156 Series 18-Pin 12.07mm H
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$0.6625
250+$0.5625
500+$0.4625
1,000+$0.4125
25,000+$0.365
- +
Ext. Price(USD):$82.81
MOQ:125
Mult:125
SPQ:125
6-Pin Housing
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$5.4625
500+$4.875
2,000+$3.9875
5,000+$3.55
- +
Ext. Price(USD):$1,365.62
MOQ:250
Mult:250
SPQ:250
CT Series 24-Pin Connector Holder, Bracket Mount, 28.3mm × 7.55mm × 6.65mm
Available Stock
18,300
Estimated Ship Time:3-4 working days
100+$0.0595
200+$0.0575
300+$0.056
- +
Ext. Price(USD):$5.95
MOQ:100
Mult:1
SPQ:200
Sumicon 1600 Series Connector, 28-Pin Shell
Available Stock
5
Estimated Ship Time:4-6 working days
1+$6.5826
- +
Ext. Price(USD):$6.58
MOQ:1
Mult:1
SPQ:1
TE Connectivity
ECAD Model:
WEDGELOCK FOR 4-WAY DT PLUG
Available Stock
17
Estimated Ship Time:3-5 working days
24+
1+$0.091
625+$0.0805
1,250+$0.0699
- +
Ext. Price(USD):$0.09
MOQ:1
Mult:1
SPQ:1,250
JST
ECAD Model:
24-Pin Retainer Clip PND Series Fixed Mount
Available Stock
9,000
Estimated Ship Time:4-6 working days
1+$0.0502
- +
Ext. Price(USD):$0.05
MOQ:1
Mult:1
SPQ:1
Gasket DMC-MD Inserts
Available Stock
3,000
Estimated Ship Time:5-7 working days
25+
1,000+$1.9747
2,000+$1.9747
4,000+$1.9747
- +
Ext. Price(USD):$1,974.70
MOQ:1,000
Mult:1,000
16-Pin Cap (Cover), AMPMODU Mod IV Series
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$2.825
5,000+$1.9875
10,000+$1.9
25,000+$1.8
- +
Ext. Price(USD):$7,062.50
MOQ:2,500
Mult:2,500
SPQ:2,500
3-Pin Wire Mount, Free Hanging, TH 20.32mm × 14.73mm × 14.73mm
Available Stock
581
Estimated Ship Time:6-7 working days
20+$0.2694
- +
Ext. Price(USD):$5.38
MOQ:20
Mult:20
13-Pin Cap (Cover), Dust, MTA-156 Series, 12.07mm H
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$0.45
500+$0.375
1,000+$0.3163
25,000+$0.2825
50,000+$0.2475
- +
Ext. Price(USD):$112.50
MOQ:250
Mult:250
SPQ:250
Mounting Base, DMC-MD Inserts, Bracket Mount, TH
Pre-order
10,000
Factory Lead Time:22-26 weeks
100+$35.5875
200+$28.4875
500+$25.6375
1,000+$23.4375
- +
Ext. Price(USD):$3,558.75
MOQ:100
Mult:100
SDL SWP CLIP, Φ7.0mm
Available Stock
8,032
Estimated Ship Time:4-6 working days
1+$0.0386
100+$0.0351
- +
Ext. Price(USD):$0.03
MOQ:1
Mult:1
SPQ:1
Available Stock
176
Estimated Ship Time:6-7 working days
25+
20+$0.9453
189+$0.4323
- +
Ext. Price(USD):$18.90
MOQ:20
Mult:20
TE Connectivity Heavy Duty Connector Interface Seal, Power Versa-Lock 5.0 Series, 2 Contacts
Available Stock
5
Estimated Ship Time:3-4 working days
25+
1+$0.4885
2+$0.4722
3+$0.46
- +
Ext. Price(USD):$0.48
MOQ:1
Mult:1
SPQ:2
25 / PageGoto